The iHybrid APV - A fully Customizable Genesis

[The Hill Giant]

Do 650's really hit that much harder? Don't have any 650's so I've never tried them. I figured volts are volts :/. Gonna have to shop again.

They have a higher wattage limit

 

[The Hill Giant]

The MNKE high drain IMR batteries are the ones with the really high watt/amp limits, right?

 

[Cyclin]

Do 650's really hit that much harder? Don't have any 650's so I've never tried them. I figured volts are volts :/. Gonna have to shop again.

Actually I believe it has less to do with the battery size and more to do with how clean your threading is on each tube. My iHy hits the same with both sizes and I believe its because I periodically clean the threads of both. In fact, before I cleaned my 18650 tube a while back my 350 hit harder. Just my And I may be totally wrong, its been known to happen from time to time (though my wife swears it happens more often than i do)

EDIT: Ha!! I was totally wrong! Well except when my 650 wasn't performing as well that was definately a threading issue cause it fixed it But still... score one for my lovely wife lol

 

[Cyclin]

The MNKE high drain IMR batteries are the ones with the really high watt/amp limits, right?

Correct

 

[amienichole]

It looks good Carl!!

 

[Cyclin]

They have a higher wattage limit

Wow I didn't even know that! He's totally right check out the spec comparison

AW IMR 18350

AW IMR 18650

Looks like the 350 Max Discharge is 4 amps less.

 

[Rise]

I drive a 1999 Audi A6, it is an adventure everyday to see what else will go wrong but I love it.

Also got a minivan but that's neither here nor there.

 

[silentdoom]

Looks like I'm going to be buying some 18650's!

 

[Rise]

Looks like I'm going to be buying some 18650's!

Didn't you trade all your tubes? I just to brand new aw IMR batteries then I read this, figures lol.

 

[Big Hitter]

Is there anyway around pushing juice up the wick when filling with a syringe ??

All my other gennys have much larger fill holes so air can escape while filling.

I hate to take the ground screw out each time but I might have to ... kind of a bummer.

 

[car1os]

It looks good Carl!!

I love it Amie, think it will be a in house mod though, keep it mint

carl

 

[Big Hitter]

Wow I didn't even know that! He's totally right check out the spec comparison

AW IMR 18350

AW IMR 18650

Looks like the 350 Max Discharge is 4 amps less.

Yep I won't use the 350s with the low ohm coils I like.
A 1.0 or 1.1Ω coil is really pushing the 18350 batts even though its only for a few seconds.
Better safe than sorry, and I like big batts

A 26650 iHy would be awesome .... with like a 12ml tank

 

[VaporHead512]

Is there anyway around pushing juice up the wick when filling with a syringe ??

All my other gennys have much larger fill holes so air can escape while filling.

I hate to take the ground screw out each time but I might have to ... kind of a bummer.

Empty the tank before filling, or tilt the pv to where the juice is farthest away from wick. Those worked for me.

 

[amienichole]

I got my SS tanks today. I think I am gonna like them.

 

[kiba]

Fill w/ the wick up like this

• sent from a janky iphone 5

 

[silentdoom]

Didn't you trade all your tubes? I just to brand new aw IMR batteries then I read this, figures lol.

Got an illuminati on the way !!!!!!

I need to read more up on these batteries... I'm using a 3/4 wrap twisted 32 on my 350's and its metering at 1.2. I get scared reading some of these comments!

 

[Rise]

Ah yes you do don't you. Got the green envy in today! Haven't set it up yet been to busy staring at it.

 

[Bamrz]

Is there anyway around pushing juice up the wick when filling with a syringe ??

All my other gennys have much larger fill holes so air can escape while filling.

I hate to take the ground screw out each time but I might have to ... kind of a bummer.

There's a couple of ways to keep it from getting messy. One's already been mentioned, fill with tank horizontal and wick facing up. If you have a tube shaped wick, fill into the wick instead of the fill hole. Or just splooge it quickly! Strangely enough, it does work.

 

[Omni3vil]

The airhole is about twice the size (I believe 2.5 as aposed to 1 mm) I felt the same way at first, but my cobra is gathering dust today give it a few days I'll be shocked if you don't feel the same.

Unless you can somehow find a 1mm topcap (I think the trippy glass ones will be customizable) the only thing I could think of is drip tip.

I thought triply wasn't making them because they were worried about breakage?

 

[Tat_skull]

Man, now that was a catchup(never going to sleep early and not loggin' in all day again!!) Gotta question for the smurfs I got some Papa smurf from LJ's today, so, Do i need to steep this stuff? Or can I just fill the tank after a cleaning? I dont wanna wait, this stuff smells delectable!! But then again so does Purle Dreams Man I wish my tanks came from Yuma today, then I could just fill both my IHy's