The FastTech Thread For All FastTech Posts

Status
Not open for further replies.

RANGERmsr

Super Member
ECF Veteran
Verified Member

Man, NOTHING like the Scorpions is there!?. Those were the days for sure. Our 'cover 'band covers a lot of top forty (where we can) on both charts as well as anything else like classic rock, classic country. We're game to try anything (Patsy Cline, ACDC, etc). We also have some original music, more inclined to be southern rockish.

I have to say Lisa caught my attention with that Jason Charles Miller. Definitely going to give some more listening time.

Sorry guys, but I'm liking my sigelei 8W right now. LOL
 

Scope666

Super Member
ECF Veteran
Verified Member
Jul 29, 2013
903
1,066
Glen Ridge, NJ
I've been doing an interesting experiment tonight. I have JD Vapor Co's DC Limeade (awesome btw) in both the Hercules (Ithaka clone) and the Kayfun 3.1 ES clone. Both are great vapes, but definitely different. If I had to pick an overall winner, I would say the Kayfun mainly for ease of building. Ithaka definitely wins on refilling though, Kayfun is a bit trickier. (I'm using the top fill method, I think I remember reading not to use a metal blunt tip on the fill port, you have to use plastic, and I don't have anything that's a small enough diameter for the fill port)
 

lisancentraltx

Vaping Master
ECF Veteran
Verified Member
Aug 28, 2009
4,173
9,491
59
Ringling Brothers Circus
I've seen a lot of threads being closed at the classies due that they are counterfeit products (aka clones?) so I can't sell my fasttech mods over there?

o_O I have never heard that. I have heard that some people buy stuff in classies and can't sell it for more than they paid - that's a rule or something, so maybe that was it. I also heard that someone won a mod or something and then sold it and they were blacklisted... My stuff is all from FastTech or classies or sales and I'm a buyer, not a seller, so I'd better look into things before I decide to clean house =]

I've been doing an interesting experiment tonight. I have JD Vapor Co's DC Limeade (awesome btw) in both the Hercules (Ithaka clone) and the Kayfun 3.1 ES clone. Both are great vapes, but definitely different. If I had to pick an overall winner, I would say the Kayfun mainly for ease of building. Ithaka definitely wins on refilling though, Kayfun is a bit trickier. (I'm using the top fill method, I think I remember reading not to use a metal blunt tip on the fill port, you have to use plastic, and I don't have anything that's a small enough diameter for the fill port)

Heya Scope - have you found a RBA that would fire on the MVP2? I got the M6 https://www.fasttech.com/p/1422100 coiled and working on the MVP2, but the AGA T2 will only fire on a mech :/
 
Last edited:

Scope666

Super Member
ECF Veteran
Verified Member
Jul 29, 2013
903
1,066
Glen Ridge, NJ
o_O I have never heard that. I have heard that some people buy stuff in classies and can't sell it for more than they paid - that's a rule or something, so maybe that was it. I also heard that someone won a mod or something and then sold it and they were blacklisted... My stuff is all from FastTech or classies or sales and I'm a buyer, not a seller, so I'd better look into things before I decide to clean house =]



Heya Scope - have you found a RBA that would fire on the MVP2? I got the M6 https://www.fasttech.com/p/1422100 coiled and working on the MVP2, but the AGA T2 will only fire on a mech :/


I have the MVP1, but the same concept applies. You need to wrap your coil so that the resistance is higher than it is now (what does it read now btw?) ... On mine I have to be over 1.2 ohms. You can get there by either using thinner wire (32 or 34 gauge for example) or by adding more wraps... since it's a geni you would have to space the wraps a bit closer to each other since you don't have a ton of room to work with.

This is a higher ohm build I did for the SVD awhile back:


GkmXXFn.jpg
 

Ref Minor

Ultra Member
ECF Veteran
Verified Member
May 11, 2013
2,476
4,403
UK
I think I finally got a refund,,,,,,,,

when I check on my shipments, it says 0.00 where it used to say 54.00 and some change,,,,,,,I'll have to have my husband check the Paypal account.

Yay, let's hope so, then we can move on to worrying about Cap'n Shay and his missing louse.
 

RANGERmsr

Super Member
ECF Veteran
Verified Member
I think I finally got a refund,,,,,,,,

when I check on my shipments, it says 0.00 where it used to say 54.00 and some change,,,,,,,I'll have to have my husband check the Paypal account.

YAY! Sounds like you did! I got a notice from Jamine that said my order was returned. Then I went straight to paypal, and the money was already there. She had said it may take a day or so, so I was pleasantly surprised :). When I looked at my order history, that order showed 0.00. :thumb:. Sounds like good news to me!
 

Capt.shay

Vaping Master
ECF Veteran
Verified Member
May 10, 2013
3,662
8,189
W. Ma. U.S.A.
Hey! I just read this and checked my account and the balance says $0.00 as well. I'm sure it was returned. In all likely hood, weeks ago. Off to paypall to see if I have a credit.

Edit: No credit to PayPall, no notice in E-mail, no notice on site. They might be working on it right now?
 
Last edited:

amesenbrink

Full Member
Nov 10, 2013
30
13
OK, I'm new and ready to order a Nemesis clone from fasttech. I'm not sure about rebuildables just yet. I'm sure I could do it, but not sure I want to fiddle with it that much. I figured I'd start with my Kanger Mini PT 2 I bought with my ego-c twist.
In my cart, Nemesis clone, 510 to eGo Adapter, Variable Wattage Kick Module.
Over at amazon i've got a Nitecore IntelliCharger i4, and (2 Pieces) IMR 18650 2000mah 3.7v High Drain Li-mn Rechargeable Battery with Button Top.
What else do I need?
 

tA71ana

Ultra Member
ECF Veteran
Verified Member
May 26, 2012
1,243
2,530
Round N Round the Mulberry Bush

Jayvaps

Super Member
ECF Veteran
Verified Member
Sep 22, 2013
614
864
South Florida
OK, I'm new and ready to order a Nemesis clone from fasttech. I'm not sure about rebuildables just yet. I'm sure I could do it, but not sure I want to fiddle with it that much. I figured I'd start with my Kanger Mini PT 2 I bought with my ego-c twist.
In my cart, Nemesis clone, 510 to eGo Adapter, Variable Wattage Kick Module.
Over at amazon i've got a Nitecore IntelliCharger i4, and (2 Pieces) IMR 18650 2000mah 3.7v High Drain Li-mn Rechargeable Battery with Button Top.
What else do I need?

Are the batteries efest? If so, they are good to go.

I personally would not ruin the sleek look of the neme(even a clone) by putting an ego threaded device on top of it, but it will work....

Also, I think the brass neme clones on FT are having issues shipping within their stated '3 days' right now, so dont be surprised if your order takes longer to ship out. If you need it quick, that is something to consider. I am not sure how the shipping is going currently for the ss neme clone. I will say though, they are really nice. I would also look at getting some 18350 batteries, as the neme clone is even sleeker running an 18350 with a kick. :2c:
 
Status
Not open for further replies.

Users who are viewing this thread