can anyone point me in the right direction? I got switches from fat daddy and the button is 14mm and the bezel is 22mm , im looking for a 10 amp- switch way smaller more like 10mm , I want to make the smallest possible box mod, any help is much appreciated
switches
- Thread starter scorcies
- Start date
- th_trl_thread_readers 0
- Status
For a 10 amp switch you will probably have to make it yourself. Some folks use brass stock that is pressed together by the button.
A much easier solution is to use an n-channel mosfet and any tiny switch you want. It is a simple circuit but use a good mosfet
A single mosfet should be fine for 10 amps. You may need two if you get up above 30 amps.
A much easier solution is to use an n-channel mosfet and any tiny switch you want. It is a simple circuit but use a good mosfet
A single mosfet should be fine for 10 amps. You may need two if you get up above 30 amps.
If you use the mosfet you can use virtually any switch you want. This is one of my favs though.Mitec Push Button - 12mm or 16mm - Clicky
- Status
