Ended Smoktech giveaway! 250 Cloud Machines to win...

[Kprthevapr]

The rubber o-ring in the box is a spare for the chimney, the glass tube is a spare in case you break the one already on the tank.

You should put juice inside the coil on the cotton, slowly, until the cotton on the outside of the coil looks wet/slightly changes colour.

If it's wet you only need to give it 5mins or so to wick properly.

It would have helped a lot of people if they put some sort of instructions in the box, like ALL the other manufacturers do...

Sent from my GT-N7105 using Tapatalk

Instructions would save a lot of time! And there would be less headaches for those who haven't used a tank in a loooooong time, like me.

 

[danjaman]

Instructions would save a lot of time! And there would be less headaches for those who haven't used a tank in a loooooong time, like me.

Definitely, but it is what it is...

No instructions and an Xcube is better than no instructions and no Xcube! [emoji6]

Sent from my GT-N7105 using Tapatalk

 

[Kprthevapr]

I got my tank workin now. The oring was wonky. How long do the coils last that come with it?

 

[danjaman]

I got my tank workin now. The oring was wonky. How long do the coils last that come with it?

The triple is still going strong on mine, since the day I got it, not sure when that was, but I was one of the first few to receive one.

Sent from my GT-N7105 using Tapatalk

 

[danjaman]

I think it was the 28th September that I got it.
The triple has had daily use since then, it's seen about 150-200mls so far.

Sent from my GT-N7105 using Tapatalk

 

[Jbb8415]

So according to Madvapes Facebook page, they have shipped 100 units, and have 38 left to send out....

 

[kameronn5]

So according to Madvapes Facebook page, they have shipped 100 units, and have 38 left to send out....

I dont see why they just wouldnt send the extra 38 out with that 100. If they really have all units. Like smok said they did then it shouldn't be no problem

Sent from my SPH-L710T using Tapatalk

 

[Koolkiz]

Thank you for that information! Very much appreciated!

PS> I got an RBA for it... and will have to learn how to rebuild now.. lol

I just bought a single rba for the tank. I'm wondering what type of single builds would work. It does come with 3 0.85 coils with the unit. I am lazy and would rather buy prebuilt coils. However, I'm looking >0.85 coils such as 1.0 an 1.2 so I don't suck the liquid. I did rehome the smok x-cube 2 to another vapor-er. It was too much for me.

 

[Kristen_C]

I emailed them over the weekend, and they still said that they were 19 short and we're waiting on Smok to send them out to them for dispersing. The typical reply I've seen that other people have posted as well.

Still waiting...

 

[danjaman]

The stainless steel temperature control on the Xcube 2 is absolute crap, I've been trying for 2 days to get it working.
It's as useless as the TC on the M80, it just doesn't work.
I'm seriously disappointed, yet somehow not surprised.

Sent from my GT-N7105 using Tapatalk

 

[Lomka]

The stainless steel temperature control on the Xcube 2 is absolute crap, I've been trying for 2 days to get it working.
It's as useless as the TC on the M80, it just doesn't work.
I'm seriously disappointed, yet somehow not surprised.

Sent from my GT-N7105 using Tapatalk

You can use Ti mode for stainless steel, you just have to turn down the temperature coefficient to 0.00200.

 

[danjaman]

You can use Ti mode for stainless steel, you just have to turn down the temperature coefficient to 0.00200.

That's miles off the coefficient of stainless steel, it won't work right, surely?

I'll give it a try, but I don't have much faith in it working.

Does yours keep jumping out of temp mode and back into watt mode?

Sent from my GT-N7105 using Tapatalk

 

[danjaman]

Nope, it keeps jumping out of temp mode.

Sent from my GT-N7105 using Tapatalk

 

[f1vefour]

The stainless steel temperature control on the Xcube 2 is absolute crap, I've been trying for 2 days to get it working.
It's as useless as the TC on the M80, it just doesn't work.
I'm seriously disappointed, yet somehow not surprised.

Sent from my GT-N7105 using Tapatalk

What wire type?

 

[danjaman]

What wire type?

317L

Sent from my GT-N7105 using Tapatalk

 

[f1vefour]

317L

Sent from my GT-N7105 using Tapatalk

No device can do proper TC with 317L, the TCR value is too low.

430 or 410 will work a treat, 304 will work but not as well.

 

[Lomka]

Nope, it keeps jumping out of temp mode.

Sent from my GT-N7105 using Tapatalk

hopefully it'll be fixed in the next update.
I still haven't got mine

 

[danjaman]

No device can do proper TC with 317L, the TCR value is too low.

430 or 410 will work a treat, 304 will work but not as well.

That's news to me, I bought it as temp control wire, so I didn't even look into it.

Thanks

Sent from my GT-N7105 using Tapatalk

 

[danjaman]

hopefully it'll be fixed in the next update.
I still haven't got mine

Damn, I forgot.

Sorry dude.

Good things come to those that wait...

Sent from my GT-N7105 using Tapatalk

 

[f1vefour]

317L will never work correctly, no update can fix this. Anything that far below 0.001 is just too low.

TCR Values of SS:
317: 0.000875
316: 0.000915
304: 0.00105
430: 0.00138
410: 0.00155 (this value hasn't been verified yet)

You need 0.001 or above to properly regulate temperature, the higher TCR equates to more accuracy.