Supreme RDTA by Steam Crave
- Thread starter Petabread
- Start date
- th_trl_thread_readers 0
- Status
Same here with my Supreme V2 on my RX200. Flush. After I cleaned it I lubed everything so my AFC ring turns very easy. For me, Adjusting the JC while the atty is on the mod is a little different. I press my thumb against the knurling on the bottom of the atty so the atty does not turn. Then while doing this I grip the ridges/bump out on the JC ring and turn it. It's a "tight' turn which is a good thing. For a refill I always remove the supreme from my mod. Learning curve for all of us with our new toy! Love your build. Mine are a little sloppy as I continue to play. /lol
Love your build. Mine are a little sloppy as I continue to play. /lol
Thanks for the complement. After I disassembled and tried to shorten the 510 (which I did not have to do). I decided to try a new build as the first one had too much ramp up time and I had to jack up the watts quite a bit, which gave me a burnt taste.
Now I have 28g spaced 3.5mm 10 wrap ss316L. Vapes much better. Love it so far. Before I had problems with my rta's that I could not put the watts too high or I get burnt taste. Now I have problems with my aromamizer supreme that I can't put the watts to high or it produces too much vape LOL
Last edited:
Tried swapping out the o-ring and it didn't help. Going to break the whole thing down today and see if there's anything to tighten up.
Live on the wild side! Need more watts for your Clapton's! Watch the lights in your house flicker!
300 WATTS!
/using a little humor and sarcasm. No offence intended if you enjoy living on the wild side.
300 WATTS!
/using a little humor and sarcasm. No offence intended if you enjoy living on the wild side.
I tried pushing this baby to 110w on a 28g spaced 3.5mm 10 wrap ss316L build and it vapes it no problem. I usually do mouth to lung hits, that's why I use thin coils for the fast ramp up time, but I tried doing lung hits at 110w and it just keeps going.
Can't get past 110w on my current build (voltage limitations), but I'd love to push it further and see how far I can go.... another time perhaps.
Can't get past 110w on my current build (voltage limitations), but I'd love to push it further and see how far I can go.... another time perhaps.
Last edited:
Ok I just tried a build 24g 3.5mm 13 wraps ss316L. It put me around 0.4ohms, which would of been the sweet spot to get up to 200w. Vaped it around 70w and got burnt hits.
Going back to my other build, it vaped much better.
Going back to my other build, it vaped much better.
My first build was also 3.5mm but with Kanthal, Did a 6 wrap dual spaced coil and it came out to 0.3 ohm.
The flavor on the Supreme is just in your face good with dense cloud production! Had a few issues intially like the first time trying to fill it, the supreme just completely leaked out juice like crazy from the airholes when I wasnt paying attention. (at least the silicone cover was on my sig 150!)
Seems if I turn the juice flow all the way to the 6th bar, I get some leaking issues, at least after filling. (I close the airflow and the juice flow both when I fill) Right now, I have the supreme's juice flow at the 4th of 6th bars and it doesnt leak if I dont go past there opening it anymore.... Really gets tons of juice flow still with it not all the way opened like that. Speaking of which I am a little disappointed how quickly I went through a tank of juice. In just 24 hours the supreme pretty much needed refilling when my original Aromamizer would get me 2-2 1/2 days of vaping. Might pick up an Aromamizer V2 as the tank should last as long as it does for me on the V1. Maybe Im not doing something correct with the Supreme in my wicking or coil placement but I placed the coils(horizontal)exactly where I would in relationship to the posts and wicked the same way I always do with Rayon on my V1. Perhaps I should turn the Juice Flow down to the 2nd or 3rd bar and see if my tank will last a bit longer... Vaping 85% VG Juice
The flavor on the Supreme is just in your face good with dense cloud production! Had a few issues intially like the first time trying to fill it, the supreme just completely leaked out juice like crazy from the airholes when I wasnt paying attention. (at least the silicone cover was on my sig 150!)
