Since you're asking that makes me suspicious. Plus I know you like to talk about the batteries not handling 200W and that's just beating a dead horse but since you're dying to post it go ahead.
SXmini Q Class Powered by YiHi SX450 Chip Part 2
- Thread starter Hyperspace
- Start date
- th_trl_thread_readers 0
- Status
Since you're asking that makes me suspicious. Plus I know you like to talk about the batteries not handling 200W and that's just beating a dead horse but since you're dying to post it go ahead.
I think anything posted/emailed/PM'd/etc. directly from YiHi is perfectly acceptable to post in this thread, regardless of topic. What's not OK is to go on to discuss battery safety in response to anything YiHi has mentioned.
Your OP said no posting about battery safety.
I repeat my post: Without going into the questions asked of Yihi they are not about battery safety so valid info from Yihi is OK in this thread, right?
I said since you're dying to post it to go ahead and post it so this thread can get past whatever battery info you want to post.
I think you are adding drama that really doesn't add anything to this informational thread so let me just say:
I will tell you the questions I asked and you can tell me how it relates to battery info you say I'm dying to post.
Will the SX mini Q use the same SXi-Q software as the ML or will there be a different SXi-Q software for it?
Edit: Another off topic question I asked was if the new Pure atomizer will work on devices other than the ML and Q device?
You set me up for the drama. I can answer the question you posted, the answer is the Q will have different software. The second question I have no idea but a wild guess would be no.
It's not BS. Why would you need to ask permission to post YIHI info since you already did that in this thread without asking? People a free to post YIHI info is this thread. It's a thread about YIHI after all.
I will try to answer your question.
I only asked so I would be clear what could and could not be posted in your thread. Simple question I thought. I only asked after your response to a post. Lets review the posts:
MY POST:
YOUR RESPONSE:
AND THEN MY QUESTION:
Simple question, I thought, that only required a "Yes" or "No" answer.
Last edited:
You can quit playing innocent. It's clear what you were up to. This is my last post on the subject. I'm not to clog up this thread with debates on your motives.
Peace out
My final post on this:
MY MOTIVE is to gather information and discuss the soon to be released Q device (hopefully within your thread description) and have reached out to Yihi in search of that info also. I will be sending Yihi many more questions and will post the replies should they reply back.
I really think you should contact a moderator and have this thread cleaned of the clutter. I'm agreeable to them deleting any/all of my posts they feel like is clutter or to remove the drama. How about you?
nuff said.... olive branch extended....
MY MOTIVE is to gather information and discuss the soon to be released Q device (hopefully within your thread description) and have reached out to Yihi in search of that info also. I will be sending Yihi many more questions and will post the replies should they reply back.
I really think you should contact a moderator and have this thread cleaned of the clutter. I'm agreeable to them deleting any/all of my posts they feel like is clutter or to remove the drama. How about you?
nuff said.... olive branch extended....
sorry @retird , u can't blamed @Hyperspace accusing u of set-up. it's hard not to assumed the same thing will not popped out from u after reading all these.. 
SXmini Q Class Powered by YiHi SX450 chip
SXmini Q Class Powered by YiHi SX450 chip
SXmini Q Class Powered by YiHi SX450 Chip Part 2
SXmini Q Class Powered by YiHi SX450 chip
SXmini Q Class Powered by YiHi SX450 chip
SXmini Q Class Powered by YiHi SX450 Chip Part 2
This is a new thread separate from the other. Information was left in the other thread that was not available here. Thus I offered legitimate info here for those who will not see or read the other thread. Redundant information between threads? Yes Redundant information here? No.
Hey, if someone doesn't agree with a post that person can respond back.(attack the content of the post) That's what discussion is about. Attacking the poster is not, and is against ECF rules. Don't like the content of a post? Let's discuss it and refrain from personal attacks.... OK
Hey, if someone doesn't agree with a post that person can respond back.(attack the content of the post) That's what discussion is about. Attacking the poster is not, and is against ECF rules. Don't like the content of a post? Let's discuss it and refrain from personal attacks.... OK
Last edited:
huh?
i was only explaining y hyperspace would think u set him up. u can't blamed anyone thinking otherwise after by posting the same EXACT info thrice in two threads.
btw, i didn't expect u to take something as trivial as these personally. be chill!
Questions that have been asked of Yihi -SX Mini:
Questions about the SX Mini-Q and SX450 board:
1. Will the SX Mini-Q use the same SXi-Q software as the Mini-ML or will it be different?
2. Will the SX450 board use the same SXi-Q software as the SX Mini-Q device or will it use different software?
3. What is the resistance range of the atomizer where 200 watt vaping is possible?
4. Are there protections built into the SX450 board to prevent vaping at a higher wattage than the batteries will sustain?
