The iHybrid APV - A fully Customizable Genesis

Status
Not open for further replies.

ian74

Ultra Member
ECF Veteran
Verified Member
Feb 28, 2012
1,864
5,157
Alexandria, VA
Wait, am I reading this correctly? I'm going to get a second one too????? You've got to be kidding me!? That's unbelievable!!! Holy crap. Thanks so much Faceless!!!! When does the second one ship out? (If this is really happening and I'm not dreaming this)

quick side note! The first 12 I shipped out will be getting another iHybrid free of charge. I changed a detail on the top, inside, you wont be able to notice it but it changes the measurement by .105" for the top screw to adjust draw :). So you got 2 iHybrids for the price of 1.

I won't be on until tomorrow. Have to get some R&R, been a busy day and I'm stressed lol
 

elfstone

Ultra Member
ECF Veteran
Verified Member
Jan 15, 2012
2,601
3,018
OH
WOW! We get an extra one?! That's too awesome!

The top cap is just rough as in not polished.

I can't wait to see other people chiming in, I find it difficult to explain more. It's an overall nice looking PV, I bet it performs greatly but I haven't tested it yet, and it is a bit rough around the edges. Faceless really did a great job, but this is after all a first ever run. I AM NOT disappointed for buying it, but rather excited to be in at the ground floor with something that will become very soon a solid landmark on the rebuildable scene!

Congrats, Faceless, and thanks!
 

cryptodogg

Ultra Member
ECF Veteran
Verified Member
May 14, 2012
2,012
3,076
Cornelia, GA
Yes... There are several scratches on the body and on the sleeve, I couldn't avoid having one in the picture... I'm not that OCD about that, but as I said, I think a different finish (or any finish, really!) would be welcome.

I'm very OCD about scratches and stuff, even have my Zenesis Standard protected with shrink tubing. H3ll I would even pay more if necessary to get one scratch free and in a finished state. :)
 

Fisty

Ultra Member
ECF Veteran
May 13, 2012
2,811
6,475
Rochester, NY, USA
The nice thing about aluminum is it's very easy to work. Just grab a silver polishing cloth from the jewelry department of any superstore and you can polish that baby to a mirror in a couple minutes. Or ask your wives, they probably have some laying around. I have 3 or 4 I've collected over the years. Just don't use that cloth on the steel parts if you intend on using that cloth again on your silver or gold jewelry.. ferrous metal particles on or imbedded in non ferrous metals like gold or silver will cause them to pit when heated to soldering temperatures. The aluminum parts are fine, aluminum is non ferrous.
 

grruss

Vaping Master
ECF Veteran
May 23, 2012
4,388
9,121
Grand Rapids
www.mister-e-liquid.com
The nice thing about aluminum is it's very easy to work. Just grab a silver polishing cloth from the jewelry department of any superstore and you can polish that baby to a mirror in a couple minutes. Or ask your wives, they probably have some laying around. I have 3 or 4 I've collected over the years. Just don't use that cloth on the steel parts if you intend on using that cloth again on your silver or gold jewelry.. ferrous metal particles on or imbedded in non ferrous metals like gold or silver will cause them to pit when heated to soldering temperatures. The aluminum parts are fine, aluminum is non ferrous.

I'm thinking that's what God made Cape Cod cloths for...
 

stevo123

Vaping Master
ECF Veteran
Verified Member
May 23, 2012
6,026
5,917
georgia
The nice thing about aluminum is it's very easy to work. Just grab a silver polishing cloth from the jewelry department of any superstore and you can polish that baby to a mirror in a couple minutes. Or ask your wives, they probably have some laying around. I have 3 or 4 I've collected over the years. Just don't use that cloth on the steel parts if you intend on using that cloth again on your silver or gold jewelry.. ferrous metal particles on or imbedded in non ferrous metals like gold or silver will cause them to pit when heated to soldering temperatures. The aluminum parts are fine, aluminum is non ferrous.

yes i got some of those and i can use my dremal to polish the ss parts i think
 

stevo123

Vaping Master
ECF Veteran
Verified Member
May 23, 2012
6,026
5,917
georgia
Hmmm... I will probably need more guidance from you good folks about polishing and stuff. Neither me nor my wife do things like that. Sometimes I wish we knew how to do stuff... we sort of only know what we do at work, and pretty much nothing else, lol... too much to know I guess...

youtube is great for stuff like this elf
 

grruss

Vaping Master
ECF Veteran
May 23, 2012
4,388
9,121
Grand Rapids
www.mister-e-liquid.com
Hmmm... I will probably need more guidance from you good folks about polishing and stuff. Neither me nor my wife do things like that. Sometimes I wish we knew how to do stuff... we sort of only know what we do at work, and pretty much nothing else, lol... too much to know I guess...

