Squape E(motion)

[Moonwalker]

First tank filled so I have nothing yet to say except that it looks great, finishing is absolutely phenomenal and vape is delightful, maybe even better then on R but maybe it's also just subjective impression while playing with a new toy. Filling is easy even though people were worried about diameter of a filling hole. One thing that irritates me is that it's hissing or more precisely I can here air flowing much more then on R. Now when I think about it I am pretty sure that I have never heard that air sound on my R's.

 

[VictorC]

Thanks for review @Moonwalker
Tempted...

 

[Tomasius74]

Received the Squape E (2ml version) yesterday and used today with the W deck and the 1.6mm air restrictor (both came with the atty), here are my thoughts:

1. Great quality and design. It certainly is a beautiful tank and like it very much.
2. Placing the coil was easy (kanthal 28g, 2.5 mm, 1.4 ohms)
3. Wicking? No problem at all, but not as easy than with my Kayfuns (I mostly use the K5)
4. Filling is not as easy because the small holes and did not like having to guess when the tank was full, but I liked the whole filling system, it is clever. Now, the knob can be easily turned so I fear you can have accidental leakage from the top.
5. Easier to open and close than with the Kayfun but still think that the Kayfun liquid control lets you have better adjustments (fine tuning)
6. After using it all day zero condensation, no leaking problems at the base. Wow.
6. Gives me more flavor than the kayfun using a similar coil and vaping at the same wattage.
7. It is noisier than the Kayfun 5, it hisses. Also, the puffs are not as smooth as with the Kayfun 5 (little bit more turbulence and noise)

Edit: 8. The adjustable pin is great, better connection with the Radius. The K5 has given me some trouble in that regard.

I'm liking the Squape E very much and I know that I have to gain experience using it. Will it replace the K5?, not sure about that because seems that the vape quality is better in K5 but I'm glad and thankful I could get this atty.

 

[TraderX]

I think StattQualm reached the pinnacle with the Squape Rs if you are MTL flavor vaper. The Squape X was huge failure, miss, and step backwards. I predict the Squape E will be more of the same.

I wish StattQualm would get back to building uncomplicated normal sized flavor tanks. Instead they have chosen to produce over-engineered, ridiculously tall, skyscraper sized tanks that no one truly gets excited about.

 

[ToolmanTexas]

I think StattQualm reached the pinnacle with the Squape Rs if you are MTL flavor vaper. The Squape X was huge failure, miss, and step backwards. I predict the Squape E will be more of the same.

I wish StattQualm would get back to building uncomplicated normal sized flavor tanks. Instead they have chosen to produce over-engineered, ridiculously tall, skyscraper sized tanks that no one truly gets excited about.

They did.. they took lessons from X, put the mtl qualities of the R back in the design and the height is less than the KF5 and the TPD 2ml version is much smaller.

Not sure what else they could do here. The fact is the market is just not as frenzied as it was at one time for high end MTL RTAs with all the quality Chinese cloud blowers and < $100 higher ends.

 

[benley73]

No RTA will suit everyone , I didn't mind the X its very good in single coil mode.
with the single coil deck.
You can get the coloured top cap and airflow ring to make X look more E motion now.
.E motion has the airflow plugs for optional MTL or DTL draws if needed ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[zyprexa]

I now use the B deck with the 1.3 reducer. Really a huge difference with the original W deck. The 1.6 was included. Now really MTL!


Verzonden vanaf mijn iPad met Tapatalk

 

[benley73]

First tank filled so I have nothing yet to say except that it looks great, finishing is absolutely phenomenal and vape is delightful, maybe even better then on R but maybe it's also just subjective impression while playing with a new toy. Filling is easy even though people were worried about diameter of a filling hole. One thing that irritates me is that it's hissing or more precisely I can here air flowing much more then on R. Now when I think about it I am pretty sure that I have never heard that air sound on my R's.

Have you tried the B deck yet supposedly a better deck , I have only tried W deck same as Reload Squape

Sent from my ONEPLUS A3003 using Tapatalk

 

[munsterakey]

I've been a die hard kayfun guy but always interested in squape. I finally pulled the trigger on the squape e and am pleased. I've had leaking problems since day one with it but no worse than my kayfuns.

I am trying this clapton build in my squape with the b deck. Hopefully it stops leaking. The flavour is great so far.

