I can't find where to do that on Fed Ex, if you could point me in the right direction I would appreciate it...
- Status
That happened to me too when I got my TFV4. The thing is screwed together TIGHT. You need to grab the top and bottom hardware and screw them apart. Eventually it will come apart. The way it is screwed together is that the chimney screws into the top of the coil, similar to the Aspire tanks. With mine, the glass actually sticks to the bottom hardware when I unscrew it. Once apart, I can take the glass out and fit it into the top hardware. This is why I said that the only way I can replace the coil on this thing is to wait until the tank is empty.
I found the manual adjustments on the CUBE 2 pretty easy to work with after all. It's going to be interesting to vape at night with the lights off. The body of the Cube is just slightly larger than the Sigelei 150 w. Just for giggles I slipped the silicone cover from the Sig onto the Cube and it fits, albeit a bit tight it didn't trigger the power button. Still undecided on a wrap, wish they had silicone covers for this mod.
I did a track by address, then I as I searched the fed ex site I found a tab that had the shipping.
Bahaha, went to try to unscrew the tank and the whole top of the tank came off, the glass and all is still connected to the bottom, got the top part back on, but can't get the bottom unscrewed, the top just keeps popping off.
I put it in the freezer, we will see after a few minutes if I'm going to have to wait for hubby to get home to get it unscrewed.
I the meantime, I'm vaping away with another tank on the xcube.
My daughter is fascinated with the lights, said it looked like a night club..
I put it in the freezer, we will see after a few minutes if I'm going to have to wait for hubby to get home to get it unscrewed. I the meantime, I'm vaping away with another tank on the xcube.
My daughter is fascinated with the lights, said it looked like a night club..
Hold the mouse over "track". It might be the second column try "track by reference". There is some way to input the address.
Woohoo! I got mine today, thank you @SmokeyJoe and Smok! Now, does anyone know if there are replacement drip tips? I'm allergic to nickel, so I'm going to have to replace this one or cover it somehow...
You can use any you want and I think it's a stainless steel drip tip
If you have a small c clamp you can put that on the bottom and easily unscrew it.Bahaha, went to try to unscrew the tank and the whole top of the tank came off, the glass and all is still connected to the bottom, got the top part back on, but can't get the bottom unscrewed, the top just keeps popping off.
I the meantime, I'm vaping away with another tank on the xcube.
Well I bought some paint and I'm going to make it look like the evic-vt I had
As stated, either a false positive, or just like almost everything else that comes out of china, has phone home scripting. Always use a VM for these things.
Glad to see you've got it worked out.
I hate to admit this, but I stuck it right into watt mode, I don't have a smart phone and I'm scared to try to hook it up with my computer. I managed to change the button color to jumping though.I will play with the tank later, I wanted to look at the coil, but I can't get the bottom off the tank.
The glass section is stuck in pretty tight into the base. You have to pull really hard. I was scared that the glass would shatter in my hand. Be careful because my O-ring is now broken as it ripped when I finally got the glass out.
www.twitter.com/v_a_p_e
A few minutes in the freezer worked, but the top still popped off while I was unscrewing it. Now I need to find a place with extra o-rings because it looks like the one on the bottom is messing up, some of it is stuck to the side of the tank. Not sure why they didn't include some with the tank. Anyway, I'm about to fill it up and see how she vapes. So excited. 
Anyway, I'm about to fill it up and see how she vapes. So excited.
The Smok VTC tank does the same thing, lost one of the two glass tanks to this already. Never leave them for too long screwed together, they do the vulcan mind meld with the goopy seals and it's over.
2nd vape mail of the day arrived
any one else having a problem with the smok bec app not working? it shuts down before it even gets running.
I am. And according to the website the APP is the only way to get Titanium or Stainless support to work in the Cube. I have double checked all my settings and version numbers and there is no reason for it not to work. Seems to be a common issue, but I cannot find any web pages suggesting a fix.
- Status
Similar threads