I know nothing except what I read on the can the Cape Cods came in. I just ordered them from Amazon and started polishing stuff.

Sent from my Transformer Prime TF201 using Tapatalk 2
 

Lazerrred

Ultra Member
ECF Veteran
Verified Member
Aug 10, 2010
2,660
2,250
Flo SC, USA
Updated paid list from earlier this afternoon prior to the incorrect paid list that was posted.
If this is not up to speed, please copy & paste, and add paid by your username. I think the first 12 are done and have already shipped.

Paid List

1. Kman x1 PAID
2. Fisty x1 Done deal
3. ian74 x1
4. cryptodogg x1
5. quynhwil x2
6. CloudChaser x1
7. elfstone x1 Paid & received.
8. riot4lyf x1
9. caponespopsx1
10. Landlord x1 Paid
11) the ob x1 Paid
12. stevo123 x1 paid and should be delivered tomorrow
13. wasabi5858 x1
14. muddstar x1 Paid
15. patch x1
16. Mac_206 x1
17. benztech83 x1
18. thatick x 1
19. evilferret x 1
20. Tarkvemada x 1
21. MissEmma x 1 ( why not?)
22. Keegan1014 x1 (P)
23. The Hill Giant x 1
24. Lazerrred x 1 PAID
25. Ghost1 x1
26. Ghost2 x1
27. CASEACE79 x1
28. Lady Midnite x 1 PAID
29. Fox5 x1
30. Churros4u x1
31. Trench x1
32. grruss x1-paid
33. Phr0stByte x1
34. jonner x1 paid (sent money order priority mail, today, 8/14)
35. KickServe x1
36. aziffel x1
37. maleko x1
38. legion13 x1
39. aznfknpride x2
40. AmberB x1 (PAID-MO)
41. Tgtsv5 x1
42. ataunton x1 PAID
43. hiatus x1
44. Wharf Rat x1
45. bp400 x1 (PAID-MO)
46. Conard x1 (PAID- MO)
47. Mrephunk x1
48. Jason-tank x1
 

evilferret

Ultra Member
ECF Veteran
Verified Member
Feb 6, 2010
2,404
1,478
Flushing NY
Updated paid list from earlier this afternoon prior to the incorrect paid list that was posted.
If this is not up to speed, please copy & paste, and add paid by your username. I think the first 12 are done and have already shipped.

Paid List

1. Kman x1 PAID
2. Fisty x1 Done deal
3. ian74 x1
4. cryptodogg x1
5. quynhwil x2
6. CloudChaser x1
7. elfstone x1 Paid & received.
8. riot4lyf x1
9. caponespopsx1
10. Landlord x1 Paid
11) the ob x1 Paid
12. stevo123 x1 paid and should be delivered tomorrow
13. wasabi5858 x1
14. muddstar x1 Paid
15. patch x1
16. Mac_206 x1
17. benztech83 x1
18. thatick x 1
19. evilferret x 1
20. Tarkvemada x 1
21. MissEmma x 1 ( why not?)
22. Keegan1014 x1 (P)
23. The Hill Giant x 1
24. Lazerrred x 1 PAID
25. Ghost1 x1
26. Ghost2 x1
27. CASEACE79 x1
28. Lady Midnite x 1 PAID
29. Fox5 x1
30. Churros4u x1
31. Trench x1
32. grruss x1-paid
33. Phr0stByte x1
34. jonner x1 paid (sent money order priority mail, today, 8/14)
35. KickServe x1
36. aziffel x1
37. maleko x1
38. legion13 x1
39. aznfknpride x2
40. AmberB x1 (PAID-MO)
41. Tgtsv5 x1
42. ataunton x1 PAID
43. hiatus x1
44. Wharf Rat x1
45. bp400 x1 (PAID-MO)
46. Conard x1 (PAID- MO)
47. Mrephunk x1
48. Jason-Tank x1

Think there's a shipped list too somewhere. Not sure if its broken or not though.
 
Status
Not open for further replies.

Users who are viewing this thread