Smoktech Vmax Owners - tips, tricks and quirks

Status
Not open for further replies.

fuzzione

Ultra Member
ECF Veteran
Apr 11, 2012
1,049
1,438
GTA Ontario
Thanks to both Paulie and Mark. Good leads. The Electronicstix pricing is excellent together with very reasonable international shipping rates. Will likely go that route.

So, for the vmax is the 2.9ohm in the XL 801 Fusion size (plus adapter) the route to go? I'm presently using the ST DCT's and assume they'll fit well. Was tempted to also grab a J-tank at Electronicstix but they have no stock on the ones I like.

Guess I'll have to dig out that 1/16" cobalt drill tip that I have...somewhere.

I really hope this will be worth the effort. I'm not disatisfied with my ST dual coils, flanged and predrilled which is convenient. I don't mind going through the drilling effort if there is a substantial improvement in vape quality but if it's only like a 10-15% improvement over the ST's I wouldn't consider it worth the effort. Any thoughts from anyone who has tried both the fusions and ST DC's in a tank?
 

fuzzione

Ultra Member
ECF Veteran
Apr 11, 2012
1,049
1,438
GTA Ontario
I am going on 2 weeks and 2 days tomorrow and that's NO LIE bro! :D

Incredibly, I have a 2.5ohm ST DC going for exactly 1 month and 1 day. Although I'm only using this one approx. 1/2 the time. With a 70/30 mix at 4.7v this one just keeps going and to this day vapes like a champ with no foul taste. I think I've gotten my $2 worth out of it :blush:
 

Freddie

Super Member
ECF Veteran
Verified Member
Mar 19, 2012
809
530
The NETWORK
Incredibly, I have a 2.5ohm ST DC going for exactly 1 month and 1 day. Although I'm only using this one approx. 1/2 the time. With a 70/30 mix at 4.7v this one just keeps going and to this day vapes like a champ with no foul taste. I think I've gotten my $2 worth out of it :blush:
The FUSION is the ONLY cartos I use now and I vape about 8ml a day 50%PG-50%VG FOUR HOLE PUNCH PATTERN! TWO HOLES at the TOP and TWO HOLES at the BOTTOM! Same ONE carto for 2 weeks! In NO WAY, shape or form, I am trying to push the FUSIONS on ANYONE! I am just trying to get the word out about the Boge 801 Fusions or the Ikenvape 801 Fusions! They are an OUTSTANDING carto! I like the Boge 510 cartos, but the Fusions HANDS DOWN have a WAY BETTER draw!
 

Freddie

Super Member
ECF Veteran
Verified Member
Mar 19, 2012
809
530
The NETWORK
Thanks to both Paulie and Mark. Good leads. The Electronicstix pricing is excellent together with very reasonable international shipping rates. Will likely go that route.

So, for the vmax is the 2.9ohm in the XL 801 Fusion size (plus adapter) the route to go? I'm presently using the ST DCT's and assume they'll fit well. Was tempted to also grab a J-tank at Electronicstix but they have no stock on the ones I like.

Guess I'll have to dig out that 1/16" cobalt drill tip that I have...somewhere.

I really hope this will be worth the effort. I'm not disatisfied with my ST dual coils, flanged and predrilled which is convenient. I don't mind going through the drilling effort if there is a substantial improvement in vape quality but if it's only like a 10-15% improvement over the ST's I wouldn't consider it worth the effort. Any thoughts from anyone who has tried both the fusions and ST DC's in a tank?
I know the 510 to 801 shorties are a lot CHEAPER at Carolina Vapes...$2.49! As for shipping, I will have to get back to you on that!
 

fuzzione

Ultra Member
ECF Veteran
Apr 11, 2012
1,049
1,438
GTA Ontario
The FUSION is the ONLY cartos I use now and I vape about 8ml a day 50%PG-50%VG FOUR HOLE PUNCH PATTERN! TWO HOLES at the TOP and TWO HOLES at the BOTTOM! Same ONE carto for 2 weeks! In NO WAY, shape or form, I am trying to push the FUSIONS on ANYONE! I am just trying to get the word out about the Boge 801 Fusions or the Ikenvape 801 Fusions! They are an OUTSTANDING carto! I like the Boge 510 cartos, but the Fusions HANDS DOWN have a WAY BETTER draw!

Woah. At 8ml's a day I'd say you have used yours far more extensively than I've used my ST. OK I'm sold even though you're not selling :)
 

fuzzione

Ultra Member
ECF Veteran
Apr 11, 2012
1,049
1,438
GTA Ontario
@ FUZZ...I'll recommend this, if you buy 1 or 2 five packs and you are dissatisfied with them, then I will take them off your hands and BUY YOU the Smoktech 2.5 ohm DC cartos and send them to you! DEAL?

Naaa. I was sold on these long ago when initially recommended by both you and VAPNJ. I'm still trying a whole range of stuff to find that sweet spot that I can stick with and I'll be adding these to the collection for sure.

What tank are you using them with Freddie? And again, on the vmax do you prefer the 2.9ohm?
 

Freddie

Super Member
ECF Veteran
Verified Member
Mar 19, 2012
809
530
The NETWORK
Naaa. I was sold on these long ago when initially recommended by both you and VAPNJ. I'm still trying a whole range of stuff to find that sweet spot that I can stick with and I'll be adding these to the collection for sure.

What tank are you using them with Freddie? And again, on the vmax do you prefer the 2.9ohm?
I used a PHINIAC XL tank with XL 2.9 ohm Fusion carto! The reason why I said USED is because my APARTMENT got broken into and ALL my VAPE STUFF got STOLEN, but I'm slowly climbing back to yhe TOP again! :D
 

vpsi333

Senior Member
ECF Veteran
Verified Member
Feb 14, 2012
251
170
near Birmingham Al
My black Vmax occasionally resets to 5V. I figured it was due to the batteries being low, but it just did it on a fresh set.


I’m stuck on the ST duel core 1.5 ohm through my tank. Same carto over a month. 100% VG gorilla juice at 4.4 to 4.7 volts.
I can't get the knack of the Atty's. Great vape but I always end up getting a dry hit.
 

79Silo

Super Member
ECF Veteran
Verified Member
My friend just bought it today.. unlucky for him he drop it while taking a drag.. the front end open and the wire's been cut off from the electronic.. help him to patch up the wire's and it work.. now im worry about my vmax if it drop.. need extra careful while handling it.. just to share
 

Lonnie Lepp

Senior Member
ECF Veteran
Verified Member
Mar 30, 2012
168
52
70
Texas, USA, Earth
I have been using a VMax since mid April. eGo LR carts and LR eGo Tanks do not work well even at 3.0 volt setting. Much to hot vapor production and a quick burn out of the heater in the atty.

I love the eGo C Type B setups for cool, smooth vapor production with very little bother. very easy to clean and refill.

My next order or so I will be trying the standard Resistance atty inserts. Hope those will allow me to use the VMax with the eGo Tank systems.

With the VMax I have been using a generic 4 ml tank with a 2.8 ohm single hole flanged single coil cart. Works well
 
Status
Not open for further replies.

Users who are viewing this thread