So, WHAT are you guys looking to buy next?

[ScandaLeX]

Atmistique gold scuba tank/diver/Enezlis.
OliveR Dibi mod.

Sent from a BIG phone.....Galaxy Note 3

I'm happy! vape Mail!!!!!

My OliveR Dibi is almost ready to ship.

 

[ej1024]

Copper 26650 Hades, waiting BIG BOY MODS

Sent from my LUMIA 1520 Tapatalk

 

[CKCalmer]

eVic-S!

And, although they don't have an inferred meaning in this particular context, these remaining words are written in order to satisfy the ten character minimum for submitting a proper and fully-qualified post in the E-Cigarette Forums.

Have a great day!

OK, I wonder if my emoticon would count as two characters in this regard. If so, then next time I could simply add a few such smilies to my posted evocation that the eVic-S will be my next vaping purchase. But alas, I'll probably never do it again, at least not before actually acquiring the aforementioned eVic-S. So never mind.

 

[treehead]

I just read that the eVic Supreme won't become available until about six weeks from now. Yay! That'll give me time to pull out more of my hair.

Knowing how impatient I am, I'll probably change the plan back to getting a Sigelei Zmax V5 as my next vaping purchase, and my first mod. If it's half as good as what I've read about Sigs, I won't regret buying one.


Let me guess... Bad Mother Fudging Personal Vaporizer, right?

Grab a cheap mechanical mod while you wait from ebay , it'll be at your doorstep in a week (sooner if you pay the shipping), and if you build your coil around your battery you can do 30 watts or more, that might hold you over, although I know how it is biting your nails waiting for that precious vape mail. That evic supreme is pretty sweet, first I've heard about it, how low can it go in ohms?

 

[treehead]

Copper 26650 Hades, waiting BIG BOY MODS

Sent from my LUMIA 1520 Tapatalk

That bad boy is awesome, I read that the volt drop is ALOT better than the authentic lol, and the clone even has a better button. Win freaking win. They even have a clone of the big nasty now! I'm waiting for the LE red copper 22650 stingray that'll probably come out soon, if not the stainless is pretty sweet too.

 

[DEAc23]

I will be ordering some or all of the following before this weekend:

1. Innokin iTaste SVD (and possibly 2 iClear30 tanks)
2. Kanger Protank 2 (two or three of them)
3. Batteries (not quite sure yet, but probably 2 18490's and 2 18650's)
4. Nitecore Intellicharger i4 v2
5. Kanthal 30 & 32 gauge + wick material (to try rebuilding the PT2 coils)
6. 5 pack of each of the following - PT2 coils, Triton coils (Kanger T2's), and possibly iClear30's
7. 30mL of Halo Turkish, and probably a few 5-10mL bottles from other companies to test them out

I CAN'T WAIT

I received everything that's not crossed out above

Here's a couple of the pics I've taken since I received everything (although I forgot to ad the 30/32g Kanthal and Ekowool):




And here's the SVD+Protank 2 all set-up, and filled with some of Halo's Turkish Tobacco


So far I love it all

 

[treehead]

Based on the multitude of comments by ECFers on how much they love their mechanicals and their RDAs, and how, if they were going to be stranded on a desert island and could only take one APV with them, that it'd be their favorite mechanical, their favorite RDA head, a 5000-mile long extension cord and enough Kanthal, cotton and juice to last a lifetime, that I feel quite certain that when I do finally buy my first mechanical and dip my toes into dripping atomizers**, that I'll consider all the money I've spent in the meantime on vaping hardware to have been wasted.

So the smart mind would say, "If you're so sure of this, then you should start buying mechs and RDA gear immediately, even before you buy your next set of disposable coils for your T2-clone."

But my mind, not always being so smart, is saying, "Whoa there, hoss. I don't care what that smarty-pants mind is telling you. That's a whole new realm of OhMyGollyWhatDoesItAllMean?!? You should stick to what you know for now, and then spend your days learning more and more about mechanical droplets, or whatever they call it, until you feel more comfortable stepping into the pool at your own pace."

Having been accused so often of being a "half-wit", maybe that means I should choose a route in between each of those strategies. I'll get my first VV/VW mod and a couple of RBA tanks for it, then I'll try my hand at coil-making. Once I have that down fairly well, I'll drop coin for my first mechanical, and then venture into the land of dripping.

Whichever route I take, I have to say that many of the mechanicals I've seen are drop-dead gorgeous. Heck, I'd buy them just for their art appeal, even if they had no practical use.


** - Only a figure of speech - I'd never recommend to anyone putting their toes into an open coil assembly and pressing the button.

Yeah I hear ya calmer, and I respect what you mean. There are alot of users that try to shove what they think is perfect down everyones throats, and that's just rude. I did it exactly how you did, I started off with carto's, and eventually got an aspire nautilus because they're just convenient and you don't need to do any long research on them. Plus I straight up thought they were cool, I vividly remember still thinking that bottom coil tanks were more sophisticated than the simple caveman dripper (says the die-hard dripper ) because they are designed to drip for you, they're their own little concealed mechanism.

