The FastTech Thread for All FastTech Posts (Part 2)

Status
Not open for further replies.

jonny45378

Super Member
ECF Veteran
Feb 4, 2014
347
268
Arizona
Mech mods do not have batteries in them, But the batteries that you PUT in them are prohibited from that shipping option. For cylindrical batteries I think you have to use Malissia post, but not sure on that as I order mine stateside.

Vape On
Burnie
:vapor:

Ok thanks a lot. I was worried that I wouldn't be able to order a mech mod from them. Thanks again!

Sent from my myTouch_4G_Slide using Tapatalk 2
 

Tajji'smom

Super Member
ECF Veteran
Dec 31, 2012
489
922
Southern Ontario
I bought a 1100 mAh EGoCTwist from fastech - $11.78 EGO-C Twist "1100mAh" Variable Voltage Rechargeable Battery for E-Cigarette - silver / 930~950mAh actual capacity at FastTech - Worldwide Free Shipping
But it turned out Dead on Arrival.

I am getting a replacement from them but I was wondering what experience people have had with egoctwist from fasttech. I have another egoctwist bought elsewhere it's pretty good. Are they any alternatives I should consider which are in a similar price range?

I found this - Vision Spinner - $12.82 Vision Spinner Style 1100mAh Variable Voltage Battery - 3.3-4.8V at FastTech - Worldwide Free Shipping. It seems to be almost the same as the egoctwist - anyone used this.

I have a 1300 mah Vision Spinner and love it. Same as Twist. I wish FT had gotten these in a couple of weeks ago. I would have gotten another on instead the evods. They cost 24$ here
 

Poet

Senior Member
ECF Veteran
Verified Member
Nov 23, 2013
105
149
New England
www.cotse.net
China post is starting to tick me off. I have received two packages finally, but I have 4 packages that have been stuck at the 'origin is preparing shipment' for 6 days now. The other two packages were here week after that status first showed up, but these? Who knows when they'll show up or what's happening with them. They should have arrived in the US by now.

My order was placed Jan 14th, shipped Jan 20th, arrived in Malaysia Jan 29th, left there feb 2nd, arrived ISC New York Feb 10th. It still shows as there and I have yet to see it. Looks like it is MIA. :(
 

JohnDaddyo

Super Member
ECF Veteran
Dec 6, 2013
312
245
73
Tampa Bay
"Please pay special attention to the length of time every single order takes to arrive with you as I know you guys love to chat about that "
I'm thinking since you started this thread it's obviously YOU who loves to "chat"
Is this supposed to be a bash FT thread? I'm sure given the size of this company and the fact that it is available to almost 6 Billion people, there is bound to be a couple of issues? LOL To complain about slow delivery is sort of, forgive me, silly. I mean we're ordering from CHINA and using their FREE Shipping option! HELLLOOO?? :laugh::D Free shipping can take as long as 30 days. Obviously, if you're 1 of the 6 BILLION, you might have had a horror story??
I don't know, maybe I'm feeling extra sensitive today (male menopause?) but it seems the OP tried to seperate himself from the crowd. As if this is a favor to us? Here ya go mate, feel free to CHAT about FastTech!
OK, I feel a little better now.:blush:
 

graybeard

Senior Member
ECF Veteran
Oct 20, 2013
278
1,215
Gaffney SC
China post is starting to tick me off. I have received two packages finally, but I have 4 packages that have been stuck at the 'origin is preparing shipment' for 6 days now. The other two packages were here week after that status first showed up, but these? Who knows when they'll show up or what's happening with them. They should have arrived in the US by now.

My recent experience exactly. Love Fasttech prices. Hate Halffast shipping.
 

powerband

Ultra Member
ECF Veteran
Feb 9, 2014
1,129
9,894
Arizona
didn't pay for expediting on my order. placed on the 22nd, shipping order became active on the 27th, second update last night. I am really happy about that!
Like you said Johndaddyo they are shipping from china and they gotta have so much mail outbound that its silly!
was telling my son that if I see it by March 15th I will be overly impressed!
so far its moving better than expected! ha ha!
 

crxess

Grumpy Ole Man
ECF Veteran
Verified Member
Sep 20, 2012
24,438
46,126
72
Williamsport Md
Someone just has no luck.
Not me though. All my orders seem to get out of there quickly.
First - I allow time for any special items to actually be fulfilled without getting worked up.
Second, I never count those days as part of the shipping process.

