The FastTech Thread for All FastTech Posts (Part 2)

[volume control]

Was looking for something light to carry this summer. Picked up an Evod Glass and Spinner 650 for cheap. The glass is a dual coil, so to rebuild i used a 5/64 bit, 28ga, 8 wrap for 1.3ohm with some cotton. That way there was enough cotton to fill the entire juice channel on both sides. Love that i can use a shorty drip tip

 

[zero7starz]

I used this for my last order. Arrived in eleven days.

Take the usps free option and let them decide the best way to ship. That's all Ive used for a year and no problems. If you have batteries{18650} it will have to go through Malaysia, if juice or internal batteries like ego it will go through Singapore. Figure 3 weeks and at least 10 days before tracking available.

Done and done. Hoping I will also be lucky enough to receive it in eleven days. Not really in a rush, except that I am impatient. It was just a bunch of accessories, really, things I could wait for that I didn't want to pay premium for to order from the US.

 

[cindycated]

I'd be tempted if they had a mod that would transform into something else and I'm 51.

Yeah, like a racecar or semi rig!

 

[Minnaz]

$26.32 Maraxus Telescopic Mechanical Mod - eight vent holes / floating 510 center pin at FastTech - Worldwide Free Shipping

^^^ this ^^^ but watch twisted420 review of the clone he has (I believe its the EHpro one... and u should get that one n I think he says in the vid its like $40 so not much more expensive and its a quality clone...


I was going to order this from FT but didnt want to be disappointed so im looking for someone who will ship the EHpro one to aus

Sent via Vape Signal

 

[Lazythekidd]

hi guys my birthdays comeing up and the other half has offered to buy me a mech as I told her I wanted one but im lost on what to get lol. ive norrowed it down to maybe these but wondered what you guys think or any other I might of missed. I like nemesis but its something everyone has and ill get it down the line I think, I like the look of the maraxus but think the thing might feel weird and get sick of the look down the which leaves the orochi which looks great but doesnt have any reveiws. if only she said she would get me 3 or maybe 4 lol.

$22.92 Bellwether Style Mechanical Mod - 18350/18650 / stainless steel + brass at FastTech - Worldwide Free Shipping
$26.32 Maraxus Telescopic Mechanical Mod - eight vent holes / floating 510 center pin at FastTech - Worldwide Free Shipping
$24.63 Nemesis Style Mechanical Mod - stainless steel / with telescopic 510 contact pin at FastTech - Worldwide Free Shipping

Go with the copper nemesis or panzer

C.R.E.A.M Custard Rules Everything Around Me

 

[boborone]

^^^ this ^^^ but watch twisted420 review of the clone he has (I believe its the EHpro one... and u should get that one n I think he says in the vid its like $40 so not much more expensive and its a quality clone...


I was going to order this from FT but didnt want to be disappointed so im looking for someone who will ship the EHpro one to aus

Sent via Vape Signal

My buddy has it and nothing to be disappointed about. Floating top pin, telescopic, good finish. Just a beast of a paper weight. Thing is huge.

 

[boborone]

Speaking of the Maraxus. Anymore notice this came in today?

http://www.fasttech.com/p/1709602

A silver Maraxus with wth engraving.

 

[Minnaz]

Speaking of the Maraxus. Anymore notice this came in today?

http://www.fasttech.com/p/1709602

A silver Maraxus with wth engraving.

Also did you see the all gold one that was put up yesterday?

Sent via Vape Signal

 

[KurrptSenate]

really into FT carrying all these glass drip tips. I'll have to order a bunch next time

 

[jp_cfc09]

lol any you guys see these drip tips, id laugh like crazy if i seen anyone walk past vapeing on one of these.

$20.87 Couple Style Brass 510 Drip Tips (6-Pack) 6-pack at FastTech - Worldwide Free Shipping

 

[HughDaHand]

lol any you guys see these drip tips, id laugh like crazy if i seen anyone walk past vapeing on one of these.

$20.87 Couple Style Brass 510 Drip Tips (6-Pack) 6-pack at FastTech - Worldwide Free Shipping

I almost want to get one just to see peoples reactions to it. Depending on what they say I could always switch over to one of the middle finger drip tips they sell.

 

[jp_cfc09]

I almost want to get one just to see peoples reactions to it. Depending on what they say I could always switch over to one of the middle finger drip tips they sell.

I have one of the middle finger drip tips lol, glow in the dark too. I use it in the house at night so I can spot it but once I took it out for a laugh and make a few people smile lol.

 

[Burnie]

Well it has been a while since my last order, so I popped for a small one, $20.15. Only thing I hate is the calipers have a button battery and it has to come by Singapore post, which from past orders is 3+ weeks. All are in stock, so no wait there at least.

