SS Mesh & Aga-t2 Far superior

[jonjay]

Some of you may know I had a few issues initially setting my aga-t2 up with ss-mesh, but it's totally normal and there is a bit of a learning curve, but I believe I pretty much have it down pat (at least for today )

This thing is far superior to anything else I have. I have an igo-l rda which I actually love too. But i've tried various rba's, rda's, tanks, cartos, clearos and my aga & ss mesh is unreal and perfect every time I use it and it's my goto. I wish it was a bit tinier, I feel it's fragile as well, but this baby is superior to anything.

Anybody new to vaping or been for a while and looking to get into the next level, this is where it's at. The 1000's of people who you read all over the forums who talk about ss mesh and rba's well they're not lying!

Just wanted to share!

 

[mogium]

Now it's ceramic wicks and sub 1 ohm coils

 

[jonjay]

I was going to try sub-ohm coils, i'm afraid im going to blow myself up.. I have a k100.. should I just do it and if I blow up come after you?

 

[MCMLXX]

Did you drill the wick hole out or just the standard size? I listen to the pro on youtube and some of them say it's better with the bigger wick hole. Thank you for your answer.

 

[eHuman]

AGA-T with 1Ω coil, IGO-L with .8Ω coil.
Here's the AGA-T on a used battery:


Notice that these a short pulls, and the tank is almost empty....

 

[SirSteve]

My tank broke Saturday when I took mine apart to clean it, got my new ones yesterday and just got it back together. Had been running SS mesh, followed ehumans advice, and I really enjoyed it. But just for the heck of it, today I put a cotton wick in, I even used the same coil that has been running for a month now. I don't expect this coil/wick setup to last long, especially seeing as how the coil has been around, but I just wanted to try it.

Glad you found your desired results.

 

[jonjay]

No I found no need to do any drilling. But I do have a DID chobra clone I may attempt to drill the air and wick hole. It's mad tiny in both of them. I find them crap compared to the aga though, thus far.

 

[jonjay]

Haha, so i figured i'd go take my drill to the DID Clone and open the air hole. WOW. much better. may be too big, but its actually good. Problem solved. Now if only I can get it to wick better.

 

[BuzzKilla]

Did you drill the wick hole out or just the standard size? I listen to the pro on youtube and some of them say it's better with the bigger wick hole. Thank you for your answer.

The pros.... HAHAHAHAHAHAHA
no such thing...
we are all the same, some of us just have more play time...

I'll consider someone a professional when i see a degree framed on their wall with e-cigs written on it.
Coils 101 - The art of the perfect tension
Wicks 304 - Ceramics ans Stainless Steel

Jonjay, I've always found that the AGA has always had poor wicking.
no matter my wick setup, i always had to keep the dam thing tilted to keep my 0.8Ω coil wet...
But keeping my mod tilted high, gave me street cred.....

Keep tinkering, you will eventually find your sweet spot.

 

[eHuman]

The pros.... HAHAHAHAHAHAHA
no such thing...
we are all the same, some of us just have more play time...

I'll consider someone a professional when i see a degree framed on their wall with e-cigs written on it.
Coils 101 - The art of the perfect tension
Wicks 304 - Ceramics ans Stainless Steel

Jonjay, I've always found that the AGA has always had poor wicking.
no matter my wick setup, i always had to keep the dam thing tilted to keep my 0.8Ω coil wet...
But keeping my mod tilted high, gave me street cred.....

Keep tinkering, you will eventually find your sweet spot.

Before I retired my ZMax2, just to see if it could be done: Vaped a complete tank (aga-t2) bone dry (30g 1.5Ω @ 10w) in the vertical position. It is all about the wick. Solid roll 500 mesh, fill screw in place, just oxidized enough to get it done.

 

[BuzzKilla]

Before I retired my ZMax2, just to see if it could be done: Vaped a complete tank (aga-t2) bone dry (30g 1.5Ω @ 10w) in the vertical position. It is all about the wick. Solid roll 500 mesh, fill screw in place, just oxidized enough to get it done.

did that with the fill screw out... still not fast enough for my 28ga. 0.8Ω coil... it would dry up after the 3rd hit.
maybe just too much V.G.
never a dry hit on my other genies...

but, it worked for you so...

 

[michaelsil1]

Before I retired my ZMax2, just to see if it could be done: Vaped a complete tank (aga-t2) bone dry (30g 1.5Ω @ 10w) in the vertical position. It is all about the wick. Solid roll 500 mesh, fill screw in place, just oxidized enough to get it done.

How many inches did you roll?

 

[eHuman]

1.5" x 3" (mainly for conservation of my SS sheet), but have put 3.5" in the stock hole /w no problems.

 

[Statistic]

Once I got my AGA-T+ set up the way it's "supposed" to be (thanks again eHuman!!!) this thing has been blowing my mind all week. Just freaking amazing.

I just ordered 2 AGA-T2's and an AGI

Now all I need is a couple more mods to put them on hehe

 

[eHuman]

I just LOL'd looking at buzzkilla's shirt and michaelsil1's avatar...