Sigelei Mechnical Mods

[Stratzilla]

OOOoooh they have finally have an individual listing for the #19 and it's a magnetic bottom firing button.
TELESCOPIC-19_TELESCOPE_SIGELEI Electronic Cigarette -

I want it even more now. I can't wait till someone can coop orders in for various Sig mods.

I'd be down for a co-op.

 

[manji1]

Are the #19 and #20 available anywhere? These look pretty tempting.

 

[Telescope Neil]

#20, damn. if that thing had a 100% flat top cap, then that would be just too sexy for Genesis atomizers. I could understand the slightly raised 510 connection though as it's required to have proper airflow with cartos and clearos.

 

[4matic]

#20, damn. if that thing had a 100% flat top cap, then that would be just too sexy for Genesis atomizers. I could understand the slightly raised 510 connection though as it's required to have proper airflow with cartos and clearos.

Nothing some sand paper can fix.

 

[Kimy van Manchit]

38 of them!

last month i bought a number 7...
at first I thought it was bad mod because its not as great puff K100 mod from my friend ... Then I switch the contact to the brass screw (btw i dont find spring Brass)
n now it work like a beast...hahah

 

[Telescope Neil]

really, that's possible? I hardly know anything about carpentry or modding or such, but is there a type o sandpaper i should use for doing this? If I could do this then I'm buying one!

 

[lynch]

Are the #19 and #20 available anywhere? These look pretty tempting.

#20 on a pre order here

segelei mechanical mod #20 with brass plating made of stainless steel

 

[qorax]

Guys,

Three queries on the Sigelei Mechanical #8 pls:



1. What's the dia of the Mod?
2. Which tank system best matches it, aesthetically, dia wise? Pics would be nice.
3. Must the 18650 protected battery be 'flat-top' OR does it accept 'button-top' batteries too?

Thanx in adv.
_______________________________________
*Mine's on the way from Hoosier Vapes, with a F-16

 

[hoodieweather]

Anybody have the #20 yet? I am so tempted to buy one!

 

[stimps403]

I'm not sure what the exact diameter of the #8. I've used an AGA-T and Term; both look good. It's larger than the AGA-T and very close to the same size as the Term. If I'd add to guess, the tube is 22mm but the caps might be slightly larger; possibly because of the chrome plating on the brass (?). I'm at work and can't post pics right now.

 

[WinchellNomNom]

Guys,

Three queries on the Sigelei Mechanical #8 pls:



1. What's the dia of the Mod?
2. Which tank system best matches it, aesthetically, dia wise? Pics would be nice.
3. Must the 18650 protected battery be 'flat-top' OR does it accept 'button-top' batteries too?

Thanx in adv.
_______________________________________
*Mine's on the way from Hoosier Vapes, with a F-16

The caps have Qc issues and come in at 22.5 to a little over 23mm. Pretty large discrepancy. Tubes are around 22mm, but just a little bit larger. I have 2 #8s and 2 #13s which use the same caps and tube diameters.

Attys that look good on the 8 in my opinion:

DRA XL (22mm diameter)
Nimbus (20mm)
UD AGI (22mm)
RSST (22mm)

Most of these pics are of the 13 since I have them uploaded.

This top cap is near 22mm stock.

The top cap on this one was larger than 23mm. I sanded it down to a hair larger than 22mm.

 

[qorax]

^^Hey Thanx Winchell, that was awesome!

Going by ur pics I understand that all the probable (best) tanks match the dia of the tube, but not the caps, correct? And what r those last 2 pics... the ones with steel-but-glass-tank? They r my type I guess.

 

[WinchellNomNom]

^^Hey Thanx Winchell, that was awesome!

Going by ur pics I understand that all the probable (best) tanks match the dia of the tube, but not the caps, correct? And what r those last 2 pics... the ones with steel-but-glass-tank? They r my type I guess.

Anything 22mm matches the tubes and may match the caps if you get properly sized caps. The last atty is a Smoktech RSST.

 

[4matic]

Wow....can you refinish my 13 too please?! and is that the ugi dripper?

The caps have Qc issues and come in at 22.5 to a little over 23mm. Pretty large discrepancy. Tubes are around 22mm, but just a little bit larger. I have 2 #8s and 2 #13s which use the same caps and tube diameters.

Attys that look good on the 8 in my opinion:

DRA XL (22mm diameter)
Nimbus (20mm)
UD AGI (22mm)
RSST (22mm)

Most of these pics are of the 13 since I have them uploaded.

This top cap is near 22mm stock.

The top cap on this one was larger than 23mm. I sanded it down to a hair larger than 22mm.

 

[stimps403]

That's some nice work on the #13 Winchell.

 

[Jeremy Evans]

I really want a #19

 

[WinchellNomNom]

Wow....can you refinish my 13 too please?! and is that the ugi dripper?

Yes agi in drip mode. Grabbing another from that coop going right now. Definately worth the coop price of 24.00.

 

[WinchellNomNom]

Pic of the 8 next to the 13

 

[RXDI]

I have a #8 on the way and wanted to know if any of my current batteries will work with it... or if I will need to purchase a different battery.

(1) Efest IMR 18650 2000mAh
(2) Efest IMR 18350 800mAh
(2) Panasonic CGR18650CH 2250mAh

TIA!

 

[g3n3r1c]

I have a #8 on the way an wanted to know if any of my current batteries will work with it... or if I will need to purchase a different battery.

(1) Efest IMR 18650 2000mAh
(2) Efest IMR 18350 800mAh
(2) Panasonic CGR18650CH 18650 2250mAh

TIA!

All of the above should work just fine with #8, but I'd suggest the Panny