Sigelei Mechnical Mods
- Thread starter pillowking
- Start date
- th_trl_thread_readers 0
- Status
Heres my 19
![20130521_145558[1].jpg](https://www.e-cigarette-forum.com/data/attachments/108/108414-f16c78895cd656bb4004361f6d0d05f1.jpg "20130521_145558[1].jpg")
Modded top and bottom brass screws. Hits fine. Still think my chichi hits harder with fresh batt.
Modded top and bottom brass screws. Hits fine. Still think my chichi hits harder with fresh batt.
There's a webshop in the Philippines that sells bottom switches for Sigelei telescopes. I am wondering if it is a viable fix for the 19 bottom switch. It doesn't have a locking mechanism unfortunately.
https://www.facebook.com/Vaperszone
thoughts?
Ask them, or if a member has that version and a #19 could maybe try it to see if it works
Edit. Looking at them they look to short
Another data point for anyone interested (and I've lost track of the whole thread, so sorry if this seems superfluous):
2 Sigelei No.8s delivered from America to the UK in a bit over 2 weeks. These are the earlier ones, with a well around the connector (I think this might be called an ego well?), and no logo. They were marked as 'gifts', which I didn't ask them to do, but they incurred customs charges anyway (£8 flat handling fee, ~£16 total - still cheaper than it would have been had I bought them in the UK [edit - sorry, jumping the gun, checked my maths such as and it's actually pretty much the same
] ).
They work very well out of the box - I haven't measured the voltage drop, but no issues with hot buttons, rattle, machining defects, or vapour production. I'll probably sand the easy to do bits anyway on principle
And they're really very nice to hold in the hand. Solid feeling, and attractive (simple, relatively understated even though they're quite shiny) to look at.
Thanks to everyone for the great information in this thread.
2 Sigelei No.8s delivered from America to the UK in a bit over 2 weeks. These are the earlier ones, with a well around the connector (I think this might be called an ego well?), and no logo. They were marked as 'gifts', which I didn't ask them to do, but they incurred customs charges anyway (£8 flat handling fee, ~£16 total - still cheaper than it would have been had I bought them in the UK [edit - sorry, jumping the gun, checked my maths such as and it's actually pretty much the same
] ).They work very well out of the box - I haven't measured the voltage drop, but no issues with hot buttons, rattle, machining defects, or vapour production. I'll probably sand the easy to do bits anyway on principle
And they're really very nice to hold in the hand. Solid feeling, and attractive (simple, relatively understated even though they're quite shiny) to look at.
Thanks to everyone for the great information in this thread.
Last edited:
Another data point for anyone interested (and I've lost track of the whole thread, so sorry if this seems superfluous):
2 Sigelei No.8s delivered from America to the UK in a bit over 2 weeks. These are the earlier ones, with a well around the connector (I think this might be called an ego well?), and no logo. They were marked as 'gifts', which I didn't ask them to do, but they incurred customs charges anyway (£8 flat handling fee, ~£16 total - still cheaper than it would have been had I bought them in the UK).
They work very well out of the box - I haven't measured the voltage drop, but no issues with hot buttons, rattle, machining defects, or vapour production. I'll probably sand the easy to do bits anyway on principle
And they're really very nice to hold in the hand. Solid feeling, and attractive (simple, relatively understated even though they're quite shiny) to look at.
Thanks to everyone for the great information in this thread.
You have a pm hehe
Just got my #19. And wow, I didnt quite understand how badly engineered this switch is, or at least the QC. Got some work cut out for me.
My #8 with sanded top contact alone hits great as far as i need, but the bottom GG type button will get hot once and a while; whats up with that?
- any comments on the #20 V2 ?
- any comments on the #20 V2 ?
Any seconds to this suggestion?
http://www.e-cigarette-forum.com/fo...9-mods-yet-another-request-apv-sub-forum.html
http://www.e-cigarette-forum.com/fo...9-mods-yet-another-request-apv-sub-forum.html
The #32's started shipping from Vaportek today.
More cheap mods to mess with inbound to your doorstep soon *wrings hands while grinning*.
Mine should be here by Sat..like I need another Sigelei...I've lost track of how many I have going now
More cheap mods to mess with inbound to your doorstep soon *wrings hands while grinning*.
Mine should be here by Sat..like I need another Sigelei...I've lost track of how many I have going now
Yes, the firing pin screws INTO the button which is actually part of a threaded tube. Two pair of needle nose pliers should suffice although the button may need a little heat applied to it to coax it... Most are held in place with loctite or similar adhesive and can be very stubborn without a touch of heat (a bic lighter will work). Detailed instructions and photos are already in this thread too, probably 100+ pages back
PS: Be VERY ready to catch that tiny spring inside as it likes to fly out when the button is disassembled!!!
Anyone want to start a #8 mod thread?
no link but actually its a Sig Roller aka #20
kidneypuncher sold out of pre orders... $40
kidneypuncher sold out of pre orders... $40
Yup. They are buried in this thread too
This huge thread, that no one really bothers to read all the way from the beginning any more, is the reason I've started THIS thread:
http://www.e-cigarette-forum.com/fo...9-mods-yet-another-request-apv-sub-forum.html
Please show your support and share your opinions?
So is the #20 v1 and v2 the same thing then I own a #20 and its a roller clone
Well I've looked pretty heavily, but would easily imagined over looked lol Didn't see any #8s specifically. 13s and 19s only. This thread made love my number 8, and I'm excited for another lol
- Status
Similar threads