~Then when I finally knew I liked vaping for sure, and when it later became a hobby, that's when I ran out of information on my tanks, and started to branch out. I got a vamo, and a trident dripper (after I rebuilt the coil in my nautilus first and saw it wasn't a big deal that is, and that it improved it slightly, even though it was a terrible coil lol). As I kept researching and asking for help etc. I slowly became frustrated that my vamo wouldn't let me "cloud chase" or sub-ohm, or anything else I saw on youtube that I wanted to try. Needless to say I dived right in to the mechanical world, and bought a limited edition red copper authentic JD Mods Stingray (I made a good choice because it's still the best mechanical I own ) did quite a few hours of studying so I wasn't afraid of blowing my face off (btw it's not as dangerous as some of the safety police on the forums claim it is, you pretty much can't blow up a sony vtc4), and once I knew how everything worked in the vape world I simply preferred drippers and mechanicals.

~But that's only because of the type of person I am. I know many on ECF that are smarter, more experienced, and know what they're doing and they prefer carto's, and 910 atomizers. It's different strokes for different folks, just because you don't drip with a pure silver mechanical mod doesn't mean your a noob, or your ignorant in all that is vaping lol, and some honestly believe that. I think we should all just join together happily and hate ciga-likes.

I'm just kidding, I started on blu-cigs, they aren't bad.

 

[treehead]

I didn't realize this was my post on the front page lol. Here's my update, and it's different from my usual vape mails.
-I bought the Tatroe T1 Rebuildable Tank Dripping atomizer a month ago on pre-order , I don't want to check the tracking but should be here soon!
-Tree of Life Mechanical Mod (I need this one now, I'm biting my nails for this!)
-I just yesterday got the Castle V2 RDA clone in, and it's the least cloney RDA I've had. It kicks ....! Looks good too.
-1 big OZ. bottle of Virgin Vapor Celestial Honeydew 12mg (best flavor EVER...to me )

But I've got alot of materials coming in because I'm building my own mechanical (It's gonna be a pure silver circuit, so 115% conductivity...in theory, likely no.)
-2 feet of 14ga 99.999% pure silver wire for the negative connection.
-A solid silver 510 connection (I'll be putting this in a Sterling silver top cap that I made myself , but it doesn't have to be ssilver because it's insulated)
-Solid silver Chi-you replacement contacts (my favorite style of positive adjustment contacts)
-A 1 foot slab of black delrin that I'll insulate the contacts with (so it doesn't fire on it's own)
-99.999% silver solder for joining the connections
-And to house it all I found an awesome looking flashlight believe it or not, designed to dissapate heat, and looks badarse, it's got a great button too.
Zoom CREE Q5 XPE 3 Model LED Tactical Police Rechargeable Flashlight 18650 Torch | eBay

 

[CKCalmer]

That evic supreme is pretty sweet, first I've heard about it, how low can it go in ohms?

0.5, although I don't foresee myself going under 2 or so. After having tried several coil resistances and all the ranges on my Triton VV, I've discovered that I like a fairly cool vape. So >2Ω and <4v is going to be my realm.

and eventually got an aspire nautilus because they're just convenient and you don't need to do any long research on them. Plus I straight up thought they were cool

I love the Nautilus, too. It's still at the top of my toppers list.

 

[Vicshalls]

sad but true i just ordered a panzer clone today and already want the vanilla clone. smh my wife is going to kill me.

 

[chrisj3982]

Probation 2.5 w/ blue led, neme, black chrome vamp v5, hades, Helios, omega, kraken, Russian 91%, more batteries, locking case. DIY stuff


Sent from my iPhone using Tapatalk

 

[chrisj3982]

Stupid autocorrect *provari


Sent from my iPhone using Tapatalk

 

[v1k1ng1001]

I'm sitting out the DNA30 tech until it matures. Also waiting to see if a new Provari model emerges.

In the meantime I have my eye on a REO. Yeah, I'm gunna be one of those guys.

 

[Loopy1224]

I am trying to decide which dripper to buy. Gee there are so many to choose from.


Sent from my iPhone using Tapatalk

 

[nikkysikk]

I'm looking at the new eVic. There's something about it that I just want.

Sent from my DROID RAZR using Tapatalk

 

[pinkythereddog]

I am trying to decide which dripper to buy. Gee there are so many to choose from.


Sent from my iPhone using Tapatalk

I'm in the same boat right now. Trying to find one that has an easy to build deck with adjustable airflow for both dual coils and single coils. Right now the Omega seems to be my only option but that deck looks annoying to build on.

 

[Jahjah1121]

I have a spinner and a protank, and at this point i don't need anything fancier. I think I'm gonna pick up a backup. I plan on getting an ego v3 mega and another protank 2. I have used the v3 mega with my protank and was digging the variable wattage.


Sent from my iPhone using Tapatalk

 

[KerryK]

Ah, my budget mind is telling me now that the Innokin SVD is so cheap that it's in my very near future....

 

[KerryK]

....and 2 more Aero Tanks...

 

[Clark F]

RBA's. I've been vaping for almost three weeks now, time to start learning to build coils.