Squonk Porn!

[Bad Ninja]

Some inbound squonkiness...

CETO RDA-First Mesh RDA by Cthulhu MOD – CTHULHU MOD -Innovations for Vaping

Sent from my SAMSUNG-SM-N910A using Tapatalk

Looks like a nightmare to get the resistance right.

Whats the resistance per inch of that mesh?

 

[Shawn Hoefer]

Looks like a nightmare to get the resistance right.

Whats the resistance per inch of that mesh?

I'm using a 4 mm x 40 mm strip of 304 SS 300 mesh in a Taifun BT. It's coming out at 0.28 Ohms. I am running in SS304 mode on a SX Mini Q.

It's gonna depend on the mesh's gauge and grade...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Ben85]

Dual 18650 Bamboo squonker!

Sent from my iPhone using Tapatalk Pro

Am I correct in thinking that is a Sabre from Chris in the UK?

Any chance of some internals pics and some dimensions please? I was emailing him yesterday and am about to pull the trigger on one.

 

[TheWestPole]

Different look on the 20700/21700 woody.

BOTTOM FEEDERS= a place for everything modified and/or custom made

 

[listopencil]

I'm using a 4 mm x 40 mm strip of 304 SS 300 mesh in a Taifun BT. It's coming out at 0.28 Ohms. I am running in SS304 mode on a SX Mini Q.

It's gonna depend on the mesh's gauge and grade...

Sent from my SAMSUNG-SM-N910A using Tapatalk

That's a cool idea. Any differences in the vape using mesh instead of wire?

 

[Shawn Hoefer]

That's a cool idea. Any differences in the vape using mesh instead of wire?

It takes a lot more wattage than you'd think, but there's A LOT of surface area. The vapor is intense!

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[TheWestPole]

It takes a lot more wattage than you'd think, but there's A LOT of surface area.

Any luck on a mech, Shawn?

 

[B2L]

Different look on the 20700/21700 woody.

BOTTOM FEEDERS= a place for everything modified and/or custom made


View attachment 668421

Exquisite!

 

[btobw]

Haku Cruiser atop brass Custom Classic. Loving the very smooth air and flavour from the Haku.

 

[Doffy]

I've been a mech man forever. But this dna 75 has me hooked. So I'm going to buy a BAM by turbocad

Sent from my LG-H815 using Tapatalk

 

[penguiness]

I've been a mech man forever. But this DNA 75 has me hooked. So I'm going to buy a BAM by turbocad

Sent from my LG-H815 using Tapatalk

You are going to like the size and fit in the hand of the BAM. Plus you get to choose where you want your squonk hole to be, which side the door is on, delrin, amber ultem, black ultem, wood, etc...

 

[zoiDman]

I've been a mech man forever. But this DNA 75 has me hooked. So I'm going to buy a BAM by turbocad

Sent from my LG-H815 using Tapatalk

There is just Something about a Stumpy RDA that makes me Smile every time I see one.

 

[Rule62]

There is just Something about a Stumpy RDA that makes me Smile every time I see one.

I have 3 of them. A BF modded Stumpy is still one of my favorite attys.

 

[Shawn Hoefer]

Any luck on a mech, Shawn?

I've got a .27 Ohm build in the Taifun BT. I put it up on my Admiral, and it vapes, but it's a tetch on the cool side... 'course, that's with a cell that's likely in need of charging, but I don't see a fresh cell being a huge help in this situation... that .27 build would only be seeing 65 Watts, max, and I generally run north of 80 watts...

ETA: of course, if you like a cool vape, then this is right up your alley. Also, I'm using SS304. SS316 might change things up, too...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[zoiDman]

I have 3 of them. A BF modded Stumpy is still one of my favorite attys.

The Stumpy was the 1st RDA I modded into a Bottom Feeder. I took a 2-Hole Velocity style Post out another RDA and then ground the top hole off so it would fit. Then used a FDV BF pin.

I don't use it all that much anymore. The NarDa kinda Supplanted it. But I keep it in the Front on my RDA Rack because the Look of it is Off the Charts cool.

 

[TheWestPole]

I've got a .27 Ohm build in the Taifun BT. I put it up on my Admiral, and it vapes, but it's a tetch on the cool side... 'course, that's with a cell that's likely in need of charging, but I don't see a fresh cell being a huge help in this situation... that .27 build would only be seeing 65 Watts, max, and I generally run north of 80 watts...

ETA: of course, if you like a cool vape, then this is right up your alley. Also, I'm using SS304. SS316 might change things up, too...

Sent from my SAMSUNG-SM-N910A using Tapatalk

Hmmm, sounds borderline. Well, I'll futz with it when it gets here, starting small I suppose. I have only one regulated squonker which the Cthulhu won't overhang.

 

[Shawn Hoefer]

Hmmm, sounds borderline. Well, I'll futz with it when it gets here, starting small I suppose. I have only one regulated squonker which the Cthulhu won't overhang.

I think I have 3... not worried, though. I don't HAVE to squonk

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Rule62]

The Stumpy was the 1st RDA I modded into a Bottom Feeder. I took a 2-Hole Velocity style Post out another RDA and then ground the top hole off so it would fit. Then used a FDV BF pin.

I don't use it all that much anymore. The NarDa kinda Supplanted it. But I keep it in the Front on my RDA Rack because the Look of it is Off the Charts cool.

I never got in on the NarDa. But with all the hype about other attys, like the Hadaly, of which I have a couple, I'll still take the Stumpy over it. IMHO, the Stumpy remains one of the best attys ever made.

 

[penguiness]

I never got in on the NarDa. But with all the hype about other attys, like the Hadaly, of which I have a couple, I'll still take the Stumpy over it. IMHO, the Stumpy remains one of the best attys ever made.

I have tried nearly everything hyped about and still keep using my Stumpy's every day.

 

[zoiDman]

I never got in on the NarDa. But with all the hype about other attys, like the Hadaly, of which I have a couple, I'll still take the Stumpy over it. IMHO, the Stumpy remains one of the best attys ever made.

Nothing wrong with the Stumpy. Great Flavor. Nice Air Flow. An 11 on a scale from 1 to 10 Looks wise.

I just give a Slight Edge to the NarDa when it comes to Flavor. Not a game changing Flavor edge. But an edge none the less.