Just purchased my Atlas and my serial# is 019 did I purchase a refurbished instead of new?
Tatroes 50w atlas box mod: any owners out there
- Thread starter Cob24
- Start date
- th_trl_thread_readers 0
- Status
Wow two of them huh? Do you know if they did the 60watt update to the new atlases? I sent them an email asking if the box had the correct wiring to support it but haven't gotten a response yet
I know from reddit that they are selling any refurbs as blemish models for a discounted price. Might have only been in store available though
You should be able to upgrade the software to 60 watts. Download-yihiecigar,sx350,Yihi SX350,dna30 30W chip,SX350 35W chip Manufacturers & Suppliers - Dongguan Yihi Electronic Co.,Limited
Need to download #1 and #3. 3 is a program you use to do the upgrade. 1 is the new software. Just take the battery out of the mod plug it into your computer do a connect then do the upgrade. May have to install a driver for your computer.
Need to download #1 and #3. 3 is a program you use to do the upgrade. 1 is the new software. Just take the battery out of the mod plug it into your computer do a connect then do the upgrade. May have to install a driver for your computer.
But is the mod itself built to the specs that yihi says are required for the update?
may want to ask cigtechs.
I saw the wiring in the pbusardo video and it looked like 20g for the load out and 22g for the batt. Not positive though but I'm pretty confident.
That would mean it's not something yihi wants upgraded. I was worried about that. I don't need 60 watts either way as I've never gone over 36. There was a other update though that they pushed out.
What did Phil think if the atlas? I can't watch his reviews. They're too long
What did Phil think if the atlas? I can't watch his reviews. They're too long
He loved it!!
His usual nit picky gripes though.
He wanted more venting
an alen wrench provided in the box
gravity sensor upgrade that will allow faster watt increase/decrease instead of the slow build to hyper speed
He still loved it though and recommended it.
Mine should be shipped soon. Just ordered the Blue one!
They're shipping the Allen wrench with it now so you're good on that front. I want more venting myself. I can't complain about the gravity thing personally. I prefer it being slower. When I'm adjusting it I make tiny adjustments and if it sped through it it'd be a real pita for me. I've had mine since the first batch shipped (the bad battery batch) and it's my main mod.
I tried something different today. I typically build around .7 on my magma and vape that around 32 watts.
I decided I'd try a higher ohm coil and just jack up the volts to get to my watts. Atlas got a little warm. Not sure if it was because I was holding it, my battery needed to charge or the voltage increase made it warm up or what. It's on the charger now so I'll continue with my test
I tried something different today. I typically build around .7 on my magma and vape that around 32 watts.
I decided I'd try a higher ohm coil and just jack up the volts to get to my watts. Atlas got a little warm. Not sure if it was because I was holding it, my battery needed to charge or the voltage increase made it warm up or what. It's on the charger now so I'll continue with my test
Yup, mine came with an allen key. It was packed in with the USB charging cable. I'm vaping it right now 42 watts 0.4 ohms with an Infinite CLT and didn't notice the mod getting any warmer. The vape itself is hot as hell, though. I tried it at 50 watts with no problems although I started getting some dry hits so I backed it down a bit. Haven't tried that wattage with a higher ohm coil. I don't think it would be an enjoyable vape for me. 42 watts is already pretty crazy at 0.4.
What Guage do you think the load out and the battery to board wires are. 18, 20, 22g???
From pbusardos video they looked to be maybe 20 and 22g. Tough to tell but figured you owners may have a better idea. I want to eventually do the 60 watt upgrade when I get mine but don't want to fry anything.
From pbusardos video they looked to be maybe 20 and 22g. Tough to tell but figured you owners may have a better idea. I want to eventually do the 60 watt upgrade when I get mine but don't want to fry anything.
Ticket status: New
Just got this from tatroes:
Department: General
Subject: wiring on atlas 50 watt mod
hi Steve the chips are wired for 50watt max at the moment. the factory has not changed the wires to 16 gauge yet which will allow 60 watts or more.
Sincerely,
Tatroe Mods
Just got this from tatroes:
Department: General
Subject: wiring on atlas 50 watt mod
hi Steve the chips are wired for 50watt max at the moment. the factory has not changed the wires to 16 gauge yet which will allow 60 watts or more.
Sincerely,
Tatroe Mods
I don't have an Atlas, but I do have a mod with an SX350 board in it. I was wondering if you can change the watts from the firing screen without going into the menu. I couldn't do that with my SX350 until I added the +/- switches. Is the atlas able to do that? Just wondering if they have custom firmware. Also, is the USB interface/upgrade working? Can it upgrade?
Anytime I find something I like, I always seem to end up with at least two! Lol! ProVape got my money 5x, but I think I'll settle for 2 Atlas boxes
Back when I had a provari I kept eyeing the website put a second one in my cart at least 20 times.
I love my atlas, it's my main mod. I have a ranger on order though which may give the atlas a serious run for it's money.
I love my atlas, it's my main mod. I have a ranger on order though which may give the atlas a serious run for it's money.
Wow!
This mod needs alot more attention on these forums than it's getting. I'm pretty blown away with this thing. I went a little or of control and got the Atlas along with the rdna. Both are great devices but the Atlas is a monster and the sx350 board performs wonderfully. 30 watts on the Atlas is completely different from the max 30 on the rdna. Just a heavier vape with the same atty and build with the Atlas! The gravity sensor works flawlessly. I love my mechs but the Atlas may have pushed them to the back shelf for a while.
This mod needs alot more attention on these forums than it's getting. I'm pretty blown away with this thing. I went a little or of control and got the Atlas along with the rdna. Both are great devices but the Atlas is a monster and the sx350 board performs wonderfully. 30 watts on the Atlas is completely different from the max 30 on the rdna. Just a heavier vape with the same atty and build with the Atlas! The gravity sensor works flawlessly. I love my mechs but the Atlas may have pushed them to the back shelf for a while.
The gravity sensor works, but it is no bueno with a filled Magma or any other RDA that leaks out the air holes when you tilt them to one side.
I use a magma on mine and typically make a mess without ever adjusting the watts
- Status
Similar threads
