Stardust V3 (good news for us stardust lovers)
- Thread starter WolfeReign
- Start date
- th_trl_thread_readers 0
- Status
Well, it's always possible to strip/wear out threads, but it doesn't happen often. It should be good for many years, and at $2.25, I'd say that's decent 
Nice. Actually I might even have one of those. I'll have to check my adapter baggie when I get home. However it should be noted that the adapter would have to be unsealed, as the Stardusts have serious airflow issues on some adapters (and some eGo batteries) unless you drill small holes in the eGo skirt.
Yep. Canvape, Vaporus and CNF will both be carrying 2.0. Not sure what replaceable heads the first two will be carrying, but I know CNF will have all available resistances. (1.8, 2.4, 2.8 and 3.2). Probably more expensive there though.
I wouldn't worry about it. Basically, get the adapter and try it out! If you find the draw is too stiff, it's an easy fix. Just drill a couple of small holes in the bottom metal "skirt" on the Stardust
Been using these for some time now, and cracking is only a problem if you: A) drop it B)Use Acidic juice like Atomic Cinnacide C) take it apart to clean it using brute force.
Personally, I started by trying to take them apart to clean them (Version 1) but found that it compromised the seal after reassembling them too many times. The preferred method for me is to 'fish out' the metal insert and plastic sleeve using a paper clip, dry burn it and carefully replace the parts using the same hi tech tools (the paper clip).
Danny that's not true. Spiderweb cracking along the bottom skirt is extremely common in v1 and v2. Every single one of my v1 and v2s cracked without using caustic juices or dropping or cleaning, just regular usage.
I've been using two v2 Stardusts for maybe a couple of months. Only one has cracked, but I was using AVE's Blend 4, which to me seems rather acidic.....but as most of us now know, some have had better luck with these than others.
the V3 are supposedly made of a different type of material that is more resistant... "supposedly" being the key word... my V2 all cracked eventually just in storage but my V3 are still kicking real well.
Well, for what it's worth, my V3s (technically not called a V3, just by way of trying to avoid confusing for the forthcoming Stardust 2) have been performing perfectly without any spider cracks along the base. Haven't really used any caustic juices in them yet though, but thus far they've held up, and I've been using mine for about a month now. They don't clean up well it seems -- after rinsing and dry burning the flavour just didn't come back quite like it should, but since I'd used it for 3 straight weeks without cleaning I suppose I ought to expect that.
I just received some Stardusts today and for some reason the first one I took out of the package and unscrewed the driptip.. there was already a bit of liquid on it and a bit on the top of the tank. Is this normal?
Probably just some prime fluid. If it was in a sealed package I wouldn't be too worried.
I am about 2 months in on two V2's and no cracking on my two or my wifes....I have been vaping like crazy with them for the past 17-18 days and for the most part one of them lives in my tool belt....yup in my nail bag getting banged and slammed around all day in full sun!!!!......it is inside a end mill/drill bit case I have but let me tell ya folks I am sore as heck after this month long project and if it feels half as bad as I do I am shocked it still lives lol....well no cracks!!!! not even one!
Jonathan
Jonathan
I will have to admit, for my double chocolate, the stardusts last way way longer than my boge dct. one has cracks but i've dropped it a thousand times, hit the edge of the garbage can shaking out old juice...
but, my newest riva battery I can't use them without modding. I had to cut a slot with the dremmel about 3mm, (almost to the "glass") just so I could get a draw off. I have one more and will try a side cut this time as the straight slot sure weakens the housing.
but, my newest riva battery I can't use them without modding. I had to cut a slot with the dremmel about 3mm, (almost to the "glass") just so I could get a draw off. I have one more and will try a side cut this time as the straight slot sure weakens the housing.
- Status
Similar threads
