The " Infinity " Coming soon to Notcigs

Status
Not open for further replies.

salemgold

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Jul 5, 2010
28,155
63,784
South Carolina
Here I am !!!!!!!!! I've been stalking....Whoot !!!!!!!! Score !!!!!!!!! The local Dodge dealer wanted beaucoup buckaroos for some liscense plate light pigtails..Found 2 in Arizona for 1/3 the price...They're here so maybe my Dodge will pass inspection now!! I received the cobalt blue, tapered, blown glass drip tip today as well..thecig I do believe...It fits a tad off kilter so I lined it up too lessen the vaping angle...I filled a Boge Carto and haven't dripped it yet...I here the juice just slides right on in...A problem I've avoided by using drip tips from Super-T.....I did however encounter pooling in the tip with others I'd purchased..Very slick and smooth on the lips and no heat transfer..I can hold the button down forever so no heat and I like it so far......Most importantly my Infinity has returned too the fold....I stabbed in a set of batts and screwed on my meter....Right off the bat the meter didn't make contact...WTF?? A little fiddling and it's good...The connection looks deeper and I can tell it's new...The Boge fires right off even if you back it off a bit...Airflow is excellent snugged down properly...soo GOOD!! It seems too also have a new dial....a little stiffer than the other one....voltage is 4.7 when marks are aligned...Someone in Cali mentioned a freebie too cover the shipping....I got my tool back so I'm not screaming about that.....sticky notes for b-day presents though are a good idea!! I wanna run her in for a bit with the Boge but will eventually give the IKV 510 Dripper @ 2.5 a go. The Boges are good though...I'm still using the original Infinity Boge on the Buzz...Thanks for getting it sorted out Mike.
I've been providing care for my Mom for a few years too further complicate my life...Dentist yesterday and hair salon today...Hopefully I can get around too my chores as well...I'm also selling my garden tractor{ IH Farmall 140} and looking for a small diesel 4X4 with a front end loader....I live off the road a bit and have a creek on my driveway...I also do quite a bit of landscaping so a loader is much needed...Wish me luck...I'm diligent when spending that hard earned cash and will get a good deal...Well it's off too the landfill to rid myself of some construction debris....Good day too my Infinity Infidels and the Buzz Army...SALUTE!!!!!!!

Good to see you LD! Too bad you are so far away. We could really use that tractor here!
 

El Dee

Ultra Member
ECF Veteran
Verified Member
Apr 1, 2010
1,700
12,261
65
DIXIE
Salem I'm actually looking at one in Salley, SC....I asked how far from I-95 and they didn't know exactly where it was....Not a good sign....I also ordered some parts for my Cub lawn tractor from your town!! I knew I'd heard the name of the town and eventually it dawned on me...Parts supposedly in stock took a month too cross one State Line.......Dangitt Man!!! They're still un-installed......I got stuff backing up!!!!!!!!!!!!!!!!!!!!!

Last evening I ran across a thread berating the Infinity....Yeah my blood pressure got up a bit...The older and wiser El Dee kept his mouth shut....Whoda thunk it ?? That other PV they were lauding costs as much as two Infidels...Is it 2X better..???..Still when I get my finances back on par I'ma getting one of them high dolla deals.....Or not...........

Happy to report the Infinity is Rockin' and Rollin"....All is good down here at the Evel Compound...Heckfire the temperature is even creeping up.....Heck too the YEAH!!!!!!!!!
 

hairball

ECF Guru
ECF Veteran
Verified Member
Sep 17, 2010
13,110
7,458
Other Places
Received my second Infinity today. I need to send my copper one back for repair...the airdraw problem. I would have done it sooner but couldn't put it down. Now I have my black one to tide me over...and my Buzz's of course. I still can't decide what I like better, The Infinity or The Buzz.....hmmmm....it's a tie.
 

windylou723

Senior Member
ECF Veteran
Verified Member
May 14, 2009
181
6
East Central MN, USA
I had to send my first Infinity back because it didn't work at all. I just got it back yesterday, but it's not the same one that I ordered. I ordered a 901 connection, chrome body with brass end caps. When I sent it back, I asked that it come back with all chrome (chrome body and chrome end caps), and I had heard others asking that a slot be put in for using KR808 cartos, so I asked for that too. What I got back was a 510 connection, with chrome body and brass end caps :(

I have let them know about this mix-up yesterday, and am waiting to hear back from them.
 

