The T4s, although GORGEOUS and with very nice removable drip tips that I wanted, are not performing normally :/ I've put the T4 on an eVic, on a Gripper [with a 510/eGo adapter], on a K100, on my 18350 eGo tube, and finally on the smallest of my eGos, the 650 mAh :/ A mouthful of burned mess is what I get with an extended draw :/ A VERY SHORT button push and I get a mouthful of flavorful vape... a longer pull and burned :/ I'll watch reviews this weekend before I do anything more with them. The one I have may be defective, the JUICE I am using, a Mt Baker Vapor Green Apple, may be apt to burning with it, I am not sure, but I'll not waste more finding out until I read some reviews. =]
Have you had a T4 burning juice with as weak a battery as an eGo 650mAh? I've left it soaking all night and it still gives me a good vape with a short draw and a mouthful of burned vape with a long draw :/
Great idea!!! I will pass this on! And once the nail polish is dried, you can poke a smaller hole with it with a needle!!
Have you tried another wick? Sounds like it is not pulling e-liquid.
If you have no spare heads:
Remove base
Wiggle pipe off coil head
with Tweezers - carefully remove flavor wicks - Should be (2) 1mm wicks or (1) 2mm wick
If (2) 1mm wick, they lay side by side in the slot, over the coil wick
anyway, there should only be enough wick material in there to fill the void without over packing. If they accidently placed an extra(3rd flavor wick) remove it from the group.
If only 2 (1mm) wicks, split one 1/2 and install 1.5 back in the slot
If 1 larger(2mm wick) split a small section away and install most back in place.
If this works, you should be good to go. If it starts to leak, add a bit of wick back in.
If it still goes dry, remove a tiny bit more.
Always look at the slot once the pipe is back on and be sure there are no Gaps to leak fluid. Fluff wick ends.