Suggestion fro IPV3 150 Watts and Batteries

[Wynn Khanh Dang]

Well, Im getting a IPV3 150 watts but i will not use no more than 50 watts. I will also sub ohm but also vape at a regular ohms. I do know what batteries to buy and how many amps i need too. I was planning to get a sony vtc5 but dont know how much aps i need.IS there any suggestions?


P.S I will only vape at .3 ohms. Maybe once in a while .2. Never .1

 

[steved5600]

If your going to us a 150 watt mod you should ALWAYS us batteries in it rated for that use. So You want to get a 30 amp battery since is has the batteries in series. Also remember that with all that wattage you can go higher in resistance bigger coils. Oh use good organic cotton for a wick.

 

[Ryedan]

It doesn't matter what resistance you're using in this mod because you set the watts and the mod keeps outputting those watts no matter atty resistance.

You've got 2 batteries in this mod and at 150 watts they will be outputting about 27 amps each so you need to use 30 amp batteries as Steve said. Options that were in stock today are:

Orbtronic SX30, 1600 mAh $12
Sony VTC4 2100 mAh at Illumination Supply for $8.50. The best deal right now, but they don't have many in stock so if you want them grab em while you can.
RTD Vapor has VTC4 for $13.

Good luck with it