The iHybrid APV - A fully Customizable Genesis

Status
Not open for further replies.

Skud

Super Member
ECF Veteran
Sep 30, 2010
421
1,507
41
South Florida
www.powerstationstudios.com
Posting this here too...

I thought this was hilarious. See if you get the joke!

383727_10200275469793182_1119752988_n.jpg

hahaha. one of the guys who works for me toured with Seal for years, as a playback engineer. all the venues and promotors and whatnot would always give him these expensive as bottles of champagne, like $2000 a bottle type stuff, but since Seal doesn't drink, he'd always give them to my guy. my guy said he probably drank about a 1/4 $million worth of champagne in the couple of years he toured with him.
 

Skud

Super Member
ECF Veteran
Sep 30, 2010
421
1,507
41
South Florida
www.powerstationstudios.com
Has anybody got the replacement tanks from IBTanked? How are they fit and finish wise?
Gotta find something QUICK, going nuts without my IHY:( But then again, the HR will prolly be here before a replacement tank would be:unsure:

hit up Kathy(ecf user name: Badazzle)

she will get you superb tanks in no time flat

just got a batch, if you look back far enough you'll see my pics of them. ordering another batch ASAP for extra backup.
 

Skud

Super Member
ECF Veteran
Sep 30, 2010
421
1,507
41
South Florida
www.powerstationstudios.com
I'm in the same boat tat. Those clear standards are titts! Especially rocking the white o rings :D

luvin' that crap out of my standard, looks, performance, the whole nine. the only thing that could pull me away would be a really "techy" LE. ::hint hint::

btw have you seen TRON lately? :p
 

Tat_skull

Vaping Master
ECF Veteran
Verified Member
Dec 20, 2010
4,210
6,535
New Mexico
hit up Kathy(ecf user name: Badazzle)

she will get you superb tanks in no time flat

just got a batch, if you look back far enough you'll see my pics of them. ordering another batch ASAP for extra backup.

I sent her a PM on X-Mas day when I broke it but still haven't heard back, prolly swamped from the
Holidays:unsure:
 

LadyStrick9

Ultra Member
ECF Veteran
Verified Member
Jan 9, 2012
1,096
2,055
Colorado
Hello everyone, I haven't been on the forum for a few days and am so far behind, there's no hope of catching up, UGH. I'm going to start from current post and go backward...that way I'm at least somewhat "current", eh? If I've missed anything that should be added to the Reference Spreadsheet, I'd appreciate it if someone would PM me? I would hate to miss something really important!

:) Thanks, folks! Happy New Year!

~Lady~
♥♥♥♥♥♥♥
 

LadyStrick9

Ultra Member
ECF Veteran
Verified Member
Jan 9, 2012
1,096
2,055
Colorado
That looked like my setup after 6 months ingline. I started getting people going and selling off stuff. Now I have 2 mods, a twist, a handfull of tips and atties, and 4 kinds of juice.

That is similar to my eventual goal Charger! I can't believe how much smaller the "need" section is now that I've switched to having 1 iHybrid, a ZAU and a couple other devices I love! Most of the RBA stuff fits in a small section (drawer) of my organizer. And now that I'm doing DIY I can foresee having less bottles piled up too! Now, notice I DIDN'T say I've SPENT LESS? LOL Nope...didn't say that and, I don't think I can (yet!). LOL

Happy Post Christmas and good morning to all. I think in the all knowing SPREADSHEET there was information abouit the difference in the letter. I will look and post when I find it, practicing my skills finding stuff there. WOOHOO

There is an entry on Line #72, but it addresses the "A" and "D" only. I appreciate any suggestion or links for updating. I did add the information you PM's earlier as well. Thanks again thevinstigator!

I'm still catching up....so bear with me folks :)
 

MrMayhem

Super Member
ECF Veteran
Verified Member
Aug 21, 2012
673
594
Maryland, USA
Hello everyone, I haven't been on the forum for a few days and am so far behind, there's no hope of catching up, UGH. I'm going to start from current post and go backward...that way I'm at least somewhat "current", eh? If I've missed anything that should be added to the Reference Spreadsheet, I'd appreciate it if someone would PM me? I would hate to miss something really important!

:) Thanks, folks! Happy New Year!

