Started and wanting some change

[KiLLeRr KeN]

So I started about a week ago, and I have an ego c-twist with a ce5 top coil tank. Pretty good with 3.6v.
I've been reading online here and I've been looking at APV (mods right?) So far I have looked at itaste VTR and the Vamo V5, I didnt know that the VTR was almost double the price, I don't know why, maybe all the stainless steel lol.
The next thing someone recommended me the SID from smoketech (another entry). I am not sure which way to go though. Any inputs from the seasoned users.

 

[FearTX]

Those are all decent "bargain" mods. They do the job and lots of people are satisfied with them, some people are not. My suggestion would be to find a local store if you have one and see what they have that you can hold. What you like is going to be what you like.

You will get a ton of answers to this from all corners of vapeland.

Buy a Provari.

 

[CreepyLady]

Sigelei Zmax, VTR or MVP if you are looking for VV/VW dependent upon your price point. Also Vamo V5.

The price difference between a Vamo V5 and a VTR is based on several things - overall function - pretty identical. Construction is the big difference. VTR - heavy stainless steel. Vamo - Chrome coat over copper tube. That alone is a sheer difference in material cost... then the Stainless Steel vamo - about half the metal of the VTR (VTR is HUGE lol)

 

[InTheShade]

Rather than just saying what I think is best (cough, not a provari) I'd recommend taking a look around the APV forums so you can see what people are posting about there.

Variable Voltage APV Discussion

It really depends what you want in an APV. Most of the less expensive ones are similar in both form and function. So I would say some of the more popular tube APVs like the Vamo, SID, Zmax, SVD etc are all similar in both quality and performance. Now you also have some box APVs like the MVP / MVP2, VTR and such and you have some APVs that defy categorization like the Innokin 134.

Of course you also have your higher end APVs like the previously mentioned Provari. You have a lot of options.

Best advice was given by FearTX - that is to find a local B&M that actually has a couple in stock so you can go see and use them.

Now of course if you want to spend $200+ on a mod, battery and charger 7 days into vaping, then a Provari is an excellent choice - it's just not the right APV for everyone.

 

[Lumpy]

im pretty new to the vaping thing as well but i have quite a few toys already. i would reccomend the itaste mvp v2. i got one on ebay for $43 brand new and authentic. i LOVE this device. i avent used my egos since

 

[KiLLeRr KeN]

Rather than just saying what I think is best (cough, not a provari) I'd recommend taking a look around the APV forums so you can see what people are posting about there.

Variable Voltage APV Discussion

It really depends what you want in an APV. Most of the less expensive ones are similar in both form and function. So I would say some of the more popular tube APVs like the Vamo, SID, Zmax, SVD etc are all similar in both quality and performance. Now you also have some box APVs like the MVP / MVP2, VTR and such and you have some APVs that defy categorization like the Innokin 134.

Of course you also have your higher end APVs like the previously mentioned Provari. You have a lot of options.

Best advice was given by FearTX - that is to find a local B&M that actually has a couple in stock so you can go see and use them.

Now of course if you want to spend $200+ on a mod, battery and charger 7 days into vaping, then a Provari is an excellent choice - it's just not the right APV for everyone.

You said that the less expensive ones are similar in function, what functions change when getting a more expensive one rather then a cheaper one. I personally thought the VTR in price was expensive, until i just looked up the Provari lmao

On a second note, i think a box mod would be better suited for me since i work outside and rather take a box and put it in the pocket of my uniform, rather then thinking a cylinder mod would either bend or break... thoughts on this?

 

[Frenchfry1942]

I have noticed that internet prices can be rather variable. I have a main internet vaping supplier that seems focused on non-foreign stuff. It also covers all of my needs.


I like the VAMO5. I don't have one, but it seems to have good specs.

As to the VTR, it is a model under iTaste.

You can always ask on here about supplier recommendations.

Hope helps,
Jere

 

[The Ministry]

Owner of a Vamo V5 and it's ticking all my boxes for now, but it's fricking HUGE when you throw a 18650 battery in with a tank on top, bear that in mind. If size is an issue you may be better off with a MVP (box mod)

I love the Vamo though, and am already saving for an MVP and a ProVari...

If you can get along to somewhere you can physically see and hold the devices, all the better. The Vamo didn't look too big until I got it and started using it. It's not "too" big for me, but damn I get some funny looks ha-ha. It's quite the conversation starter, that's for sure..

 

[InTheShade]

You said that the less expensive ones are similar in function, what functions change when getting a more expensive one rather then a cheaper one. I personally thought the VTR in price was expensive, until i just looked up the Provari lmao

On a second note, i think a box mod would be better suited for me since i work outside and rather take a box and put it in the pocket of my uniform, rather then thinking a cylinder mod would either bend or break... thoughts on this?

