beautiful! what size did you cut the screen cut out to? thinking about doing an sx350...
SX350 Box Mod in progress
- Thread starter Lentulusbatiatus
- Start date
- th_trl_thread_readers 0
- Status
The inside of the frame is W17mm x H12mm but it could be a little smaller if you wanted, the info on screen is a good few mm from the edges.
I've done most of the work on my new mod. The main body will be anodised and dyed black and the front section will be plated either Silver or Nickel.
Still to mill out for bottom plate yet and drill out for the 510 connector, then give it all a good sand/polish and clean up.
Still to mill out for bottom plate yet and drill out for the 510 connector, then give it all a good sand/polish and clean up.
Got the plating and anodising done, also milled out the inside more and made a cradle for the sx350 and usb pcb. Will get the electronics in tomorrow and it'll be done, will post some better pics tomorrow but here's one with my phone (without a flash lol)
I have silver plated all contacts inside and also changed the default wiring on the sx350 with silver plated copper wire, teflon coated.
I have silver plated all contacts inside and also changed the default wiring on the sx350 with silver plated copper wire, teflon coated.
- Status
Similar threads
