Squab ?
- Thread starter Clark Kent
- Start date
- th_trl_thread_readers 0
- Status
Get a good kayfun lite plus clone.
ehpro, hcigar or the Tobeco black edition.
Patriot is more common for cloud chasing.
if you want a dripper for flavor look at the magma, tobh, veritas, or any reduced chamber or a smaller 14mm dripper
ehpro, hcigar or the Tobeco black edition.
Patriot is more common for cloud chasing.
if you want a dripper for flavor look at the magma, tobh, veritas, or any reduced chamber or a smaller 14mm dripper
I can only speak to the performance of my FT Squape clone (manufacturer unknown).
As received, I found the draw to be terrible. A similar experience to trying to suck a golf ball through a garden hose. So it collected dust for quite awhile until I decided to do some drilling.
The SQuape gets it's airflow from the 510 (a HUGE downside to me), so I started with drilling the small hole in the 510 to 1/16" and then drilling through it fully to create another hole in the 510 on the opposite side. I then drilled the center hole to 5/64". It now has a pretty decent draw.
Figuring out the wicking was a bit more of a challenge, but it seems to do best if you keep your cotton just short of the edge of the deck.
It is easy to build in terms of mounting a coil, but I found that I had to wrap my coil in the reverse direction that I normally would to best position the coil.
As received, I found the draw to be terrible. A similar experience to trying to suck a golf ball through a garden hose. So it collected dust for quite awhile until I decided to do some drilling.
The SQuape gets it's airflow from the 510 (a HUGE downside to me), so I started with drilling the small hole in the 510 to 1/16" and then drilling through it fully to create another hole in the 510 on the opposite side. I then drilled the center hole to 5/64". It now has a pretty decent draw.
Figuring out the wicking was a bit more of a challenge, but it seems to do best if you keep your cotton just short of the edge of the deck.
It is easy to build in terms of mounting a coil, but I found that I had to wrap my coil in the reverse direction that I normally would to best position the coil.
Thanks for the info, I will look into the others and post what I end up with, Some people tell me Kayfun 3.1, others Kayfun light +, I am not sure of a big differece.
3.1 is a taller platform - Side air adjust.
Lite Plus has a lower profile and Bottom Air adjustment.
Air adjustment is normally a one time setup as most people have a preferred draw so bottom is only a slight inconvenience in trade for a nicer profile.
Lite Plus has a lower profile and Bottom Air adjustment.
Air adjustment is normally a one time setup as most people have a preferred draw so bottom is only a slight inconvenience in trade for a nicer profile.
I should have added to my post, that if choosing between the SQuape and a Kayfun, I'd pick the Kayfun in a heartbeat. My personal preference is for the Kayfun Lite vs. the 3.1
- Status
Similar threads
- Locked
