T3 Flooding

[Kari2000]

My mini t3 keeps flooding. I can use it for an hour or so and then it starts to spit juice in my mouth and floods. It worked fine for a week before this started. How do I fix it?

 

[Kari2000]

Bump.........

 

[spider362]

Try replacing the silica wicks with cotton cheesecloth wicks.

I've replaced all my T3's and Mini T3's (which use the same head) with cotton and don't have any leaking or sputtering. The only thing you have to be careful about is if you take too many draws over a short period of time you can get a dry hit, so give it time to resaturate the wick.

Also, don't dry burn with the cotton wick in place. When you do a dry burn pull out the wick, dry burn, then replace it with a new one.

Information on how to make a cotton cheesecloth wick is here: http://www.e-cigarette-forum.com/forum/clearomizers/385799-how-i-re-wick-my-t3s-cheesecloth-pictues.html

 

[JeremyR]

Top seal could be bad making the tank not hold pressure. Fill tank, you can use water if you want, blow out tube, then blow through it hard and see if water still comes out, if so I have a fix for that..

 

[vdrummer]

Could just be a condensation build up inside the tube which then drips down to the coil, or when vaping spits into your mouth. Noticed it happening for I vape outside when it is cold, and damp.