Smoktech Vivi Seperation issues Simplified

[crxess]

Planning on modding a smok Vivi tank?
Seen the damage done by people trying to get it apart?
Broken coil wires - Pulled center post - leaking tanks - Oh My!

None of these things need to happen. Whatever your Modding plans are for the Smok Vivi or if you just want it apart to clean everything properly, do this FIRST.

Holding the tank in one hand - Remove the top cap - Place your pinky finger of the other hand against the center screw of the coil post - Push the inner workings with the pinky(or any small enough finger to fit) while holding the tank body with the opposite hand. The inside should push right out as one unit. DON'T be tempted to grab and pull the bottom once it starts coming out, just push.

After looking for something to fit inside the tank and not hit the outer coil post for almost 20 minutes, i just gave it a push and it pops right out.

Hope this helps future Modders - happy Vaping

 

[dsy5]

I've got a tube that came from a very large e-power mega cartomizer that had since died. It is just barely smaller in diameter than the tank. It misses everything and I put it in the top of the tank, invert it on the table and push the tank downwards. After I clear the base, I remove the tube and use the 'tilted tank' trick to remove it the rest of the way.