Now you've done it - there are several (hundred?) threads where people are discussing the provari compared to other APVs. I don't own a provari so I cannot possibly comment. If you wait a bit, someone will be along to either a) say it's not worth it, or b) say it's the best thing since sliced bread. Me, I think it's somewhere in between. I have 2 Vamos, and a Zmax so I have all the tube APVs I need.

I'll just point you in the direct of the provari sub-forum. ProVari for more information.

 

[KiLLeRr KeN]

Theres store around me that i think carries a VTR not sure on the Vamo v5, maybe some around me has one.

 

[The Ministry]

If you want to carry the device around in your pocket (any) then I'd go more towards a MVP than a cylinder mod, personally. I work in an office so it's not a big deal to me (apart from the driving where the drinks holder is too shallow for the V5, it bounces around). Maybe a Vamo in 18350 with a small tank might work, but again, I'd get a hold of it first before buying.

A box mod (MVP or similar) would be ok though, would be less imposing than a cylinder mod I'm guessing (I don't own one yet, but will do soon)

 

[Papa_Lazarou]

If they have a VTR, they will have the MVP for a certainty. Check them for yourself, but the VTR is easily twice the weight (NOT pocket friendly) and 2.5x the price for no additional features. Quality, durability? Too early in their product cycles to know which will outperform the other.

Really, you wouldn't go wrong picking up a MVP - usable with any kind of carto or tank (including rebuildables, if you go that route eventually), very long battery life, compact for a box mod. You'll soon discover that you'll need backup devices for all kinds of reasons, and the MVP would fit that bill as well if/when you move on past it later.

 

[TheReign]

personally i think box mods look a little silly. BUT, thats just my opinion. i've heard wonderful things about them and am not going to start bashing at any point of time. however, i do like my svd by innokin, in 18650 mode it's big but it's not too big for me. if you were to get a cylinder style mod, i would suggest a telescoping style. you will be able to go to shorty mode for when your out and about, but when you are at home. you can have a lightsaber to wave around and vape with

 

[Butters80]

The vamo V5 has been a solid performer for me. I use it mostly around the house and in the car.....not so much at work or when out and about. It's just easier for me to grab a spinner when I'm out for the evening, but the vamo is waiting in the car!

 

[Junkmountain]

I like my Vamo, but I like my VTR better. The SID is junk IMO. I found the VTR to be the easiest to use as far as settings. It's a heavy beast though so you may not find it comfortable in a shirt pocket. I am still confused by the settings on the MVP2. I don't like having to push two buttons to read this and then do that it read this and what/which one is that anyway. Too confusing for me. So the VTR is my all day and my other's are now all drippers on mech mods.

 

[KiLLeRr KeN]

Well a facebook friends just showed me his NES controller DNA20 mod. I like it, not sure i understand how they get 20W from just one battery with constant vape though...

 

[Keeferes]

So I started about a week ago, and I have an ego c-twist with a ce5 top coil tank. Pretty good with 3.6v.
I've been reading online here and I've been looking at APV (mods right?) So far I have looked at itaste VTR and the Vamo V5, I didnt know that the VTR was almost double the price, I don't know why, maybe all the stainless steel lol.
The next thing someone recommended me the SID from smoketech (another entry). I am not sure which way to go though. Any inputs from the seasoned users.

I have the VTR and the vamo v5. Also have a sid on the way. Should be here Tuesday actually. I also have a regular ego I started with. The VTR is crazy heavy. 3 ounces shy of a full pound. This one I use for on the go when I am out. The vamo is great. I use variable wattage, and like the size, but I can put a smile 18350 in and shorten it if the mood hits me. I can't speak on the sid yet, but the info out says pretty much the same as the other two in terms of performance. Keep in mind with any of them you will need to purchase batteries and a charger with it. I use efest brand batteries myself.

 

[KiLLeRr KeN]

Yes i do know about the battery, if i do go with an external battery I will be getting the Panasonic battery which has the biggest Mah, which I want (lol wants and needs). I haven't thought about a telescoping one yet.

 

[edyle]

Whatever you get just make sure it has both the 510 threads and the eGo threads so that you keep your options open for what you put on top; the 510 interface has problems.

 

[InTheShade]

Whatever you get just make sure it has both the 510 threads and the eGo threads so that you keep your options open for what you put on top; the 510 interface has problems.

Which rules out the Provari... It's 510 only.

Seriously, most popular VV/VW tube and box mods are both 510 and ego cone threading. The 510 'interface' is a tried and tested connection that has stood the test of time. The 510 on the Provari has a one year warranty from Provape, so you should be OK if you decide on that.