Once a package is marked Shipped(Package Picture included) I start the clock.
I always allow 3-4 weeks for Delivery as - China can happen.:facepalm:
So Far all my orders have arrived within 10-12 Days of HKP showing them Scanned.
Normally HKP is 24-36 hours behind Packaging and I expect this.

My Last order, now in transit, Was marked
Shipped on 2/25
Accepted at HKP 2/26
Passed through customs and waiting on transport 2/27
Cleared China and is in limbo - Likely SF customs 2/28
Should be in my hands on the East Coast by Wednesday and if not - USPS fault as usual.

Now, I did place the order on 2/9, but knew full well 3 pieces were out of stock and one not due until 2/25 so as far as I am concerned they met and exceeded their goal in fulfilling my order.....once again.:D
 
Last edited:

powerband

Ultra Member
ECF Veteran
Feb 9, 2014
1,129
9,894
Arizona
Someone just has no luck.
Not me though. All my order seem to get out of there quickly.
First - I allow time for any special items to actually be fulfilled without getting worked up.
Second, I never count those days as part of the shipping process.

Once a package is marked Shipped(Package Picture included) I start the clock.
I always allow 3-4 weeks for Delivery as - China can happen.:facepalm:
So Far all my orders have arrived within 10-12 Days of HKP showing them Scanned.
Normally HKP is 24-36 hours behind Packaging and I expect this.

My Last order, now in transit, Was marked
Shipped on 2/25
Accepted at HKP 2/26
Passed through customs and waiting on transport 2/27

Cleared China and is in limbo - Likely SF customs 2/28
Should be in my hands on the East Coast by Wednesday and if not - USPS fault as usual.

Now, I did place the order on 2/9, but knew full well 3 pieces were out of stock and one not due until 2/25 so as far as I am concerned they met and exceeded their goal in fulfilling my order.....once again.:D

My order said the same... must be traveling together. dang, may be here sooner than expected! Nice
 

Korzik

Full Member
Verified Member
Jan 10, 2014
46
46
Chicagoland, IN, USA
My very first order with Fasttech was placed on Friday, Feb 07, 2014

My experience so far:
FT showed shipped on 02/19
USPS Tracking shows acceptance notice in China on 02/21
Processed Through Sort Facility on 02/22

And it is currently showing "Origin Post is Preparing Shipment" still as of today.

This packing is mean to be my birthday gift on 04/01. Just hoping it gets here by then. (don't even ask about my second order placed on 02/09, they still don't even have the items)

((date format Month/Day))
 

WarHawk-AVG

Vaping Master
ECF Veteran
Jul 27, 2013
3,370
4,398
H-Town
flashlight mail!

Order Placed: Friday, February 07, 2014 // Delivered: Friday, February 28, 2014
LN*********CN

1* AA/AAA 5-Mode 550mA Linear Booster LED Flashlight Driver Circuit
0.9V~1.5V: 5-Mode / SKU: 1134800
QTY 2

Cree XP-G R5 345LM 6700K LED Emitter with 14mm Base
Cree XP-G R5 345LM 6700K LED Emitter with 14mm Base
R5, 345LM, 6700K, 14mm Base / SKU: 1103601
QTY 2

Cree XT-E R5-4B 496LM 4500-4800K LED Emitter
Cree XT-E R5-4B 496LM 4500-4800K LED Emitter
R5-4B, 14mm / SKU: 1581103
QTY 2

Ultrafire Nylon Flashlight Holster (Black)
Ultrafire Nylon Flashlight Holster (Black)
10*3.5*3cm, Black / SKU: 1411401
QTY 2
(darnint...about 1/2" to 3/4" too short to hold a Convoy S5...drat!)

Stainless Steel Clip Attachment Add-on
Stainless Steel Clip Attachment Add-on
Silver / SKU: 1281100
QTY 2

I messed up and ordered them on 14mm bases not 16mm bases...uggh

Time to start playing with some of my Sipik SK68's and stuff...
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread