SINUOUS P80

[52anddone]

Are the Chinese on some kind of Holiday now ??

 

[Dropmyload]

Been looking for a regulated tube mod and haven't seen anything I liked so far.

I think I'll get this one.

 

[Dropmyload]

@Mooch had a list of the "best" 3000mAh batteries on PBusardo's site:

#1.Samsung 30Q..."many recycles, retains more capacity than VTC6".

#2.Sony VTC6.

#3.LG HG2..."lowest retaining capacity of the 3".

..

Just a couple of questions

The samsung 30q is 15 amps. Will it work with this mod?

Sedondly, do I need flat top or button top battery for this mod?

Thanks.

 

[ricks]

Just a couple of questions

The samsung 30q is 15 amps. Will it work with this mod?

Sedondly, do I need flat top or button top battery for this mod?

Thanks.

Those batteries should work and I don't think they make a button top. I only use flat tops on mine.

 

[puffon]

Mooch has tested the Samsung 30q to be 20amp.

 

[Hawise]

Just a couple of questions

The samsung 30q is 15 amps. Will it work with this mod?

Sedondly, do I need flat top or button top battery for this mod?

Thanks.

Flat top, and as @puffon says the 30Q was able to provide 20A safely on Mooch's tests. If you want to check out the other options, Mooch's list of recommended batteries is here:

Mooch's Recommended Batteries | E-Cigarette Forum

As to whether it will work with the P80 - yes but...

A single 20A battery can be used up to 50 - 60 w. As I don't want to go over 60 w, I'm happily using a Samsung 30Q in my P80 at the moment. If you want to go higher, you'll need to look at 25 or 30 A batteries. The problem with them is that capacity (mAh) drops as the amp rating rises, so a charge won't last as long.

For what it's worth, the most popular batteries for vaping tend to be the 20-ish amp ones as they offer a good balance of CDR and capacity. It's just important to know their limits.

 

[52anddone]

I'm thinking of trying these when I finally get my P80.

Sanyo NCR18650GA 10A 3300mAh 18650 Bench Retest Results...a great 12A battery

The 25r's and VTC4's I have are almost 3 years old, and while still working Great in my other mods (with only .1v to .15v sag under load) the NCR18650ga 10a batteries look better for my application. 95% of the time I am below 10 watts, and the rest I am below 20 watts, on regulated mod's, I've never owned a Mech.

 

[ricks]

I'm thinking of trying these when I finally get my P80.

Sanyo NCR18650GA 10A 3300mAh 18650 Bench Retest Results...a great 12A battery

The 25r's and VTC4's I have are almost 3 years old, and while still working Great in my other mods (with only .1v to .15v sag under load) the NCR18650ga 10a batteries look better for my application. 95% of the time I am below 10 watts, and the rest I am below 20 watts, on regulated mod's, I've never owned a Mech.

I'd use them. See any good deals on them?

 

[Letitia]

Those batteries should work and I don't think they make a button top. I only use flat tops on mine.

They do make a button top, accidently ordered 4. I got lucky and was able to sell them.

 

[52anddone]

I'd use them. See any good deals on them?

I've not yet checked, but will shortly. My P80 still hasn't shipped, and I ordered it on Nov. 10th. I just got on their site and shot them a message.

I just did a quick check and here's what I found;

Sanyo NCR18650GA 3500mAh 10A Battery

18650 Sanyo NCR18650GA 3500mAh High Discharge Flat Top - Batteries - Batteries, Chargers, and PowerPax Carriers

 

[ian91]

52, I have been using these for the last couple of years. I vape around 18-20 watts and try to keep my amps just over 5amps so only using 50% of battery capacity. I have one in my P80 right now.

LG 18650 MJ1 3500mAh

 

[ian91]

52, I know that you like the Hussar. It is a good combination with the P80. I bought one of the Coppervape Steam Tuner clones for it. Shortens and lightens the Hussar considerably and still gives you 4ml capacity.

$6.56 Replacement Long Tank Set for Coppervape Hussar RTA Atomizer at FastTech - Worldwide Free Shipping

 

[bigbob2322]

Wismec Sinuous P80 TC Mod

Health Cabin has the Sinuous P80 for $13.70

 

[Doug5283]

I saw that too with HC. Awful tempting. The P80 has a nice feel to it. Hate to admit it, but the "too good to be true" rule popped into my head. Think I'll end up doing it anyway.

 

[Letitia]

Only the blue is in stock.

 

[bigbob2322]

Only the blue is in stock.

I like blue.

 

[ricks]

Wismec Sinuous P80 TC Mod
$13.70 but $15.67 shipping and I think it's one for the blue.

 

[bigbob2322]

Wismec Sinuous P80 TC Mod
$13.70 but $15.67 shipping and I think it's one for the blue.

Ouch- didn't see that!

 

[puffon]

Wismec Sinuous P80 TC Mod
$13.70 but $15.67 shipping and I think it's one for the blue.

Go to the regular check out, not the PP link.
Once there you get the $5.76 shipping with the option to check out with PP.
Use code ECF for .41 off

 

[puffon]

Ouch- didn't see that!

see above^^^^