Ruppy

Ultra Member
ECF Veteran
Dec 1, 2010
2,972
3,439
WV
I had to send my first Infinity back because it didn't work at all. I just got it back yesterday, but it's not the same one that I ordered. I ordered a 901 connection, chrome body with brass end caps. When I sent it back, I asked that it come back with all chrome (chrome body and chrome end caps), and I had heard others asking that a slot be put in for using KR808 cartos, so I asked for that too. What I got back was a 510 connection, with chrome body and brass end caps

I have let them know about this mix-up yesterday, and am waiting to hear back from them.
Sounds like yours got mixed up with someone else.... Id be willing to bet someone else is saying "hey wheres my 510....."

Not sure if you will here back till Monday though. Depends on if mike checks the mail over the weekend. Even then not sure he will have the info without going to the office.

BTW sorry to hear about the mixup.....I just got mine back yesterday as well. Mine is back in tip top shape now.
 

BuzzKill

Unregistered Supplier
ECF Veteran
Nov 6, 2009
7,412
5,145
65
Central Coast Ca.
www.notcigs.com
I had to send my first Infinity back because it didn't work at all. I just got it back yesterday, but it's not the same one that I ordered. I ordered a 901 connection, chrome body with brass end caps. When I sent it back, I asked that it come back with all chrome (chrome body and chrome end caps), and I had heard others asking that a slot be put in for using KR808 cartos, so I asked for that too. What I got back was a 510 connection, with chrome body and brass end caps :(

WOW really !! did you have the notes on the RMA form ?
Sorry for the mixup , email me and we will get it sorted out for you . --------------------------------

I have let them know about this mix-up yesterday, and am waiting to hear back from them.
 

BuzzKill

Unregistered Supplier
ECF Veteran
Nov 6, 2009
7,412
5,145
65
Central Coast Ca.
www.notcigs.com
I bet you someone got a 808 one and not a 510 ! we put them on a bench with the paperwork when they are ready for packing , the only thing I can think of is that they got mixed up somehow ?

I will check with work tomorrow and track down the units that shipped that day to see WTH happened !
Sorry.
 

salemgold

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Jul 5, 2010
28,155
63,784
South Carolina
Salem I'm actually looking at one in Salley, SC....I asked how far from I-95 and they didn't know exactly where it was....Not a good sign....I also ordered some parts for my Cub lawn tractor from your town!! I knew I'd heard the name of the town and eventually it dawned on me...Parts supposedly in stock took a month too cross one State Line.......Dangitt Man!!! They're still un-installed......I got stuff backing up!!!!!!!!!!!!!!!!!!!!!

Last evening I ran across a thread berating the Infinity....Yeah my blood pressure got up a bit...The older and wiser El Dee kept his mouth shut....Whoda thunk it ?? That other PV they were lauding costs as much as two Infidels...Is it 2X better..???..Still when I get my finances back on par I'ma getting one of them high dolla deals.....Or not...........

Happy to report the Infinity is Rockin' and Rollin"....All is good down here at the Evel Compound...Heckfire the temperature is even creeping up.....Heck too the YEAH!!!!!!!!!

Dang LD, I have never heard of Salley but I have heard of I-95.:) I could not imagine a place in my town that sells tractor parts? Are you sure it is in my town? There is literally nothing here. I so wish that I could sell and move back to the coast! Wait a minute! Is it a JD tractor? I know that place well.
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,747
50,658
Wash
Dang LD, I have never heard of Salley but I have heard of I-95.:) I could not imagine a place in my town that sells tractor parts? Are you sure it is in my town? There is literally nothing here. I so wish that I could sell and move back to the coast! Wait a minute! Is it a JD tractor? I know that place well.

Here it is.

SAlleySC.jpg
 

El Dee

Ultra Member
ECF Veteran
Verified Member
Apr 1, 2010
1,700
12,261
65
DIXIE
Salem the site in your hometown is ordering parts in and reshipping them..Web based middleman that is first up on a google for Cub Cadet parts...forever and a day I tell you...

SC the place in Salley is Rhinehart's....It's a small Ford tractor that I've always been rather fond of..Looks like the price is gonna stay above the sane range so I may never see Salley..I had a trailer outside Manning on Lake Marion for a few years....Thank you Hurricane Hugo...A pine tree sliced it in 1/2....I was honeymooning in Sarasota, Fla. as Hugo approached..We bailed for Daytona and watched the edge of it approach from the Boot Hill Saloon...Then we bailed for Manning..I spent my last night there the night before it got destroyed..I got an Uncle in Myrtle Beach...contimplated going down there last night too see Hellyeah at the House of Blues...I passed on that..
 

salemgold

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Jul 5, 2010
28,155
63,784
South Carolina
Wow Salem. I think I'd be moving after that one.

Ha! I did move about 20 years later. I moved inland to be closer to my aging mom. Now my son had my grandson 2 years ago and I would love nothing more then to move back to the coast. If I could only sell my house :)
 
Status
Not open for further replies.

Users who are viewing this thread