RDA The Marquis

[67Tele]

Good deal 67tele! Not sure what you mean on wrapping the tabs thing? Do you mean mounting the coil? I love the ease of build on this thing. I have had none easier than this.

I'll snap a pic or two when I rebuild it tonight. Probably do a 4/5 wrap and see how that turns out.

Yeah, catching the wire around the tabs on positive. At first I was taking the screw all the way out and couldn't get them to stay. The next morning after a good nights rest I only unscrewed it part way and it was so much easier. It was about 2 minutes to make the coil and mount it. Another minute to admire my handy work...hehe.

Thanks

 

[67Tele]

That's will within range for both devices!

+1

you'll be fine

Thanks guys!

 

[jaxgator]

Yeah, catching the wire around the tabs on positive. At first I was taking the screw all the way out and couldn't get them to stay. The next morning after a good nights rest I only unscrewed it part way and it was so much easier. It was about 2 minutes to make the coil and mount it. Another minute to admire my handy work...hehe.

Thanks

Ok, yeah, that's what I thought you meant. It makes for such an easy build. I don't remove the screw completely myself either like Phil did in his video.

 

[UKPaul]

The Marquis is a an absolute pleasure to build on guys.
28g Nickel - 3mm dia - 8 wraps - 0.18 ohms.

 

[67Tele]

Gorgeous man!

 

[Unforeseen]

Moved to rda

 

[AgentZen]

Every time I see a vertias on a mod, it looks like its on a regulated mod. Would this be a good rda for a mech mod? I Just don't see anyone using it on one so it's got me wondering. Expecially since I just ordered a clone to check out.

 

[Debadoo]

I'll be getting a bf'd clone from chowderhead as well, but have noticed that most of y'all are using 26g, some 28. The only kanthal I have right now is 30g, will this be difficult? Should I get some 26 or 28? I'll likely be building in the 1.5 - 2 ohm range, will try single and dual

Have been wanting one for awhile now, so glad to see most are loving it!

 

[AgentZen]

Can anyone tell me the diameter of the top cap with the slightly raised 510 connection. Would a 12mm OD drip tip be too big? What about a 10mm Drip tip?

 

[jaxgator]

Every time I see a vertias on a mod, it looks like its on a regulated mod. Would this be a good RDA for a mech mod? I Just don't see anyone using it on one so it's got me wondering. Expecially since I just ordered a clone to check out.

 

[Croak]

I'll be getting a bf'd clone from chowderhead as well, but have noticed that most of y'all are using 26g, some 28. The only kanthal I have right now is 30g, will this be difficult? Should I get some 26 or 28? I'll likely be building in the 1.5 - 2 ohm range, will try single and dual

Have been wanting one for awhile now, so glad to see most are loving it!

Just twist your 30ga, ohms out about the same as 28ga.

 

[Debadoo]

Just twist your 30ga, ohms out about the same as 28ga.

Thanks. Haven't tried twisting, but may give it a shot. heard today that some folks are preferring it at sub ohm, will just have to play with it I reckin and see what I like. But good to know where other's are finding that sweet spot on it. I'm pretty new to rebuilding.

 

[Croak]

It's dead simple to do. Need a drill, an allen key, some pliers and Bob's your uncle.

 

[Debadoo]

thanks! I'll check that out and maybe give it a try. I know lots of folks like the twisted coils.

 

[AgentZen]

Best build for flavor? I've had good success with sleeper builds (spaced apart coils) providing lots of flavor on other RDAs, and it looks like it'd be easy to accomplish in the marquis. Anyone tried it and have an input? Or what do you guys build ot get the best flavor?

 

[Wolfenstark]

Mines on the way.
Are people getting a length of wick folding it in half and pushing the bend through the vertical coils or just the usual wick and putting it through the coils ?

 

[67Tele]

Hey
I've only done vertical coil on mine. I cut about an 1/8" - 3/16" wide KGD, pulled both thicker sides off then place the middle of the wick over the coil and use the smallest drill bit i have to push it folded down the coil. Sometimes I need to pull a sliver more off the KGD if I'm getting too much resistance. Been using a 4mm coil and am finding that if I don't stuff it with KGD it's working a lot better. Since it's single coil I put a little strip of cotton in the empty well.

I love this dripper!

 

[katarax]

Ive been messing around with wicking, but i still can't seem to find a satisfying method that wicks well.

Problem is that the top of the wick is drying out much faster than the bottom so there is just a concoction of juice down in the well that isn't being fully vaporized. I've had better luck with a single coil but i am still trying to find the best method!

Let me know what you guys have found

 

[Magic School Bus]

Is eciggity the only reasonably priced company that sells the marquis clone?

 

[67Tele]

GoodeJuice has one: https://www.goodejuice.com/ecigarette-atomizers/rebuildable-atomizers/marquis-atomizer

Haven't tried it though.