- Status
I'd have to agree, the Panasonic CGR18650CH 2250mah nipple tops are just a hair too long. Looks like I could grind a little bit off of the postive screw or take a little from the neg. isolator, and all should be good.
Last edited:
For anyone looking for 500 ss mesh- Domtine in the classies is doing a co-op
Got 5 sheets of 6"x9" for a total of $12.77 USD delivered. Computes to be a little less than 2 whole sheets.270 sq. in.
As in all co-ops"let the buyer beware"
Got 5 sheets of 6"x9" for a total of $12.77 USD delivered. Computes to be a little less than 2 whole sheets.270 sq. in.
As in all co-ops"let the buyer beware"
Ok newbies having coil issues first problem is almost always oxidizing. Always use a half life batt on a new coil and pulse dont push the button at first.
Second- top coil too long between positive and wick. Bend it just a tiny bit if you cant tighten it.
If still having problems the 2 things that help me the most twist the wick a tiny bit and adjust other coils even it is the top one that is showing as a hot spot. Sometimes you can move the short and even everything out. Sorry just some things I have learned from people in this thread wanted to pass on. Dont give up!
Second- top coil too long between positive and wick. Bend it just a tiny bit if you cant tighten it.
If still having problems the 2 things that help me the most twist the wick a tiny bit and adjust other coils even it is the top one that is showing as a hot spot. Sometimes you can move the short and even everything out. Sorry just some things I have learned from people in this thread wanted to pass on. Dont give up!
Last edited:
guys i need something to buy.
was gonna buy a picollo spheroid combo but the spheroids sold out, and i already have more mods than atomizers (my paps is naked, tho looking forward to a synthesis)
still waiting for paypal to verify me.
so what can i buy tonight? i got the itch.
was gonna buy a picollo spheroid combo but the spheroids sold out, and i already have more mods than atomizers (my paps is naked, tho looking forward to a synthesis)
still waiting for paypal to verify me.
so what can i buy tonight? i got the itch.
There is a empire mod and extra sleeve I have been dying for in the classies.
Get one of them ody clones from stormy's for $50. All GG parts are interchangeable too. I hear it's a sweet atty for the price and it's in stock!
Hmm why dont you do the internet verification? Only tskes a couple min. Still gonna take joker 3 orr4 days to verify you.
Ladystrick9- here's another way to get a really good wick. This method is not posted on your info sheet. First heard about it from Pete54 over on IVC. Called the burrito method. Works really great for me
This does several things
1. can lay down the mod on it's side without flooding for a long time
2. wicks a little better for chain vaping
3. Uses less mesh material-thus faster heating of coil
4. No leaking back into the tank so the e-liquid stays the right color.
Take a length of 3mm silica, cut a piece of 400 or 500 mesh about 25 to 30 mm, roll the mesh with the silica in it very tight to fit in wick hole. do whatever coil you normally do i.e. 4/3 or 5/4 for the ohms you want and vape away.
I've also found that the 32 twisted gets gunked up way too fast causing flavor change. Using 30 IMO is the best all around.
This does several things
1. can lay down the mod on it's side without flooding for a long time
2. wicks a little better for chain vaping
3. Uses less mesh material-thus faster heating of coil
4. No leaking back into the tank so the e-liquid stays the right color.
Take a length of 3mm silica, cut a piece of 400 or 500 mesh about 25 to 30 mm, roll the mesh with the silica in it very tight to fit in wick hole. do whatever coil you normally do i.e. 4/3 or 5/4 for the ohms you want and vape away.
I've also found that the 32 twisted gets gunked up way too fast causing flavor change. Using 30 IMO is the best all around.
Just do this method. https://www.netidme.com/ so easy then create a link for joker
Have you ever had one or held one
if you really love America your gonna have to love moonshine.
Phil Robertson for President.
Silica has a taste to me. Thats why I got away from carto and silica. I cannot stand the taste. I think this method takes away from having a genesis atty. My 2 cents. Also, I agree twisted gunks up. But, I will gladly take the 2 min to put on a new coil on every 3 days for the great taste it provides.
Keegan sre you about to crush my dream of owning a empire? The answer is no......
QUOTE=Keegan1014;8160495]Have you ever had one or held one
if you really love America your gonna have to love moonshine.
Phil Robertson for President.[/QUOTE]
QUOTE=Keegan1014;8160495]Have you ever had one or held one
if you really love America your gonna have to love moonshine.
Phil Robertson for President.[/QUOTE]
- Status
Similar threads
- Locked
