So I'm thinking a reomizer 2.0... and a RSST

[mwdenko]

Happy Saturday...
So.... I saw a thread on where to get kanthal wire. http://www.e-cigarette-forum.com/fo...7561-looking-quality-kanthal-n-wick-bulk.html the second post led me to this site and I ordered 100 ft of 32GA wire. It's sitting here on my desk. $8.48 Now what? LOL
Does anyone here like a particular seller or have a recommendation as to where to get 2mm wick in bulk? Pro-con.. thanks in advance!

 

[mrcoolbp]

Hey man mwdenko, with the RSST, you may want to try SS mesh, as much of a pain as it is to get started on (small learning curve cutting, rolling oxidizing), generally these genesis attys are made for them. You can still try other wicks though.

 

[t8kiteasy]

Happy Saturday...
So.... I saw a thread on where to get kanthal wire. http://www.e-cigarette-forum.com/fo...7561-looking-quality-kanthal-n-wick-bulk.html the second post led me to this site and I ordered 100 ft of 32GA wire. It's sitting here on my desk. $8.48 Now what? LOL
Does anyone here like a particular seller or have a recommendation as to where to get 2mm wick in bulk? Pro-con.. thanks in advance!

You can purchase your silica from ebay that is where i get my 3mm and 2.5mm silica from. 2mm 2000 Micron or 12 AWG Silica Wick High Temperature Glass Fibre 50 Metre | eBay . This is for 165 ft. of 2mm silica.

 

[tnt56]

I go to eBay for all my wire and mesh. US made and great quality. All kanthal A1 and pure SS mesh. Cheap also. IMHO.

 

[mwdenko]

Hey man mwdenko, with the RSST, you may want to try SS mesh, as much of a pain as it is to get started on (small learning curve cutting, rolling oxidizing), generally these genesis attys are made for them. You can still try other wicks though.

I was planning on mesh for the RSST. Now I just have to find one.

 

[super_X_drifter]

The RM2 (REOmizer 2.0) is a fantastic atomizer, perhaps the best, simplest bottomfed atty you can buy.

 

[d3mon]

I was planning on mesh for the RSST. Now I just have to find one.

hoosier vapes has the RSST on sale for 26.99

 

[STLJohnny]

Sorry to hijack I just want to ask a quick rsst question that doesn't deserve a thread. It may also assist the OP, I hope.
Im on my 2nd try everything looks good 1.6 ohms that dont bounce, coils light up evenly but I was getting very low vapor both tries then I moved the air hole in the cap to the wick side and all of a sudden its like I knew what I was doing. Is that where the airhole is supposed to go or was this a coincidence?

Thanks

 

[super_X_drifter]

Sorry to hijack I just want to ask a quick rsst question that doesn't deserve a thread. It may also assist the OP, I hope.
Im on my 2nd try everything looks good 1.6 ohms that dont bounce, coils light up evenly but I was getting very low vapor both tries then I moved the air hole in the cap to the wick side and all of a sudden its like I knew what I was doing. Is that where the airhole is supposed to go or was this a coincidence?

Thanks

The airhole wants to be right in front of the coil on any RBA boss.

 

[STLJohnny]

The airhole wants to be right in front of the coil on any RBA boss.

Ok you threw a "boss" at me which means it was a stupid question. I get the vapor is produced at the coil/wick and if the airhole was on the other side it would have to travel around the tube but the difference in vapor production was night and day so I asked.

Thanks!

 

[d3mon]

The airhole wants to be right in front of the coil on any RBA boss.

agreed. closer = better.

 

[d3mon]

Ok you threw a "boss" at me which means it was a stupid question.

nope. i would have asked when i started but i happen to read someone saying the same thing.

 

[grainey1968]

nope. i would have asked when i started but i happen to read someone saying the same thing.

Everyone who starts into RBA's will have questions. None of them are stupid. But, it you don't ask, you will have to figure it out yourself (like the more experienced at RBA's). I only wish I had of known about this site a few years ago and ask some vets and saved myself a lot of headache!!
We are all willing to help!

d3mon thanks
STLJohnny welcome to our world

 

[super_X_drifter]

Ok you threw a "boss" at me which means it was a stupid question.

Thanks!

Not a stupid question bro (hope that doesn't have a secret meaning ) nor would I insult you for asking even if it was. I am not a man of hidden meaning.

My wife always gets on me for always jovially calling people something (boss, hoss, bud, big daddy, bro, just to name a few). Perhaps she's on to something?

If I wanted to insult someone, I got some words that are much better than boss

The only stupid question is the one you don't ask boss. To me boss is a friendly way of referring to somebody

 

[d3mon]

(boss, hoss, bud, big daddy, bro,).

...add skippy, skillet, dude, el jefe, man, pard (really lol), homie, and chili for me lol

 

[mwdenko]

lol

Sir and boss for me ...

 

[mwdenko]

Got my first coil done! 1.9 and doin fine.

WHY WHY WHY did this have to be soooo easy? Now I'm trolling the classifieds looking for more trouble to get into...

 

[d3mon]

WHY WHY WHY did this have to be soooo easy?

because RSST.