and SS refers to stainless steel. like those in this link Which also means instead of the two delrin caps for the tank, the caps are made of stainless steel.
No matter what, you will be limited with most VV mods to whatever amperage the switch is programmed to. Provari and LavaTube, for example, are 2.5amps. So regardless of the resistance of a dual coil carto, the VV at 2.5 amps will likely not be enough. You need an unregulated mod (various battery combos can yield 3.7-4.2, 5, 6-6.4, 7.2-8.4 volts, etc) to get the most out of those or a regulated 5, 6, or higher volt mod. For example, for most people, 2.5a x 1.6o = 4 volts plus or minus .2 volts is not usually enough. Same with 2 or 2.5 ohm DC cartos, limit would be 5 Volts and 6.25 Volts which may not be enough. Most makers of VV with limiting switch mods do not recommend the DC cartos for this reason. VV are much better with single coil cartos in the range of 2.8-3.2 ohms. Smoketech now sells those in a size that will fit their tanks.I want to try tanks but I have a variable voltage PV and low resistance cartomizers are not ideal. Hope you will carry 2.5 or 3.0 ohm cartos in the future.
And yes please stock the SS. Will pick those up for sure.
lol sheng welcome.
Also i forgot to add that cabin can also sell cartomiser puncher. this is to allow users to dot the cartomiser themselves. either that or cabin will have to sell pre-dotted cartomiser replacement.
I use dotted instead of punch cuz the cabin website says dotted and i dun wanna confuse sunshine regarding that.
HC,
When are you going to start selling SmokTech DC Tank and it's accessories?
I have used my current 3.5ml DCT 1.5 omh on my Provari.
Result?... It's like a BMW 7 Series... Drinking e-Liquid.
I need a 6ml tank and the cartomizers.
You can't just sell a set of the SmokTech DCT and expect it to last a lifetime right?
Anyway I would also like to take this time to wish the staffs @ Health Cabin a Happy Chinese New Year...![]()
Thank you for your asking.
We do sell 510DCT MOD (6ml) now.
We expect to stock DCT Tube and cartomizers replacements separately in Feb.![]()
...
and you think that will work with the tank
5pc 0.9ml Boge 510D XL Soft Cap Empty Cartomizer
Tube size:Length 40mm;Diameter 9.2mm
5pc 0.9ml Boge 510D XL Soft Cap Empty Cartomizer(2 colors) [Boge 510 D XL] - $4.80 : Healthcabin Electronic Cigarettes - Wholesale and Retail--
No they won't. I described the problem in this thread, post 9:http://www.e-cigarette-forum.com/forum/healthcabin/245579-new-arrival-1-2ml-boge-510d-xl-soft-cap-empty-cartomizer.htmlYes, those will work. I have some cartos that are 45mm long and they are about two mm taller than the carto tank. Those cartos won't be flush with the top cap, but they will still be long enough to be inside the top cap of the tank.
anyone knows if there's a way to fit the CE2 from a clearomizer into this tank?
No can do as the diameter of a CE2 cannot fit through into the cap.
Put it to easier terms, CE2 tube is slightly thicker than a normal cartomizer.