Taifun GT Discusion!

[chanelvaps]

another place and it shows where I bought the 20's. Guess I did not buy the 19's which is what I think you need
Order Information : The O-Ring Store LLC, We make getting O-Rings easy!
at this place you can buy a smaller quantity. At the other a bag of 50 is what you get

 

[clnire]

AH!!! got it now! Thanks chanel!!!

 

[chanelvaps]

sending you some 20's tomorrow

 

[dwcraig1]

Normally I do dual coils in this but this being 2.5 mm ID and Ni200 I have to settle for one or else use 30 gauge wire, other wise the resistance would be too low for the mod. This one is 28 gauge ni200 with 26 gauge ni200 legs crimped on. The center air hole is plugged.

40 to 60 watts no problem

 

[Phone Guy]

Normally I do dual coils in this but this being 2.5 mm ID and Ni200 I have to settle for one or else use 30 gauge wire, other wise the resistance would be too low for the mod. This one is 28 gauge ni200 with 26 gauge ni200 legs crimped on. The center air hole is plugged.

40 to 60 watts no problem

What is that? The dripper? Or the gs2?

 

[dwcraig1]

What is that? The dripper? Or the gs2?

That is the base of a type A TGT from FT, the one with the nickel plated brass deck that they replaced with a SS one for the early complainers. Attached is a clone by Hotcig of "the Dripper". I have the authentic one also but on this one I made the air holes bigger.
So TGT 1 with dripper attachment

 

[chanelvaps]

Does anybody have handy the pic that shows the sizes of the orings and where they belong? TGT2

 

[clnire]

OOps, it is in there! With pictures too, of where they go. I really do pay attention, honest!

A1 Base
A2 3 x 0,5 x 9mm PTFE-sleeve (air channel reduction)
A3 11x1 mm o-ring
A4 17x1,5 mm o-ring
A5 17x1 mm o-ring
A6 Spring
A7 Countersunk screw M2 x 8mm
A8 Screw M2x14mm (minus)
A9 Screw M2x20mm (plus)
A10 AFC Ring
A11 Chamber sleeve
A12 Chamber cap
A13 11x1 mm o-ring
B1 Tank cover
B2 20x1 mm o-ring
B3 Glass insert
B4 4x1 mm o-ring
B5 Topcap
B6 19x1 mm o-ring
B7 Drip tip
B8 5x1,5 mm o-ring
B9 5x1,5 mm o-ring

 

[dwcraig1]

OOps, it is in there! With pictures too, of where they go. I really do pay attention, honest!

A1 Base
A2 3 x 0,5 x 9mm PTFE-sleeve (air channel reduction)
A3 11x1 mm o-ring
A4 17x1,5 mm o-ring
A5 17x1 mm o-ring
A6 Spring
A7 Countersunk screw M2 x 8mm
A8 Screw M2x14mm (minus)
A9 Screw M2x20mm (plus)
A10 AFC Ring
A11 Chamber sleeve
A12 Chamber cap
A13 11x1 mm o-ring
B1 Tank cover
B2 20x1 mm o-ring
B3 Glass insert
B4 4x1 mm o-ring
B5 Topcap
B6 19x1 mm o-ring
B7 Drip tip
B8 5x1,5 mm o-ring
B9 5x1,5 mm o-ring

So lets put the manual's link here too.
http://www.smokerstore.de/WebRoot/Store11/Shops/61925514/MediaGallery/TGT2_Manual_HiRes_Final_E.pdf

 

[Alien Traveler]

Hi Guys, I am looking to try the TGT for the first time but I don't know which is which. My norm is to get a clone for the first and then if it is superior for me, to consider an authentic or 3.

But, what is the newest of the series? I like a rebuildable TA with a 4.5ml tank or more. Can someone send me a link or FT item number?

Thank-you.

Edit: Is the GS just a clearish tank for the GT2?

I have this one (Hotcig clone) and I like it:
$20.02 HOTCIG GT-T V2 RTA Rebuildable Tank Atomizer (5.0mL) - stainless steel + matte glass / 23mm diameter at FastTech - Worldwide Free Shipping

 

[TheotherSteveS]

I have this one (Hotcig clone) and I like it:
$20.02 HOTCIG GT-T V2 RTA Rebuildable Tank Atomizer (5.0mL) - stainless steel + matte glass / 23mm diameter at FastTech - Worldwide Free Shipping

me too. It is one of the best clones I have ever seen, at least in terms of the build quality/macining etc. Excellent!

 

[chanelvaps]

Well I tried to replace the chamber and chamber cap o-rings and on my TGT2. Manual says 11x1. Those did not work. wonder if it is different for clones

 

[Shawn Hoefer]

Picked up a Taifun GS today at a local B&M to go with my Taifun GT. Should I pop for a GT2?

 

[chanelvaps]

Picked up a Taifun GS today at a local B&M to go with my Taifun GT. Should I pop for a GT2?

but of course!

 

[Shawn Hoefer]

but of course!

I'll consider that a prescription... something I HAVE to get...

That and the Squape R...

And the Flash E-Vapor...

 

[chanelvaps]

and the Vaporshark rDNA...

 

[dwcraig1]

Well I tried to replace the chamber and chamber cap o-rings and on my TGT2. Manual says 11x1. Those did not work. wonder if it is different for clones

Did they seem too large or too small?

 

[Frenchfry1942]

Jeez, I ended up ordering 3 different RTAs. Took me awhile doing all the readings.

Thanks all.

 

[chanelvaps]

Did they seem too large or too small?

large

 

[dwcraig1]

large

11 x 1 mm is pretty much what I use in those locations. Care needs to be taken that the o-ring isn't twisted when rolled on. I get under them with a safety pin pin and pull outward and go around the grove to untwist it if it did get twisted. And I'll just mention that they need lubed with juice.
And then again maybe it's just too big, how do the 10's fit? 10.5 x 1 mm is available.