Some homemade attys and genesis

[Scubabatdan]

Ok she is finished and I have filled it and letting her set staticlly to see is she dribble LOL

Ok it has been 15 min and she is still dry in the main chamber area. BTW it holds 3ml of juice.
Dan

 

[Dalton63841]

Ok she is finished and I have filled it and letting her set staticlly to see is she dribble LOL
View attachment 40177View attachment 40176View attachment 40178View attachment 40179
Ok it has been 15 min and she is still dry in the main chamber area. BTW it holds 3ml of juice.
Dan

That is a work of art if I ever saw one! So is this gonna be for sale ever? I'd love to test and/or review.

 

[UA72Riddle]

Lookin GREAT Dan!! If you are ready to test....I'll buy one from ya now and give a review....lol

 

[cos]

Dan yeh i will buy one also and i wont even test lol.

 

[Gummy Bear]

@ Dan,
Does she take a standard drip tip.

 

[MadmanMacguyver]

Anyone here going to Vapestock in Clearwater Fl?

Only If I can stay with you...

Still lookin for a ride so not likely...

I'm givin ya all shes got captain.......Dan hows that Modumust doing...are ya gonna be ok w/o one of your toys...I'm sure we can start a collection......oh wait you already have a COLLECTION

WOW the fleet just got bigger...gonna need more ocean soon...

 

[Dalton63841]

Anyone here going to Vapestock in Clearwater Fl?

Dying to, but the girlfriend just started a new job, so it won't happen this year, with any luck though, we'll be at the next one.

 

[lorderos33]

Anyone here going to Vapestock in Clearwater Fl?

Thinking about it

Sent from my Incredible using Tapatalk

 

[bmwzero]

Anyone got a ebay link to mesh? I've gone through 25 pages of this thread looking but eyes are killing me.

 

[lorderos33]

Anyone got a ebay link to mesh? I've gone through 25 pages of this thread looking but eyes are killing me.

Sure, here's one. It's the same stuff I have except in 1 1/2" rounds (I got 3" rounds).

(200) INA S/S Stainless Steel Mesh Screen 1-1/2" 325 | eBay

 

[slimest]

The most universal link for me to buy a stainless mesh for our purposes is this:
eBay My World - mesh-company
As a matter of fact, when I ordered the 400 mesh from their shop, they sent me approx 4x quantity of the mesh. All my friends now use it
P.S. Seems to me that the guys finish their buiseness... Too few items - only 400 mesh...

 

[bmwzero]

Thanks heaps.

 

[lorderos33]

Ok she is finished and I have filled it and letting her set staticlly to see is she dribble LOL
View attachment 40177View attachment 40176View attachment 40178View attachment 40179
Ok it has been 15 min and she is still dry in the main chamber area. BTW it holds 3ml of juice.
Dan

I'd definitely like to see some of these out in the wild, very nice work!!

 

[Quick1]

P.S. Seems to me that the guys finish their buiseness... Too few items - only 400 mesh...

I think they just put it up on eBay for us. It comes from here The Mesh Company: Online Shop for Woven, Knitted and Perforated Mesh for Art, Craft, Floristry, Modelling and Engineering
lol, Top Sellers:
1) #400 stainless steel mesh
2) #325 stainless steel mesh
3) #20 stainless steel mesh

 

[Scubabatdan]

@ Dan,
Does she take a standard drip tip.

Yes she uses a standard drip tip.

I'd definitely like to see some of these out in the wild, very nice work!!

I would too!

Sorry I crashed on everyone last night, I used her for about two hours. Unfortunantly I had a root cannal down eairlier in the day and had a massive headache so I laid down and did not wake up until this morning!

Ok so here is the review...

She performed very well, it does leak fluid into the main combustion area when you fill the tank until the tank is sealed. Then it does not leak at all.

Two things I do not like is filling the tank (have to be quick) and cannot see how much juice is left. So this got me to thinking, if I took a bottle nipple, and machined that into the top I could just fill the bottle and push it into place so no leaking into the main combustion chamber during refills and I could see how much juice I have. So back to the lathe ... Oh Darn... hehehehehe

I do notice that when vaping I get splittle and pops of hot juice spray from the coil, as they are splattering on my nice clear poly tubing, so I am still getting residual juice on the bottm of the conbustion area, but it is minimal as compared to the other version.

Oh and I WILL BE AT VAPESTOCK!!!! I have a SCUBAGENv3 that is being donated for the raffle. If I can get any more made I will donate them too.

Dan

 

[Gummy Bear]

Cool Dan, I hope you will wear more than JUST your hat tho.
I look forward to meeting you there.
I will bring a spare drip tip with hopes that you will let me taste test it.

 

[asdaq]

Dan, how about a little change to the nylon tube so that it is a T-shaped piece with juice feed in the side but lets the wick run straight down to the bottom of the chamber to re-absorb the spittle?

Or just a hole in the nylon tube to let the wick do the same thing?

 

[Scubabatdan]

Cool Dan, I hope you will wear more than JUST your hat tho.
I look forward to meeting you there.
I will bring a spare drip tip with hopes that you will let me taste test it.

Bring the extra tip and you can vape til you puke

Dan, how about a little change to the nylon tube so that it is a T-shaped piece with juice feed in the side but lets the wick run straight down to the bottom of the chamber to re-absorb the spittle?

Or just a hole in the nylon tube to let the wick do the same thing?

Good Idea, I have though about a housing for the coil and wick to set it, but then changing the coil would be a pain. The problem with a hole in the bottom of the tube is, it would allow the juice from the well or pool in the tube under the wick to leak out.

Thanks for brainstorming with me, keep em comming.

Dan

 

[Scubabatdan]

YAY, I think I made a break through on the seepage problem on the 1st vertical DSU, I chopped the wick and inserted a 1/8" OD x 1/16" ID tube into the bottle nipple and created a cone effect on the top of the wick, and inserted a 1" long piece of paper clip. This slows down the juice supply to the wick and allows small amount of air in when needed. It is not flooding anymore and wick great. Here are couple pics:

Dan

 

[bmwzero]

Thats awesome news dan! So the result can be replicated in the lathe process?