~Lady~
♥♥♥♥♥♥♥

Happy New Year to you, Lady!
 

kiba

Vaping Master
ECF Veteran
Verified Member
Sep 21, 2012
4,283
7,451
40
Alexandria, Va, USA
www.facebook.com
+1 to that. One of these days I'll order some. Probably. Maybe.

you should, its all I really use, I keep some 325 around for my gf's out of the house setup, she uses a GTUS on a kicked gus tele and that thing just doesnt wick well with anything higher than 325.... but for all my stuff, and her other stuff we use 500. Some vendors sell 400 as 500, I usually order mine from the UK but I saw some from a US vendor and it was cheap so i figured I'd try it out, but when I got it and compared it to my other 500, it was obviously 400 under a magnifying glass :(

hahaha. one of the guys who works for me toured with Seal for years, as a playback engineer. all the venues and promotors and whatnot would always give him these expensive as bottles of champagne, like $2000 a bottle type stuff, but since Seal doesn't drink, he'd always give them to my guy. my guy said he probably drank about a 1/4 $million worth of champagne in the couple of years he toured with him.

yeah that pic cracks me up, seal looks like he is happily dropping a deuce :laugh:
 

kiba

Vaping Master
ECF Veteran
Verified Member
Sep 21, 2012
4,283
7,451
40
Alexandria, Va, USA
www.facebook.com
on a sad note my buddy dropped his iHy spider getting out of the car, it bounced on the asphalt and rolled under the car... one good thing is that he had his tank protector on so the tank somehow didnt break (i have a new respect for TP's) but the anodising is all scraped up and because alum is a kind of a soft metal there are some gouges down the side of it through the ano and into the metal, it looks like it landed flat on its side, and the tp was slightly bent. I felt so bad for him :cry: I was able to fix the slightly bent tp part w/ some locking pliers wrapped in paper towels and rubber gloves, but I just dont know how to go about fixing the rest as a lot of it has gouged marks through the ano and into the alum..... my gf has dropped her zen top caps a few times and gotten dings, but the 316 ss prolly did more damage to the ground than was done to it and I just sanded out the dings w/ 800 grit sand paper and some mothers polish.... if it had been just his iHy top cap he dropped I would of done the same thing but actually the top cap is completely untouched.

Anyways is there any other way I can help him? I mean it still works great and all but its heartbreaking to see probably my favorite iHy (up untill the sugar skull comes out) damaged in this way :( Its so sad because he's such a good dude and he doesnt have a lot of cash due to child support so one of my other coworkers sold him his spider at a really great price, its his only hybrid and he loves it, hes always cleaning it and he takes good care of it, it was just this one time getting out of the car while he was on his phone and it probably slipped his mind. I would of taken a pic of it but it didnt seem appropriate :cry:
 

thevinstigator

Super Member
ECF Veteran
Verified Member
Sep 28, 2012
404
889
New Jersey
on a sad note my buddy dropped his iHy spider getting out of the car, it bounced on the asphalt and rolled under the car... one good thing is that he had his tank protector on so the tank somehow didnt break (i have a new respect for TP's) but the anodising is all scraped up and because alum is a kind of a soft metal there are some gouges down the side of it through the ano and into the metal, it looks like it landed flat on its side, and the tp was slightly bent. I felt so bad for him :cry: I was able to fix the slightly bent tp part w/ some locking pliers wrapped in paper towels and rubber gloves, but I just dont know how to go about fixing the rest as a lot of it has gouged marks through the ano and into the alum..... my gf has dropped her zen top caps a few times and gotten dings, but the 316 ss prolly did more damage to the ground than was done to it and I just sanded out the dings w/ 800 grit sand paper and some mothers polish.... if it had been just his iHy top cap he dropped I would of done the same thing but actually the top cap is completely untouched.

Anyways is there any other way I can help him? I mean it still works great and all but its heartbreaking to see probably my favorite iHy (up untill the sugar skull comes out) damaged in this way :( Its so sad because he's such a good dude and he doesnt have a lot of cash due to child support so one of my other coworkers sold him his spider at a really great price, its his only hybrid and he loves it, hes always cleaning it and he takes good care of it, it was just this one time getting out of the car while he was on his phone and it probably slipped his mind. I would of taken a pic of it but it didnt seem appropriate :cry:
Nothing could be worse than droping your prized possesion, I am really glad I got my wife a disposable Mod from a Co-Op to use before the Flower Power gets here. Last night she had it in her lap and jumped up and Mod went flying across the room. I would have been mad had it been My Spider or HR or the Flower Power, but since it was just a $25 Mod I didn`t care.
 
Status
Not open for further replies.

Users who are viewing this thread