Seems if I turn the juice flow all the way to the 6th bar, I get some leaking issues, at least after filling. (I close the airflow and the juice flow both when I fill) Right now, I have the supreme's juice flow at the 4th of 6th bars and it doesnt leak if I dont go past there opening it anymore.... Really gets tons of juice flow still with it not all the way opened like that. Speaking of which I am a little disappointed how quickly I went through a tank of juice. In just 24 hours the supreme pretty much needed refilling when my original Aromamizer would get me 2-2 1/2 days of vaping. Might pick up an Aromamizer V2 as the tank should last as long as it does for me on the V1. Maybe Im not doing something correct with the Supreme in my wicking or coil placement but I placed the coils(horizontal)exactly where I would in relationship to the posts and wicked the same way I always do with Rayon on my V1. Perhaps I should turn the Juice Flow down to the 2nd or 3rd bar and see if my tank will last a bit longer... Vaping 85% VG Juice
Well #1 you should always close the juice flow when filling it. That's largely why you're getting leaks. Secondly, yes, it goes through juice really fast...but that's because it's efficient at what it does. When it's getting juice, vaporizing it, and giving you tremendous flavor and vapor it's doing what it's supposed to be doing.
Turning the juice flow down probably won't impact how much you use. I have mine at the midway point and it's made no real difference in juice consumption. Bottom line though is that it's not 'wasting' juice. It's 'wicking, vaporizing, and performing' more efficiently than other tanks. Most of the new line of tanks are doing that too.
I get zero leaking issues. I did once forget to turn the juice flow off when filling and it leaked like crazy. Other then that no problems and I vape it on the highest juice flow setting.
24 hours is nothing, if I chain vape I can down a whole tank in like 20mins LOL
Interesting and thanks. With my Supreme V2 with a dual Kanthal build (0.7) with contact coils and KGD using 65% PG and 35% VG this little gem still sucks juice like a starving piglet. /lol I have my JC set to the second bar! I just checked my build and it's wicking properly and saturation looks great.
I'm still playing with builds like most of us as we tackle the learning curve. I'm not having any luck with my Clapton builds. I've tried a couple wicked various ways all around 0.5 and if I crank the JC to the third bar I think the Claptons require at least 60 watts ??? and that's too high for me. So far my max is 40 watts with various AFC settings. Claptons produce leak city out of the AFC set to the third bar. I have not given up but I know from my experience for whatever that may mean that if I can't nail a build after say 6 tries it's time to revert to what works and I must say with dual Kanthal's in power mode on a RX200 it's a great vape and better than any of my other toppers for this juice.
I'm still playing with builds like most of us as we tackle the learning curve. I'm not having any luck with my Clapton builds. I've tried a couple wicked various ways all around 0.5 and if I crank the JC to the third bar I think the Claptons require at least 60 watts ??? and that's too high for me. So far my max is 40 watts with various AFC settings. Claptons produce leak city out of the AFC set to the third bar. I have not given up but I know from my experience for whatever that may mean that if I can't nail a build after say 6 tries it's time to revert to what works and I must say with dual Kanthal's in power mode on a RX200 it's a great vape and better than any of my other toppers for this juice.
I vape high Nic Level though. 24 MG of store bought EJuice and 18 MG if im making my own(I have VapersTek Nic Base which is more potent than what most vendors use)
Most people especially in a dripper tank would say that is way too much but honestly when in a hurry I can vape for say 5-10 mins take some huge hits and really feel the nicotine(in a good way)
Chain vaping for me is like 25-30 mins tops. Saves money and saves battery life with higher Nic but you have to have a tolerance.
For those of you trying to get 200W out of this tank: Vertical, 4 1/2 wrap 4mm ID fused claptons, 0.5mm fused with 0.2mm kanthal, wicked with rayon. I prefer it at 100W but it'll handle 200W no problem, four 1-1.5s pulls one after another, daren't try any more though.
- Status
