So, I want a Cyclone.

[tmel]

I know the normal Cyclone will work on an unmilled Grand.

Will the AFC/Air Flow control thing only work on a milled Grand?

Also...wheres the cheapest place in the US to snag one? Outside of the classies...

 

[narcolepticltd]

AFC will only work with a milled reo. OKCVapes has the bottom fed version, but don't see the AFC there.

 

[tmel]

Darn, oh well.

I'll just drill the hole

Cheapest I have found so far is here: Cyclone Rebuildable Atomizer by Vicious Ant Precision Engineering and Research - Cyclone Rebuildable Atomizer & Accessories 59.95

 

[Izan]

Darn, oh well.

I'll just drill the hole

Cheapest I have found so far is here: Cyclone Rebuildable Atomizer by Vicious Ant Precision Engineering and Research - Cyclone Rebuildable Atomizer & Accessories 59.95

They used to have the Divo, they still do, but they use'ta too.

 

[tmel]

Kind of digging the look of that.

I'm torn between Divo, Cyclone and ERA/Hornet options now lol.

Divo...like the size and the base, it looks like it would drain and squonk great.

Cyclone, I know it'll look A LOT better then the Divo on my grand due to it being smaller, and I like the design of the posts/base too.

ERA, I like the single o-ring on the base for the cap and that both posts are the same height and I dont like the hornet much.

 

[Filthy-Beast]

You can get the Cyclone with regular top cap in either BF or TF, you can only get the Cyclone with AFC cap in TF. The regular cap fits the Reo the AFC cap only works on an LP Reo.

 

[tmel]

Thanks Filthy!

 

[r2d2]

You can get the Cyclone with regular top cap in either BF or TF, you can only get the Cyclone with AFC cap in TF. The regular cap fits the Reo the AFC cap only works on an LP Reo.

So if I wanted a Cyclone with AFC I'd buy the "regular" BF version and then purchase the AFC top cap separately? And this will work on an LP Grand?

 

[Filthy-Beast]

Yes, that is what I have on my LP right now.

The only place I can find with just the AFC cap in stock is in the UK. By the time you factor in exchange rate and shipping it's less than $10 more to just get a Cyclone BF with a regular top and a Cyclone TF with the AFC top. Then you swap tops and sell the Cyclone TF with regular top in the classies and be ahead.

 

[super_X_drifter]

Cyclones are great RBAs

 

[tmel]

Since you have unmilled Grands, you just went with 3 Cylones for the AFC?

Smart!

 

[marsos52]

my favorite atty for the Reos is the Cyclone. both my Grands are sporting Cyclones and I suggest the Fusion drip tip that is made for the Cyclone too. I have another Reos due to me in a day or two and I already have a Cyclone waiting in the box for it.

as far as the AFC option I passed. Mainly because I have used several atty's with that feature and two happen, first I just use one size hole and second I found it be a hassle with a collar always moving to a different opening or having to lock in the one size I want.

So much easier to just drill out the hole to the way you want it.

 

[custom-classic]

I got the TF afc combo and drilled it out myself. I recently picked up a standard cap for it just to check it out. Long story short, I prefer a single coil with the standard cap over duals with the afc. I like the idea of adjustable air flow, I just don't care for the lack of flavor I'm getting with the increased chamber size. YMMV...

 

[super_X_drifter]

Since you have unmilled Grands, you just went with 3 Cylones for the AFC?

Smart!

Yeah, I don't need no AFC

Those drip tips are from RTD Vapor short Delrin. That's the only color I've seen.

 

[sbmqcy]

Never used a cyclone, so take that into consideration, but the divo is pretty great. Works on all REOs, nice small chamber (again, can't compare to cyclone or afc cyclone). It looks smaller than the cyclone, but haven't seen them side by side. I think there's someone on here who has both, maybe they'll post a comparo pic?

You could do as I do--divo now, milled reo with cyclone afc later. Good luck!


Sent from my mobile

 

[tmel]

So, I can do the Divo on my unmilled Grand? Isn't it 22mm? I thought 22mm rba's needed a milled grand.

 

[super_X_drifter]

So, I can do the Divo on my unmilled Grand? Isn't it 22mm? I thought 22mm rba's needed a milled grand.

No the divos are smaller - like a hornet. It even looks like a hornet. My hornets fit on mini 2.0s. They'd definitely fit a grand.

I found that the hornets heated up whereas the cyclones do not. RBAs that heat up vape inconsistently when ya chain vape

 

[custom-classic]

So, I can do the Divo on my unmilled Grand? Isn't it 22mm? I thought 22mm RBA's needed a milled grand.

From another thread:

Yup, it fits.

Sent from my mobile

And there's this:

here's both side by side, cyclone is on an 18mm base, divo is on a 14mm base

 

[Filthy-Beast]

yeah, Indyvape's site is wrong its not 22mm.

 

[sbmqcy]

Thanks Custom! I wonder if turbocad has a standard cyclone cap to see what the size comparison is like. If I don't hold out for the lp grand/cyclone afc, I might go for another mini 2.1 with the divo. The more I use it, the more I'm digging the flavor.

As far as chain vaping goes, I've been doing it with the divo without weird flavor changes. It's loaded up with gorilla juice right now. One blind squonk gives me about 3-5 good vapes. I've been tending to squonk once on my drive home from work--I finish the squonk by the time I get home (about 5-7 mins). Sometimes I squeak another squonk in on the way. It definitely heats up, more than the rm2, but not an inordinate amount.


Sent from my mobile