The FastTech Thread For All FastTech Posts

[tA71ana]

I should get my order in the mail tomorrow morning! I figure it was in SF for 2 or 3 days, since it can take 3 to 4 days (under the best of circumstances) for mail to come from the West Coast to my location. YaY!

Depart USPS Sort Facility
July 26, 2013
FARGO, ND 58102
International Letter
Processed through USPS Sort Facility
July 26, 2013, 2:49 am
FARGO, ND 58102
Depart USPS Sort Facility
July 19, 2013
SAN FRANCISCO, CA 94128
Processed through USPS Sort Facility
July 19, 2013, 7:43 pm
SAN FRANCISCO, CA 94128
Processed Through Sort Facility
July 18, 2013, 1:24 pm
HONG KONG AIR MAIL CENTRE, HONG KONG
Acceptance
July 17, 2013, 10:52 am
HONG KONG

 

[Jerms]

This is interesting..
https://www.fasttech.com/products/1...6-electronic-cigarette-round-mouth-atomizer-7
Never have seen those before. Anyone recognize them at all?

Another ceramic mini-rba too
https://www.fasttech.com/products/1/10005209/1413313-juk23-rebuildable-electronic-cigarette-atomizer

That RBA in your second link is a clone of the Ebaron Dripper Pro! I think thats the first clone of that RBA, what a great price! I've wanted an EDP for a while but they're fairly expensive and I've heard mixed reports on how well they work without using NR wire. Anyone use an Ebaron successfully without NR wire here?

Sent from my LGL55C using Tapatalk 2

 

[RPadTV]

Anyone use an Ebaron successfully without NR wire here?

That's funny. I recently reviewed the eBaron Dripper Pro. You can build coils using only resistance wire, but I don't recommend it. The extra heat can potentially damage rubber/plastic parts if you're not careful...and even if you are.

 

[sbc83]

Help!

I cannot for the life of me find that wired usb passthrough on ft. Not the one with the battery, but the one without.


Please.

 

[Bud Man]

Help!

I cannot for the life of me find that wired usb passthrough on ft. Not the one with the battery, but the one without.


Please.

This one?
$5.50 Variable Voltage USB Passthrough Battery for E-Cigarette at FastTech - Worldwide Free Shipping

 

[funkyZero]

Yay for t3s ! I was really hoping I wasn't going to have to buy the version with the removable drip tip ("T4")..

The only thing that could top that would be a mt3s.

What is the diff between a T3 and MT3 ?
also does anyone know what the "S" is?

 

[sbc83]

This one?
$5.50 Variable Voltage USB Passthrough Battery for E-Cigarette at FastTech - Worldwide Free Shipping

Thank you Bud Man!!

 

[Ref Minor]

Ah crappolla! It looks like they are selling the 1100 twist way out in front of themselves. My order has all items ready to ship except for the twist that says
Scheduled Ship Date: 7/31/2013

mine shipped yesterday

 

[Nkayy]

I had a twist that looked exactly like the fasttech one. Died in a month. I guess 12$/month is not a bad deal, but I spent way more and was really sad about it. I'll be waiting to see what the life is like on these fasttech ones.

 

[Ref Minor]

I just got my Itast SVD from fast tech 2 days ago and I compared it to the one my distributor got from Innoken and needless to say there are some differences as mine has rounded buttons not flat where the + and _ buttons are there are not cross grooves and the bottom cap is black on the inside not white and the screw handle is a bit different also the display is black glass and not mirror , that being said all the differences I prefer the rounded buttons are more comfortable the screw handle is less wobbly and seems to fit better I believe i got a hybrid of the pre-release and the production overall i'm very happy with this unit

It is still a genuine Innokin, there was a big thread about the SVD from FT vs Innokin and no one could come up with what the genuine was exactly as all the people with none FT ones had something slightly different to each other, different batches have slight variations, probably as Innokin source parts from different factories who use slightly different specs.

 

[Ref Minor]

I had a twist that looked exactly like the fasttech one. Died in a month. I guess 12$/month is not a bad deal, but I spent way more and was really sad about it. I'll be waiting to see what the life is like on these fasttech ones.