$11.94 Digital 150mm (6-inch) Caliper
$7.24 Stainless Steel Round Mouth Drip Tips for 510 / ViVi Nova / DCT 5-pack
$0.97 Acrylic Round Mouth Drip Tip for 510 / ViVi Nova / DCT

Vape On
Burnie

 

[realsis]

I just ordered a kraken genius rba clone. This is the first fast tech for 16.17. $. Today is the 16.of may. I hope it comes soon!!

 

[Myk]

My Vamo V3 came, no update since Chicago.
It works. Different chip than my old V3. Pin is a lot higher, almost too high to screw the beauty ring up to meet the atty.
Broke my AGA-TD ceramic wicks trying to get the cap off (eGo rings haven't showed up and didn't want to put too much pressure on the Vamo without one so I twisted).

Not much to play with since I already have a V2 and V3, just getting it was the challenge.

I just ordered a kraken genius rba clone. This is the first fast tech for 16.17. $. Today is the 16.of may. I hope it comes soon!!

I'm not sure if you got the one with a plug or how adept you are at gennies.
What I had to do to mine that had a plug and both wicks tapped was drill out the threads in the wick I wanted to use (dual gennies are a PITA if you want to use mesh, if you plan on dual I suggest ceramic wicks). Then I opened up the fill hole to take a RSST plug (it's too big for a standard carto .... plug like my Pulse takes). Then I took some diameter off the washers. My deck screws are also tapered and there's no way to trap wire so I had to make/find a washer for it.
Works pretty good now.

If you lay it down as a dual, especially with the fill hole not plugged it will almost instantly drain.

 

[anavidfan]

Hello, Ive ordered a few things in the past from Fastech, never a complaint. I have a little Fatty V2 dripper and it has met my needs for a long time. I recently got some great NETs and I feel the need for more little drippers. I know many of you all collect drippers and wondered if all the items there are clones or if the 1 x IGO-W I ordered is the actual IGO. I also got one of these :1 x Helio Rebuildable Dripping Atomizer 1.2O. I know the Helio is a clone. I needed a couple 20mm , simple drippers for these great tobaccos. NETs get atties so dirty, really , really fast. I wanted another Fatty, but at 85.00 for such simple ( but really well made) little RDA was something I could not swing right now.

ANy suggestions on low cost little 20mm drippers on the Fastech menu to recommend? It has to be simple , I have stupid messed up hands that make building elaborate coils and wicks a no go. Silly thing is, I have a 160.00 dripper in a nice wooden box that goes un-used as its too hard for me to build and requires dual coils that I just cant get right.

 

[AmandaD]

Hello, Ive ordered a few things in the past from Fastech, never a complaint. I have a little Fatty V2 dripper and it has met my needs for a long time. I recently got some great NETs and I feel the need for more little drippers. I know many of you all collect drippers and wondered if all the items there are clones or if the 1 x IGO-W I ordered is the actual IGO. I also got one of these :1 x Helio Rebuildable Dripping Atomizer 1.2O. I know the Helio is a clone. I needed a couple 20mm , simple drippers for these great tobaccos. NETs get atties so dirty, really , really fast. I wanted another Fatty, but at 85.00 for such simple ( but really well made) little RDA was something I could not swing right now.

ANy suggestions on low cost little 20mm drippers on the Fastech menu to recommend? It has to be simple , I have stupid messed up hands that make building elaborate coils and wicks a no go. Silly thing is, I have a 160.00 dripper in a nice wooden box that goes un-used as its too hard for me to build and requires dual coils that I just cant get right.

The little IGO-L is a great single coil dripper - at just over $7 you can buy several

 

[anavidfan]

I got the IGO-W, from FastTech, so is it genuine? how does the L compare to the W?

 

[NatureBoy]

I'm not a fan of the IGO-L. No matter what build I've tried in that thing, it just doesn't produce nearly as much vapor or flavour as my other drippers.

 

[Myk]

I'm not a fan of the IGO-L. No matter what build I've tried in that thing, it just doesn't produce nearly as much vapor or flavour as my other drippers.

FT IGO-L so the plated brass posts were easily drilled out for ribbon. Air hole opened (but am working on closing it because 1/16" I had it opened to poured too easily, probably end up with 1.5mm).

1.6Ω .5x.1 ribbon with 1mm-1.5mm(haven't tried that yet but it should be a better fit with less fussing to make sure it expands) Ekowool. That does pretty good with an anemic eVic in the mid 3V's. Tried a 2Ω coil in it and didn't like it as much so I went to...

2 strand twisted ribbon same as above for 1.6Ω-1.7Ω, same Ekowool as above. Oh my.

I've got an Immortalizer clone from the local. Not known for clouds. It does pretty good with similar builds as above too. Even my gennies with 2Ω touching coils with the same ribbon produce pretty good clouds.