So I finally tried NHaler High Voltage liquid

Status
Not open for further replies.

DaMulta

Ultra Member
ECF Veteran
Jun 18, 2009
2,300
11
45
T-Town Oklahoma
Lets just say I love vapping at high voltage. I vape cartomizers at 6-7v all the time, and I also vape on the 510/901 at 6-7v 99% of the time.

Most people know that I vape high Mg 24Mg-48Mg. 24/36Mg being my main vape of choice.

I think I like my liquid to have a strong kick behind them, and higher nicotine seems to do this. It also REALLY does it at high voltage, and I bet with some people it's just way to much mixing high nicotine with high voltage.

So what I have found with High Voltage liquid is that the vape is smoother. I found myself dripping just as much as I do with my watermelon 40Mg mix. As I do with this 12Mg Chocolate Macadamia.

I think this liquid is great for people that want a lot of vapor without the harshness that comes with higher Mg mixes.

I did however find myself taking more drags. I think this is because the nicotine content is lower than what I'm used too.

I like to take a drag or two every few mins. Sometimes 5-10mins in between drags. With High-Voltage I have been tending to take 4-5 drags then wait a few mins like normal.



Like normal the flavor Chocolate Macadamia is right on key, and I really like it a lot. I will be seeing what it is like when I bump up the Nicotine in it. I hope that the flavor does not get knocked down when I bump it up a bit.


Thank you Drew for sending it out!
 

mojocracker

Full Member
ECF Veteran
Oct 26, 2009
60
6
56
Scottsdale, AZ
I just placed my first order of Nhaler juice tonight. I've been reading great things about the HV juice but I was worried about the lower nic content so I got 2 bottles of the 24mg and 1 HV (RY4). Please let me know how it goes when you bump it up. (what mg and how much etc...) Is there a reason why the HV only comes in 12mg or is there just no demand for it in the higher strength?

Thanks
 

laurel099

Ultra Member
ECF Veteran
Verified Member
I don't up mine but you can buy the 48 or 60mg unflavored and bump it up that way. If you use the 60mg you lose the least amount of flavor since you add less juice :D

I actually dilute mine down but would use the same process if going up. I mix in bottles generally 15ml size but if trying an experiment I'll use a smaller sample size bottle.

Good luck!!
 

mcl5000

Super Member
ECF Veteran
Jul 15, 2009
762
16
39
Allentown, PA
when you guys "mix"... do you mix in another bottle or do you drop a couple of unflavored drops on your atty and a couple of HV drops with it?

If I'm dripping, I just go with the 12mg. If I'm in a situation where it's feasible to drip, I actually like that it's 12mg because I can chain vape without dying. :)

Now when I'm on my way to work (hour drive) or just out and about, I use carts. I use the spring/plug "drip" mod. I put like 5 drops of my unflavored in the cart, then fill it with the HV juice.

Basically, I have no need to mix them in another bottle.
 

cos

Ultra Member
ECF Veteran
Verified Member
Oct 22, 2009
2,215
497
St Petersburg Florida
Hello to all. i have no idea how much unflavored nic juice to add. so if i have 12mg and i want say 30 or so nic how many drops would i use about. lets say using the 60mg unflavored liquid that Drew carries.
and if im using the 24mg how many drops from the 60mg nic juice would i add to that. i tried to use the calculator to do nic up but it doesnt do it right or i am doing something wrong.
And you guys say its better to use the 60mg nic better than the 48 mg nic cause you dont have to add more drops to it? if i used just 48mg nic juice that would take the flavor away?
Thanks for any info as i am really new to this.
 

Kimmberlee

Senior Member
ECF Veteran
Dec 14, 2008
171
5
MI
If I'm dripping, I just go with the 12mg. If I'm in a situation where it's feasible to drip, I actually like that it's 12mg because I can chain vape without dying. :)

Now when I'm on my way to work (hour drive) or just out and about, I use carts. I use the spring/plug "drip" mod. I put like 5 drops of my unflavored in the cart, then fill it with the HV juice.

Basically, I have no need to mix them in another bottle.

Thanx MCL... I am just wandering my way into the whole "cart" life.... I have liked dripping from the beginning (after I ordered a lot of filled poly carts :mad:) I am hoping that this will be my solution when I travel.

Thanx .... I really do appreciate the feedback!!!!! :wub:
 

lotus14

Ultra Member
ECF Veteran
May 3, 2009
1,460
1
Columbia SC
Hello to all. i have no idea how much unflavored nic juice to add. so if i have 12mg and i want say 30 or so nic how many drops would i use about. lets say using the 60mg unflavored liquid that Drew carries.
and if im using the 24mg how many drops from the 60mg nic juice would i add to that. i tried to use the calculator to do nic up but it doesnt do it right or i am doing something wrong.
And you guys say its better to use the 60mg nic better than the 48 mg nic cause you dont have to add more drops to it? if i used just 48mg nic juice that would take the flavor away?
Thanks for any info as i am really new to this.

20mls of 12mg plus 10mls of 60mg = 30mls of 28mg. So basically it's 2 parts 12mg HV to 1 part 60mg unflavored.

25mls of 24mg plus 5mls of 60mg = 30mls of 30mg.

Yes, if you use the 48mg unflavored you'll need more of it and lose more flavor.
 

arkangel

Senior Member
ECF Veteran
Sep 30, 2009
233
0
Chicago Suburbs
Just got my first order of sampler HV juice: Choc Macadamia, Butterscotch and PB Cup. I rinsed out 3 cartomizers when I placed the order and let them dry while waiting for delivery (d**n Thanksgiving--no mail delivery!) Using them on my 510 Little Chuck (3.7v) with a carto adapter.

Wow! is pretty much all I can say! The vapor's incredible and even at 12mg I was coughing when I took my usual inhale--it had some hit! Had to tone down my drags to get the same mellow pull I like.

I don't know how Drew does it--is there VG in there? The vapor sure makes it seem like it. But the VG I've been using before gave great vapor, but less of a throat hit. The HV hits that sweet spot of vapor AND throat hit, even at 3.7v.

Flavor-wise:
PB Cup: can't tell what this tastes like, but it's not the Reese's I'm used to eating--got it as a lark, so probably'll pass on this one

Chocolate Macadamia Nut: like this one, with a rich complex flavor

Butterscotch: love this one. I was hoping to find a similar flavor to the Ecopure English Toffee from cignot, but they only sell 0, 18, and 25mg: I'd use the 0 for long night sessions, but the others are out of my mg range. The HV fills that gap perfectly.

I know tastes are personal, but can anyone comment on the difference between the HV 555 and Drewbacco flavors? And what about Drewbacco-1 and -2?
 

cos

Ultra Member
ECF Veteran
Verified Member
Oct 22, 2009
2,215
497
St Petersburg Florida
Lotus thanks for the formula. im still confused. So lets say i have a small bottle of Drews liquid 6 ml @ 24 mg. I want to bump it up to say 32. I will use the 60 mg of unflavored so i dont lose any flavor. How would this be figured out and how many mill will i have when i am done bumping it up with unflav 60 mg? Wow i just thought if i have 24mg and want to bump it up to about 32 i woulde just add a few drops of 60mg unflavored to it. If you answer my question using the 6 ml of 24mg and bumping it up will really make me understand better.
I dont want to add more nic than what i am suppossed to. Thanks again

Cos
 
Lotus thanks for the formula. im still confused. So lets say i have a small bottle of Drews liquid 6 ml @ 24 mg. I want to bump it up to say 32. I will use the 60 mg of unflavored so i dont lose any flavor. How would this be figured out and how many mill will i have when i am done bumping it up with unflav 60 mg? Wow i just thought if i have 24mg and want to bump it up to about 32 i woulde just add a few drops of 60mg unflavored to it. If you answer my question using the 6 ml of 24mg and bumping it up will really make me understand better.
I dont want to add more nic than what i am suppossed to. Thanks again

Cos

Cos, the mg rating refers to how many milligrams of nicotine are in each milliliter. So here's the math:

6ml x 24mg/ml = 144mg/6ml
144mg + 60N = 32mg/ml*(6+Nml)
N = 1.71428... (1 5/7)

In other words, if you add approximately 1.7 milliliters of 60mg/ml liquid to 6ml of 24mg/ml you would have a total of 7.7 milliliters and 144+(1.7*60=102)=246 milligrams for 31.95mg/ml.

Therefore since there are 20 drops per milliliter, you should add approximately 34 drops of 60mg/ml liquid to 6ml of 24mg to get 32mg liquid. Does that help or make it worse? :p
 
Status
Not open for further replies.

Users who are viewing this thread