Skinny narrow Drip tip?

[Penner]

Hi,
I have the Gotvapes Flux XL, which works really well, but I want to fit it with a drip tip, so that the Flux XL + the drip tip, fit inside the Gotvapes "pencap cover":

Reviews: GotVapes eGo Cone w/ Screw-on Cap - PEN-CLIP STYLE STAINLESS [gv-egoVERTICALCONE-penclipSTNLS] - $7.50 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more

The Flux XL come with a small rubber drip tip that fits, but after a while, it doesn't taste good (you are getting a heated rubber taste from it).

Any suggestions?

Thanks!

 

[Briar]

The regular 510 drip tip doesn't fit under the cap?

 

[Penner]

Oh I see what the problem is now. I had the drip tip ON the Flux XL, & tried to put that assembly in the pencap's sleeve. Turns out the issue is the Flux fits thru the entire sleeve, except it is a little bit too big of a diameter to fit thru the top of the sleeve, even with the drip tip off.

 

[burns_erin]

I have both the regular and the mini chrome pawn drip tips, and they both work fine on my xl fluxos with the pen cap sleeve.

Sent from my G2...so please excuse the spelling errors, correct gets the best of me.

 

[willdupre]

I find the thread lug for the part that holds the cap is just a bit narrow for the new frosted fluxo tubes, have considered using my dremel tool to bore out the lug a bit more to allow clearance but haven't tried it yet.

Edit: I decided to give it a try, used the grinding head on my dremel, took a while as I didn't want to grind too fast and cut through the lug at all but finally got the new clearo xl to fit, it will fit with all but my longest drip tips, any tip that's 3/4 inch or shorter inserted works.

 

[Briar]

I find the thread lug for the part that holds the cap is just a bit narrow for the new frosted fluxo tubes, have considered using my dremel tool to bore out the lug a bit more to allow clearance but haven't tried it yet.

Hmmm. Is it just tight, or is it that they don't fit at all?

 

[willdupre]

they don't fit at all without grinding out the inside of the threaded lug that the cap screws onto. (see my edit)

 

[Briar]

they don't fit at all without grinding out the inside of the threaded lug that the cap screws onto. (see my edit)

Oh. What a bummer. I was going to get one of those sleeves... Grinding is not for me, tho. Too much dust. Maybe in the summer, when I can do it outside...

 

[harmonic]

my xl fluxos fit with the pen caps was just a very tight fit and put the drip tip on after craming the sleeve on. in my case it seemed to restrict the air flow so i dont use that setup anymore lol
hope that helps