So? Some information about closing the G-tread?

[Brazilleon]

I have to say it again: German engineering is one of the best in the world. Still on my first coil after using it on a daily basis for two weeks, running at 2.8 ohm, the Genesis is a beast!! Should be getting XC-4 next week and will make a mesh and wick version...Until now totally satisfied. Great Great flavor, massive thick clouds of warm Vapor!!

What juice do you use? I think my biggest issue is the juices I use, sweetened TV juices, they seem to clog up most attys I try and likewise my SS mesh, I never get more than 4 days off a coil before I start fiddling again. But I love their flavor too much to stop and I have a load of it. 8)

 

[emonty]

50vg/50pg, 30vg/pg70, 20vg/80pg, all work fine. I only use DIY, no additional sweeteners and I use double concentrates for flavoring as much as possible. The coil I have made has 9!! wraps, strong as hell this way. I never took the connector off so I don't know what it looks like but as it tastes great, why should I...if it works....

What juice do you use? I think my biggest issue is the juices I use, sweetened TV juices, they seem to clog up most attys I try and likewise my SS mesh, I never get more than 4 days off a coil before I start fiddling again. But I love their flavor too much to stop and I have a load of it. 8)

 

[UA72Riddle]

And since Raidy isn't here to do it himself....a direct quote from him.....

"please...it is the GenIsis."

 

[asdaq]

And, while you mention it, this one is Made In Poland. *



* I know, I know, the genisis part is all thanks to raidy... that never stops.

 

[Brazilleon]

Back to the genisis atty in the g-tank tonight with 6cm wrapped 8 times and no trimming. This time on a shorter mesh, 20mm.
Getting 2.2ohms on the Darwin and it seems to be running well.

 

[eyebrook]

I use 25mm high by 21mm wide #400 mesh at 2+ ohms and it works for me

 

[UA72Riddle]

Back to the genisis atty in the g-Tank tonight with 6cm wrapped 8 times and no trimming. This time on a shorter mesh, 20mm.
Getting 2.2ohms on the Darwin and it seems to be running well.

6cm? That's pretty thick....

My wick is 3.5cm long x 1.5cm wide with the corner trimmed off. I trimmed too much of making top portion too thin, but will correct that next time I NEED to make a new wick since this one is working fine, other than the fact that it wicks too fast on thin juice.

 

[SmaBob]

While looking at the forum I saw an idea. I want the ss adapter for my g-tank, but they are not in stock. As a temp fix I wrapped dental floss around a drip tip (about 30 times) and now can use it on the g-tank.
Bob

ONLY FOR AWHILE

 

[UA72Riddle]

While looking at the forum I saw an idea. I want the ss adapter for my g-tank, but they are not in stock. As a temp fix I wrapped dental floss around a drip tip (about 30 times) and now can use it on the g-tank.
Bob

ONLY FOR AWHILE

If you cut a 701 right at the flat spot....a 510 DT will fit right in there!

 

[SmaBob]

Thanks
Bob

 

[asdaq]

G-tank silo edition:

 

[eyebrook]

Got to say it asdaq my friend, it looks like the fuel tank for the space shuttle

 

[lorderos33]

Got to say it asdaq my friend, it looks like the fuel tank for the space shuttle

Uh-oh...that being the case, is explosion imminent?

Sent from my ADR6300 using Tapatalk

 

[asdaq]

With a little more work I can be vaping R2D2's head!

 

[eyebrook]

With a little more work I can be vaping R2D2's head!

Gee wizz how did I miss that

 

[Brazilleon]

6cm? That's pretty thick....

My wick is 3.5cm long x 1.5cm wide with the corner trimmed off. I trimmed too much of making top portion too thin, but will correct that next time I NEED to make a new wick since this one is working fine, other than the fact that it wicks too fast on thin juice.

Ah my bad, I meant 6cm length of the kanthal wrapped 8 times, not the mesh.

 

[mj64]

If you cut a 701 right at the flat spot....a 510 DT will fit right in there!

I had one made, then cracked it trying to get the drip tip to fit better. Tried another, really mangled it....

 

[harmonic]

asdaq thats really cool. ive been wanting make a mod something kinda like what you got that on... tube with the outside retaining rods and mec button maybe 18650 size

 

[asdaq]

Thanks harmonic, you should give it a try, there really isn't anything that complicated about it.

 

[UA72Riddle]

Ah my bad, I meant 6cm length of the kanthal wrapped 8 times, not the mesh.

Haha...that sounds better!