5. Will Yihi be offering a video tutorial for the SXi-Q software?
6. What will be the Manufacturers Retail Price for the SX Mini-Q?
7. Will any firmware updates be the same for the SX Mini-Q and the SX450 board except for the start up screen?
8. What do you expect the release date to be for this device and board?
9. What will be the Manufacturers Retail Price of the SX450 board?
Question about the SX Pure atomizer:
1. What will be the Manufacturers Retail Price of the atomizer?
2. Does it use the same technology as the Altus atomizer?
3. Will it work on non-Yihi devices?
4. What will be the Manufacturers Retail Price of replacement heating element?
5. What is the ohm’s resistance of the heating element?
6. What is the recommended wattage range when used in power mode?
7. When do you expect the release date to be for this atomizer?
Never hurts to ask and understandable if not answered prior to release...
Questions about the SX Mini-Q and SX450 board:
1. Will the SX Mini-Q use the same SXi-Q software as the Mini-ML or will it be different?
2. Will the SX450 board use the same SXi-Q software as the SX Mini-Q device or will it use different software?
3. What is the resistance range of the atomizer where 200 watt vaping is possible?
4. Are there protections built into the SX450 board to prevent vaping at a higher wattage than the batteries will sustain?
5. Will Yihi be offering a video tutorial for the SXi-Q software?
6. What will be the Manufacturers Retail Price for the SX Mini-Q?
7. Will any firmware updates be the same for the SX Mini-Q and the SX450 board except for the start up screen?
8. What do you expect the release date to be for this device and board?
9. What will be the Manufacturers Retail Price of the SX450 board?
Question about the SX Pure atomizer:
1. What will be the Manufacturers Retail Price of the atomizer?
2. Does it use the same technology as the Altus atomizer?
3. Will it work on non-Yihi devices?
4. What will be the Manufacturers Retail Price of replacement heating element?
5. What is the ohm’s resistance of the heating element?
6. What is the recommended wattage range when used in power mode?
7. When do you expect the release date to be for this atomizer?
Never hurts to ask and understandable if not answered prior to release...
Questions that have been asked of Yihi -SX Mini:
Questions about the SX Mini-Q and SX450 board:
1. Will the SX Mini-Q use the same SXi-Q software as the Mini-ML or will it be different?
2. Will the SX450 board use the same SXi-Q software as the SX Mini-Q device or will it use different software?
3. What is the resistance range of the atomizer where 200 watt vaping is possible?
4. Are there protections built into the SX450 board to prevent vaping at a higher wattage than the batteries will sustain?
5. Will Yihi be offering a video tutorial for the SXi-Q software?
6. What will be the Manufacturers Retail Price for the SX Mini-Q?
7. Will any firmware updates be the same for the SX Mini-Q and the SX450 board except for the start up screen?
8. What do you expect the release date to be for this device and board?
9. What will be the Manufacturers Retail Price of the SX450 board?
Question about the SX Pure atomizer:
1. What will be the Manufacturers Retail Price of the atomizer?
2. Does it use the same technology as the Altus atomizer?
3. Will it work on non-Yihi devices?
4. What will be the Manufacturers Retail Price of replacement heating element?
5. What is the ohm’s resistance of the heating element?
6. What is the recommended wattage range when used in power mode?
7. When do you expect the release date to be for this atomizer?
Never hurts to ask and understandable if not answered prior to release...
YIHI seems to like being tight lipped until their products come out, so I wouldn't expect most those questions to be answered until then.
Yep, kinda what I'm thinkin'.... but they may put out a few bits and bobbles along the way to keep the hype going....
Anybody know when Pbusardo is going to China? He said he was going to visit the Yihi factory while there...and I think he said he was going to take his dead ML so they can have it to troubleshoot it to see why it failed... and he may get a peek at the SX Mini-Q
Anybody know when Pbusardo is going to China? He said he was going to visit the Yihi factory while there...and I think he said he was going to take his dead ML so they can have it to troubleshoot it to see why it failed... and he may get a peek at the SX Mini-Q
Last edited:
He arrived in China yesterday.Yep, kinda what I'm thinkin'.... but they may put out a few bits and bobbles along the way to keep the hype going....
Anybody know when Pbusardo is going to China? He said he was going to visit the Yihi factory while there...and I think he said he was going to take his dead ML so they can have it to troubleshoot it to see why it failed... and he may get a peak at the SX Mini-Q
Last edited:
- Status
