- Status
I love the white tank...I think it looks sharp .....
White for menthol juices, black for non menthol juices.
Plug and play has come a long way, though the term may not be used much anymore. Same with this, though it would take various merchants to come together and create a standard.
Hi guys (smile)...Can you find it in your hearts to help a first time modder that has no idea what shes doing?? lol Just for the record I have never modded anything in my life..However I reeeeally want to slot my own fusion cartos for my tanks..I have studied how to cut them etc...I just don't I have the propper tool...
I scoured the garage and found a " Craftsman rotary tool..single speed 30,000 rpm -model #9610052...It seems to be missing the cutting wheel as well the "arbor?"That screw into the rotary tool and holds the wheel
I hope Ive made myself clear lol.....I thought about taking it all up to Sears in the unlikely event I'll find someone that knows what they are talking about, highly unlikely anymore.....
However, If annny of you know what wheel/arbor I need and can pop up an amazon link ir such..I would be so appreciated and can maintain my bragging rights> I diiiid it all by mysellllf lmao....Thanks again, Ivy
EDIT: Nevermine this post...read below
I scoured the garage and found a " Craftsman rotary tool..single speed 30,000 rpm -model #9610052...It seems to be missing the cutting wheel as well the "arbor?"That screw into the rotary tool and holds the wheel
I hope Ive made myself clear lol.....I thought about taking it all up to Sears in the unlikely event I'll find someone that knows what they are talking about, highly unlikely anymore.....
However, If annny of you know what wheel/arbor I need and can pop up an amazon link ir such..I would be so appreciated and can maintain my bragging rights> I diiiid it all by mysellllf lmao....Thanks again, Ivy
EDIT: Nevermine this post...read below
Last edited:
:: struttting in ...arms up high..to the theme music of Rocky::
Nevermind...Yaay! I finally found all the parts to my dremel... I slited a slot! Ok, so it's a little shakey and I have no dental pic or anything small/sturdy enough to clean out the left over thin metal..But, slap my a** and call me happy, I Did It!
I know this is probably nothing to you guys However,I put off recording even my VCR/DVR etc for eons due to being intimidated...If that gives you any clue lol...
Thanks to all of you that made it sound so doable...That and my obsession to have a better tasting carto in my tank, did it lol
Nevermind...Yaay! I finally found all the parts to my dremel... I slited a slot! Ok, so it's a little shakey and I have no dental pic or anything small/sturdy enough to clean out the left over thin metal..But, slap my a** and call me happy, I Did It!
I know this is probably nothing to you guys However,I put off recording even my VCR/DVR etc for eons due to being intimidated...If that gives you any clue lol...
Thanks to all of you that made it sound so doable...That and my obsession to have a better tasting carto in my tank, did it lol
Last edited:
Hey happy, consider your ... slapped... kudos
rofl switched... I guess I asked for that..:: pause:::... May I call you grouchy/sleepy and slap yours too?...::: girly lil wiggle of the eyebrows::.... Just sayin
Way to go girl......conquering doubt is a real biggie - for any one.
Each time you slot one, you'll get better. Kinda follows that "practice makes perfect" theme I guess.
Congratulations on modding ur carto.
The world is all yours 
Way to go girl......conquering doubt is a real biggie - for any one.
Each time you slot one, you'll get better. Kinda follows that "practice makes perfect" theme I guess.
Congratulations on modding ur carto.
Thanks Rosco...:: hands on hips...booming voice>>>> Cartomizer slot today...The VV Mod 2000 tomorrow....I shall be rich! ( lil laugh)
Last edited:
Congrats Razor!!!
I am not very smart when it comes to building stuff..but with the help of ecf...anyone can do it...I actually bought some tools just for MY use ....I still slot my cartos, while some hole em.....I use one slot and it's very small..works great...I even made fill holes in my tanks...woo hoo! I've come a long way since first joining ecf...
I am not very smart when it comes to building stuff..but with the help of ecf...anyone can do it...I actually bought some tools just for MY use ....I still slot my cartos, while some hole em.....I use one slot and it's very small..works great...I even made fill holes in my tanks...woo hoo! I've come a long way since first joining ecf...
Congrats Razor!!!
I am not very smart when it comes to building stuff..but with the help of ecf...anyone can do it...I actually bought some tools just for MY use ....I still slot my cartos, while some hole em.....I use one slot and it's very small..works great...I even made fill holes in my tanks...woo hoo! I've come a long way since first joining ecf...
I was thinking that myself. From when I didn't even know how to vape properly and being intimidated by some of the people on ECF until now. It's a long way in between.
Congrats Razor!!!
I am not very smart when it comes to building stuff..but with the help of ecf...anyone can do it...I actually bought some tools just for MY use ....I still slot my cartos, while some hole em.....I use one slot and it's very small..works great...I even made fill holes in my tanks...woo hoo! I've come a long way since first joining ecf...
Thanks for the encouragment debb (smile)... You know it's funny..I'm a custom faux finisher and most of the men in my nieghborhood envy my toolbox/ladders lol... But, when it came to modding e-cigs I was terrified lolol
I do think the wheel on my dremel is a tad too big - the slots too big..But, it'll work
Thanks for the idea 5 Card & Ruppy. I ordered 2 tanks from Vaporescence, and I think the tank is fantastic. Now to dremmel a Fusion!!
You sure can. That's pretty much all I use in that tank these days.
Just make sure you have an adapter unless you have the 801 top cap.
I only slot them once and they work great.
Good luck.
Hey, any of y'alls seen this thread? http://www.e-cigarette-forum.com/forum/tips-tricks/226475-thank-me-later.html
I tried it the other day on a Fusion and found it to be pretty handy. I didn't use the pliers to punch the holes, I just put small dents to guide my drill bit but it made things quicker and easier. Neater too.
I tried it the other day on a Fusion and found it to be pretty handy. I didn't use the pliers to punch the holes, I just put small dents to guide my drill bit but it made things quicker and easier. Neater too.
Loft, I am single slotting with the Fusions, now, and very pleased with it.
I have also single slotted only half-way through and did a punch through the remainder. That works for me as well - it is my backup method when I miscalculate the depth with the carto and dremel.
I usually use a 70p/30v and run in the 5v neck of the woods and have had no problems.
I have also single slotted only half-way through and did a punch through the remainder. That works for me as well - it is my backup method when I miscalculate the depth with the carto and dremel.
I usually use a 70p/30v and run in the 5v neck of the woods and have had no problems.
Last edited:
- Status