My 650 twist is still fine after a month or so. I have just ordered a 1100.

 

[Ref Minor]

Reserved for witty comment.

 

[sbc83]

What is the diff between a T3 and MT3 ?
also does anyone know what the "S" is?

From my understanding, Mt3s have a clear non removable drip tip and is pretty much a elongated evod. The t3s is the same but w/o the colored metal jacket.

 

[funkyZero]

They just shipped my Brass Sentinal,Panny batts and a holster.

They even sent me a pic of the package,AMAZING service,these guys know what they are doing.

View attachment 235338

I know why they do that now. It's BAIT!
You reach at your monitor and can't touch it so you go order more stuff to try it again.

 

[mtdewfreak]

What is the diff between a T3 and MT3 ?
also does anyone know what the "S" is?

T3 = old style bottom coil clearo with black mouthpiece. entire base is replaced for new head.

MT3 = old style bottom coil clearo with small sight windows with black mouthpiece. entire base is replaced for new head

T3S = new style bottom coil clearo with clear mouthpiece. also has replaceable heads

MT3S = new style bottom coil clearo with small sight windows and clear mouthpiece. also has replaceable heads.

The Mxxx models do look like the EVODS...

 

[funkyZero]

I cant wait too getthe Sentinel V3,im gonna make it look like the best Mod on the planet......Im also going too apply a clear shelac coating after i get her polished up,shes gonna look like solid gold when im done.

How To Clean Brass With Lemon Juice And Baking Soda

How To Clean Brass With Lemon Juice And Baking Soda | Apartment Therapy

If you are into this sort of thing, you might want to get a can of rottenstone and try it out. My dad and I restore collectable firearms (I do the finishing and he does repairs and plasma-arc), and this is the stuff I use on the stocks, etc as final finishing. It would work great on brass as well. Mind you, you would want to do the baking soda thing first if there is heavy dirt or scratches as rottenstone is extremely fine. I use rottenstone to finish off the polyurethane. My stock work literally looks like wooden glass when I am finished and rottenstone is about the only way to achieve that sort of finish. You use your hands to do the rubbing. It's slow work though, a typical stock takes me about 20 hours of hand rubbing to get the desired perfect finish. You could prob do the brass mod is a few hours if the pre-finish cleaning was done well. I would polish it before and after applying the clear. Of course then you wouldn't want to pick it up or touch it anymore out of fearing scratching it. hehe... I can imagine it would be gorgeous though.


Amazon.com: Rottenstone, 1 lb.: Home Improvement

 

[Myrany]

I Got my Red K100 and Pyrex DCT's from Fasttech today.

The K100 seems to be a very nice solid build but I think it will benefit from some Noalox as the threads "squeek" (not sure how to describe it).

The Pyrex DCT's with the exception of no SMOK labeling I literally cannot tellt he difference between these and my SMOK original one. Oh and for those that care about these things the Fasttech red Pyrex DCT perfectly matches the Fasttech Red K100 in color.

 

[vantagebox]

also want to thank u for posting the larger pic. So the carto that u have is re-usable? how long do these typically last you, if I may ask?

on a separate note, my first order from FT shipped directly from HK to PDX and never went thru SFO; took 6 days total, I'm amazed...

My batt. is 5.9 cm and FT list theirs as 450 mah as 6.2 cm so they are real close in size.




I just saw this

https://www.fasttech.com/products/1...-400mah-rechargeable-battery-for-electronic-c This might work for her.

 

[mtdewfreak]

I Got my Red K100 and Pyrex DCT's from Fasttech today.The K100 seems to be a very nice solid build but I think it will benefit from some Noalox as the threads "squeek" (not sure how to describe it).The Pyrex DCT's with the exception of no SMOK labeling I literally cannot tellt he difference between these and my SMOK original one. Oh and for those that care about these things the Fasttech red Pyrex DCT perfectly matches the Fasttech Red K100 in color.

pics or it didn't happen

 

[christeymg]

I ordered a Innokin SVD on 7/25. It hasn't left Hong Kong yet. Holy hell, what's taking so long! I need my new light saber!