- Status
well if you have the coil good, not much that can happen to it by unscrewing the top.....and I actually like to see it with every refill....like seeing underneath a skirt ;-)
Seeing up a skirt is one thing, but with that peek gone her wick is only held in place by the coil, and you have to gently work it back into the hole....
SS mesh in mine. I thought it was for the o ring to seat into. Mine goes on like a well made socket tool
sent from my HTC genisis using Tapatalk
sent from my HTC genisis using Tapatalk
so in understandable (for me) English :you enlarged it on both sides to 2mm?
Ahh I countersunk the peek as well so the mesh locates betterno faffing
no i enlarged the hole to 2 mm then on the mesh side I gently used a bigger drill bit to make a countersink, but did not go all the way through, hope this helps emonty.
when you put flat screws in wood you make the top of it so the screw doesnt stick up
when you put flat screws in wood you make the top of it so the screw doesnt stick up
ah ok clear, thanks!
not messing with it though until you have given it a stamp of eye approval
not messing with it though until you have given it a stamp of eye approval
no i enlarged the hole to 2 mm then on the mesh side I gently used a bigger drill bit to make a countersink, but did not go all the way through, hope this helps emonty.
when you put flat screws in wood you make the top of it so the screw doesnt stick up
Lungs are being assaulted, taste is good and van says 23mm mesh will be good, and vapor is great lol, its hitting
I hate to hear that....what kind of problems are you having with it?
- Status
Similar threads
