SXK Nebula Wine RTA

[EyesoreJr]

Maybe very slightly less, but very close.

So if I had a glass tank I got for my erlprinz and I use the chimney from it on the deck of the wine tank, I should be able to use the glass tank as well or are they different diameters? An earlier post says that the wine tank glass is 22 diameter outside and 19 diameter inside but I don't know what the erl is inside. I do know the outside diameter of the erls are 21 diameter with the standard poly tank.

 

[ccwaters]

Erl is the same inside diameter, so yes tanks will fit.

 

[VaPreis]

Mine finally showed up today, and I'm very pleased with it. Nice build quality. Very easy to coil and wick. I built a 3mm, 26ga, 6 wrap spaced coil that seemed to fit nicely. I fanned the wick tails out on the deck, but did not stuff the channels. Seems to be wicking well, and no leaking.

I would call this a very airy MTL tank. While I'd prefer AFC, the draw suits me pretty well. Flavor is darn good on it. You could do a slightly restricted lung hit, but it starts to sound a little wheezy. MTL, I have no noise issues.

I also could not get the glass tube off of the top cap.....but I really don't need to. I'm hoping it will loosen up with some use.

Overall, best 12 bucks I've spent on vape gear in quite a while. I may put a couple more in the Fasttech cart.

 

[VaPreis]

On the Sig75W with a KS RTA drip tip:

 

[Aracos]

So the description says bottom fill, but I don't see a screw on the bottom. So do you unscrew the tank from the base to fill it?

Sent from my E6782 using Tapatalk

 

[VaPreis]

Yes. Flip it over, and unscrew the base.

 

[Roadtrip635]

I've only seen a silver version, does anyone know if it's available or will be available in black?

 

[Mazam]

I've only seen a silver version, does anyone know if it's available or will be available in black?

No black so far.

I've really been enjoying mine. Just wish they'd stock some cheap replacement glass already so i could break this one off (because it's not coming off otherwise) and go with the black o-ring look

 

[ccwaters]

I don't miss that 3mm I removed from the bottom of mines chamber one bit, and it is quite nice to be able to use the Subtank Mini glass on it.

Mine was not coming apart without breaking the original glass.

 

[EyesoreJr]

So I ordered one of these from Fastech on Black Friday and the package hasn't even left China yet! Is there some sort of holiday going on in China? I also ordered a Evic VTC mini (pre-order) about 4 days before the wine tank and I've had it for 3 days now. What gives?

 

[ccwaters]

So I ordered one of these from Fastech on Black Friday and the package hasn't even left China yet! Is there some sort of holiday going on in China? I also ordered a Evic VTC mini (pre-order) about 4 days before the wine tank and I've had it for 3 days now. What gives?

Hard to say with China, but if it went through Xiamen it will probably not update until it hits the US, your about 13 working days into shipment, FT typically takes 3-5 days before it even hits the Shipper, Xiamen is extra slow. Considering additional traffic due to Holidays I'd probably not be to stressed over it for another week or two

 

[EyesoreJr]

Hard to say with China, but if it went through Xiamen it will probably not update until it hits the US, your about 13 working days into shipment, FT typically takes 3-5 days before it even hits the Shipper, Xiamen is extra slow. Considering additional traffic due to Holidays I'd probably not be to stressed over it for another week or two

That's exactly where it says it is. Xiamen. Thanks for letting me know.

 

[Roadtrip635]

That's exactly where it says it is. Xiamen. Thanks for letting me know.

For me it's usually 4 days from Xiamen, until I see an update, usually once it gets to Chicago.

 

[ccwaters]

The record to Chicago from Xiamen for me is 12 days, I've had 9 orders processed through there since my FT orders quit going through Shenzin. The longest one was the first, from acceptance to Chicago it was 18 days.

 

[EyesoreJr]

The record to Chicago from Xiamen for me is 12 days, I've had 9 orders processed through there since my FT orders quit going through Shenzin. The longest one was the first, from acceptance to Chicago it was 18 days.

DAMN! And I was hoping to get this before xmas. Acceptance for mine was 12-4-15 so only 4 business days.

 

[Roadtrip635]

DAMN! And I was hoping to get this before xmas. Acceptance for mine was 12-4-15 so only 4 business days.

I've been lucky with FT all of my orders have been 8-11 days. I've gotten lucky on things shipping sooner than expected as well. I ordered a RX200, wasn't supposed to ship until Dec.7th, shipped out on Dec.4th. Arrived in Chicago yesterday, so I should have it early next week.

 

[ccwaters]

Is always a chance, just depends, they wait until the shipping unit is full before it actually goes anywhere, if your package hits it right it could go faster. My all time record for a China package was 3 days to my door, very unusual, but pretty nice.

 

[EyesoreJr]

Is always a chance, just depends, they wait until the shipping unit is full before it actually goes anywhere, if your package hits it right it could go faster. My all time record for a China package was 3 days to my door, very unusual, but pretty nice.

I was kind of expecting some old guy in a row boat to be delivering it. Lol I was wondering if they did some kind of "unit" or "bin" thing that would make the shipping take longer.

 

[EyesoreJr]

Erl is the same inside diameter, so yes tanks will fit.

Forgot to ask if you notice a difference in the vape using the erl chimney vs the stock chimney?

 

[VaPreis]

Fasttech posted a black version today.