 

[munsterakey]

Here is a pic

 

[benley73]

Here is a pic

Spaced 26g + 32g SS Clapton build on Be deck Flavours are very nice do is vape , that top cap though , its a bit of a pain if fill to top an close it sometimes
Dont always seal properly, IDK some times leaks other times its bang On , enjoying it though ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[munsterakey]

Spaced 26g + 32g SS Clapton build on Be deck Flavours are very nice do is vape , that top cap though , its a bit of a pain if fill to top an close it sometimes
Dont always seal properly, IDK some times leaks other times its bang On , enjoying it though ,

Sent from my ONEPLUS A3003 using Tapatalk

Have you had any leaking? I can't seem to get it to stop. It's not that bad but it's annoying. Seems like something isn't sealing. I don't think I could put more cotton in it.

 

[benley73]

Have you had any leaking? I can't seem to get it to stop. It's not that bad but it's annoying. Seems like something isn't sealing. I don't think I could put more cotton in it.

Yes Its quite annoying TBH
I do really like the tank a lot
but yes had lots either fill to much ,
an comes out top or seeps out of bottom Airflow, not the wicking its not sealing constistantly so passes which causes leaks an then only half tank left ,

My method not 100%
but does minimises it ,

1 /Shut off Airflow ring

2 /find right spot for fill holes on top cap ,

3 /fill with needle nose bottle,

4/ turn to seal top fill cap.
one way as far as goes then other way it tighten up then can gain a little more
, some times it turns an keeps the hole lined up when turned hmm
Other times its same but cant find fill hole , [emoji848]

5/ filled Turned sealed top fill ,
Flip tank up side down , eventually

6 /open bottom Airflow ,whilst upside down,

7/ Filp correct way vape
Still get a little drip or gurgling for 1st few vapes ,

Vape refill repeat ,
Love it but has a tendency to be a pain sometimes so not a Mobile pocket vape at times ,

Other times it works great no leaks it just not consistant and its not the wicking its that top fill passes Air which can cause leaks / seepage

As long as you can make sure the top cap fill holes are sealed as well as the Airflow ring once filled flip upside down open Airflow ,
This seems to stop 99% of the leaks ,
all good when done this way , Im actually really enjoying the (Be) deck on this tank
It has been my daily driver tor past week or so.
Delivery of dual deck has just arrived might try out in next few days ,
Flavours an vape have been excellent on B deck,

I like that there are very tiny notches on either side of deck posts side of screws helps with using Slightly bigger wires so able to run 26g+32g SS Claptons, one Airflow open.

These notches Should help with dual coil builds too one strand either side of post screw, but not tried yet ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[LeDuc48]

Hey guys new member here. I got this RTA yesterday I didn't clean it just put a build in it, filled it, and used it thru 10-12ml probably with no problems at all. Love it the R is currently my favorite. This morning I took it all apart and cleaned it well. After filling it back up after 2-3 pulls off of it the whole tank started dumping liquid out of the air holes. I took it apart and cleaned 3 different times with the same results. It's got me stumped. All the rings seem to be fine and nothing is missing. The refill holes on top weren't open either when I opened the juice control back up. I'm also clear on how it works to fill. Any help would be greatly appreciated , I'd HATE to have such a awesome RTA sitting on my shelf, not to mention it's not exactly cheap.

 

[ToolmanTexas]

Double check all o-rings again would be my suggestion.

 

[LeDuc48]

That's the only thing I can think of too. I replaced and lubed every o-ring this afternoon and tried it one more time....juice everywhere again.

 

[ToolmanTexas]

Man that sucks...get a good tank and then something goes boing... Alot of the new too fill tanks are just too many parts.. im actually preferring the simplistic bottom fill tanks over most top fills.

Hope you find and answer...if I see anything I'll post it here.

 

[LeDuc48]

Haha it does suck! I've always been a fan of Stattqualm too loved the quality and had really good luck until this. I agree with ya on the bottom fill too. Hopefully I'll find something out cause when it was working it was nice...thanks

 

[ToolmanTexas]

Haha it does suck! I've always been a fan of Stattqualm too loved the quality and had really good luck until this. I agree with ya on the bottom fill too. Hopefully I'll find something out cause when it was working it was nice...thanks

Me too, love my R(s)s, they perform flawlessly every time and super rich flavor.

If you work it out let us know!

 

[LeDuc48]

Will do man. I emailed Stattqualm so hopefully they get back to me. I've heard they have very good customer service