The FastTech Thread for All FastTech Posts (Part 2)

[ceeceeisme]

Have you heard anything yet?

Yup - took 3 days for them to get back to me but I wasn't sweating it. They sent the wrong size glass replacements for my tanks but it was no problem - gave me a credit right away. Actually, they offered a refund but I told them just to put it on a gift certificate because, you know..... I'll be shopping during the next sale
(even though I said I wouldn't)

 

[JustWondering1]

Package 1 of 2 came for order 1! Ordered on 3/18

What did u get in the first package?

 

[leftyandsparky]

kayfun lite bell cap kit, kayfun screws, nectar Pom tanks, cotton

 

[3mg Meniere]

Kayfun lite bell cap kit

What color? I am expecting a package on Monday. A purple green fuschia, blue, and yellow. Record time, if you must know.

 

[leftyandsparky]

Clear

 

[3mg Meniere]

Clear

Really? I couldn't find that. It had been on a seven day wait for ages, then it was marked discontinued.

 

[leftyandsparky]

Really? I couldn't find that. It had been on a seven day wait for ages, then it was marked discontinued.

$1.50 Free Shipping Replacement PC Bell Cap Set for Kayfun Lite Five Pawns (Bell Cap Set (Kayfun Lite Five Pawns), Translucent) at m.FastTech.com
Just looked at my email and link and this is what I got

 

[3mg Meniere]

Yup. Is now discontinued. You must have gotten the last.

 

[leftyandsparky]

Yup. Is now discontinued. You must have gotten the last.

But at least you have colored ones!

 

[3mg Meniere]

But at least you have colored ones!

I wouldn't have found them if the clear ones weren't gone. Strange that they didn't have them referenced under similar items. Must be different companies.

 

[leftyandsparky]

I wouldn't have found them if the clear ones weren't gone. Strange that they didn't have them referenced under similar items. Must be different companies.

Idk, I just used the link someone shared in the Stocking up thread.

 

[JCinFLA]

Some of you may want to get the acrylic bell caps separately (that don't have the plastic chimney barrel part), and some of the metal chimney barrels. You don't have to worry about the heat getting to the plastic barrel then.

I've bought multiples of these below from FT and they work great with no problems. Also, these bell caps will accept any 510 drip tips. I found out the hard way (after ordering 2 lots of 5 other ones that were first recommended on another thread)...that they were tapered inside the sticking up plastic drip tip part on it...and as a result, they wouldn't take any drip tips except the squishy silicone ones that would then pop off too easily.

$5.02 Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (5-Pack) 5-pack at FastTech - Worldwide Free Shipping - Clear ones in a 5 pack, but they have them singly as well as in colors, too. Just make sure in the dropdown box to pick the ones that say Kayfun Mini Bell Cap, Acrylic, and then the color.

Most all of the metal chimney barrels that we all ordered previously...have either been discontinued or are constantly out of stock. So, I ordered these below, and just unscrew and take off the top chimney cap part. Then use only the barrel part on the KF shorties.

$7.36 Replacement Chimney for Kayfun (5-Pack) - stainless steel / ohm logo at FastTech - Worldwide Free Shipping - They're also sold singly in the dropdown box.

ETA: There are other chimney barrels that will also work, on a variety of different bases though, too. I've seen them discussed on threads other than the Are You Done Stocking Up thread.

 

[Sugar_and_Spice]

Some of you may want to get the acrylic bell caps separately (that don't have the plastic chimney barrel part), and some of the metal chimney barrels. You don't have to worry about the heat getting to the plastic barrel then.

I've bought multiples of these below from FT and they work great with no problems. Also, these bell caps will accept any 510 drip tips. I found out the hard way (after ordering 2 lots of 5 other ones that were first recommended on another thread)...that they were tapered inside the sticking up plastic drip tip part on it...and as a result, they wouldn't take any drip tips except the squishy silicone ones that would then pop off too easily.

$5.02 Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (5-Pack) 5-pack at FastTech - Worldwide Free Shipping - Clear ones in a 5 pack, but they have them singly as well as in colors, too. Just make sure in the dropdown box to pick the ones that say Kayfun Mini Bell Cap, Acrylic, and then the color.

Most all of the metal chimney barrels that we all ordered previously...have either been discontinued or are constantly out of stock. So, I ordered these below, and just unscrew and take off the top chimney cap part. Then use only the barrel part on the KF shorties.

$7.36 Replacement Chimney for Kayfun (5-Pack) - stainless steel / ohm logo at FastTech - Worldwide Free Shipping - They're also sold singly in the dropdown box.

ETA: There are other chimney barrels that will also work, on a variety of different bases though, too. I've seen them discussed on threads other than the Are You Done Stocking Up thread.

The blue and pink singles are in stock. I just checked.

$1.69 Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer at FastTech - Worldwide Free Shipping

 

[oplholik]

I ran into that problem of getting the caps with the tapered drip tip hole also. GRRR!

 

[JCinFLA]

I ran into that problem of getting the caps with the tapered drip tip hole also. GRRR!

Yes...GGRRR, especially since I ordered 2 lots of them @ $5.54 per lot, AND 2 of them arrived broken! Then I found out about the drip tip problem, too.

I got some of the silicone drip tips (SKU #2341104) in Black, that will fit, but won't stay on if you bump it. Putting them in the stash with the caps to use as a last resort...while sitting at my PC or watching TV. At least those 2 places I'm fairly still and can find the drip tip if it pops off.

 

[aikanae1]

FT's "random color" resin drip tips are wonderful. I've been ordering them one at a time and haven't gotten a duplicate or color combo that I don't love yet. They usually have 4 to 5 colors mixed in, always a surprise in an otherwise dull order. Single oring on ss base and comes with an extra ring. It's a good thick ring.

I got coils again. The boxes were smashed and empty. Coils were everywhere. The Eleaf ecl's and another (I need to check which ones, I think 1.5 gs air) were loose, not in blister packs although they had eleaf boxes. Kinda weird. Good thing the drip tip had extra pkging.

Sent from my LGLS992 using Tapatalk

 

[Cosmic_Glaze]

Hello...
just found this thread did not even know it existed...
I saw that Steamcrave came out with a kit for the KF5 to make it a mini.. 2 issues I have with it.. it's like $45, and it appears to have a wider chimney than the org. Has anyone seen a mini kit for the KF5??
For the price of the SC kit I can get almost 2 SXK KF5 Minis..
which seems to be the better option if not a kit. The KF5 is a little ridiculous on a mech.
Thanks in advance..

 

[ceeceeisme]

FT's "random color" resin drip tips are wonderful. I've been ordering them one at a time and haven't gotten a duplicate or color combo that I don't love yet. They usually have 4 to 5 colors mixed in, always a surprise in an otherwise dull order. Single oring on ss base and comes with an extra ring. It's a good thick ring.

I got coils again. The boxes were smashed and empty. Coils were everywhere. The Eleaf ecl's and another (I need to check which ones, I think 1.5 gs air) were loose, not in blister packs although they had eleaf boxes. Kinda weird. Good thing the drip tip had extra pkging.

Sent from my LGLS992 using Tapatalk

Love that drip tip! I just put a 2 pack in my cart.

 

[ChelsB]

Love that drip tip! I just put a 2 pack in my cart.

Do you have a link? I'm interested!


Sent from my iPhone using Tapatalk

 

[HazyShades]

Do you have a link? I'm interested!


Sent from my iPhone using Tapatalk

Drip tips in general:
FastTech - Gadgets and Electronics
Resin drip tips:
FastTech - Gadgets and Electronics