And to you also, and to all the rest of you gals here. Boy, that looks awfully good.
- Status
Some kind of low battery notification? I ran my Ipro batteries down to 2.5v by accident yesterday. which happens more than i care to admit. I just forget!
I like to charge my batt's at 3.5 volts, but on the buzz and infi, the only way to check battery state is to pull the batteries and put em on a meter.
I like to charge my batt's at 3.5 volts, but on the buzz and infi, the only way to check battery state is to pull the batteries and put em on a meter.
There is no issue running your batts until your BP or IPro quits. If you read up on battery safety, these cells (with the pcb protection both on the cell, and in the device) will not discharge to a dangerous state. The battery over discharge issues happen when you have an unregulated device and/or an unprotected battery.
It's good to be concerned about these things, asking questions is how we learn
It's good to be concerned about these things, asking questions is how we learn
The new design has a low batt indication FYI !
2. Also over current protection
3. under voltage ( helps the low batt )
4. over voltage ( in case the IC goes south )
5. LOCKOUT mode ( shuts the unit OFF )
6. then ON function ,
7. 32 position voltage control ( Approx. .1 v per step ) only changes voltage when active ( must have the HIT switch activated to change the voltage .)
8. saves the last voltage setting even with batts removed
9 All other BP protections included
10. New PTC fuse inline with the batts , this will prevent ANY meltdown ( like thrown in the water etc. ) the fuse will BLOW then cool off and re set so it never needs to be replaced.
NEW FULL COLOR RGB LED display ( like the MID ) we have had this on the drawing board for 1 yr , I waited too long and the MID came out with it !!! stuff happens
NEW switches for UP - DOWN - Activate ( press and hold UP then press DOWN for LOCK MODE , press down to unlock )
we are looking at a Joystick control for later date.
Can it control my Roku?
Seriously, sounds like an excellent list of features, looking forward to it.
Seriously, sounds like an excellent list of features, looking forward to it.
Last edited:
AHHHHHHHHH why do you do this everytime Im looking at dropping money on another mod. Last time it was the VVPV that kept me from buying a GG. You better hurry Mike or Im buy a provari Mini..................Ill do it.................Im crazy.............Dont make me do it!!!!!!!!!!!!!!!
LOL , it takes time Atari ,. I am going into pre production right now , we still have to test the new switches in the tube , this is NEW ground for even the switch MFG so ???? might have to change the design if thye do not perform as expected ?? new stuff takes time.
I know I know I am thankful for what you do, and respect you as both a manufacturer, and a artist of your craft, I sure you are both a gentleman and a scholar, BUT IM LIKE A LITTLE KID AND I WANT NEW TOYS. Or maybe thats an adult male thing in general. Either way, seriously I know you do great work and can wait to see what you have for us next. Your releases have NEVER disappointed like most manufactures
After working for Mike for the last year, I can assure that he is indeed an artist, a gentleman, a scholar, AND a little kid who loves his toys! 
- Status
