Shanan: NONE of your attachments don't work...
They should be now. I had some technically difficulties.
- Status
They should be now. I had some technically difficulties.
Hold the Right side adjustment button for 10secs to switch between N01 and N02.
Cant remember the technical explanation,
N01 is RMS
N02 is AVG,most people use this.
Are you in VV or VW?
N01 is RMS
N02 is AVG,most people use this.
Are you in VV or VW?
Twice the fun? So people can get REALLY REALLY upset? I dunno...
VW, it was suggested to me to use VW so I wouldn't haveto worry about voltage. What is AVG and RMS?I actually have a vision CE6 on right now set at 10 watts and seems to be vaping okay...
It's fairly simple- I'll give you some basics.
RMS measurement, is more accurate in predicting the actual power delivered to the atomizer. For instance, a 4.1 volt RMS measurement will deliver 5.6 watts to a 3.0 ohm atomizer- and that is around the same for a mod (like the Provari) that delivers non-pulsed DC to the atomizer.
Where VAVG will deliver significantly more wattage at the same apparent displayed voltage.
The reason RMS is preferable is two fold:
1. Simple accuracy.
2. More suitable for low watt vapers or low resistance users who need to pull the volts back a long way.
Not my words.
Im normally happy at 8 watts,so if you get burning,dial it back a bit.
RMS measurement, is more accurate in predicting the actual power delivered to the atomizer. For instance, a 4.1 volt RMS measurement will deliver 5.6 watts to a 3.0 ohm atomizer- and that is around the same for a mod (like the Provari) that delivers non-pulsed DC to the atomizer.
Where VAVG will deliver significantly more wattage at the same apparent displayed voltage.
The reason RMS is preferable is two fold:
1. Simple accuracy.
2. More suitable for low watt vapers or low resistance users who need to pull the volts back a long way.
Not my words.
Im normally happy at 8 watts,so if you get burning,dial it back a bit.
Pretty close to flush with the threads. Go little by little testing on the battery every little bit.
Thank you! So RMS is NO1? You said before most people use NO2...you say now NO1 is preferable? Just wanna be sure? I appreciate your help.
Last edited:
Mine threads in but the threads are loose. On my ego, the light blinks when I press it and on the vamo it registers 9.9ohms which I assume means there is no contact.
I ripped the explanation from someone elses post,now reading it Im confused too(lesson learned)
I do know that N02 is what mine is always set at.
I do know that N02 is what mine is always set at.
Search NO2 on here, it was me who said NO2 was what you wanted, that appears to be the advice people are giving.
Yes, 9.9 means no contact or theres nothing on it. And from what I've been reading keep it No2
Sounds like some new vamo users here could use this. http://www.e-cigarette-forum.com/forum/vamo/359600-vamo-vv-vw-v2-user-manual-download.html
No!, NO1 is avarage and NO2 is RMS you should be at NO2
Sent from my iVap using Tapatalk HD
I picked up my eVic at Panda ecigs for $84 shipped with lifetime warranty. I will take that deal any day of the week and pay the extra 10 bucks.
- Status
Similar threads
- Locked
