Hey everyone, I'm a big fan of RBA tanks attys and I've been interested in the MISTer Silica Hybrid for a while now but was hesitant to drop that much for just one tube and an atty that would only work on that one tube. Then I was just surfing the web a few weeks ago and just happened across the MISTer 510 being talked about on the UK Vapers forum and I ordered one from FinnVape and love it.
I've seen several other people on the forum looking for a tank to add to their collection that is similar to the kayfun, if that is you this will be right up your alley.
Here is the video review I posted last night on YouTube for those that are interested in watching:
http://youtu.be/IzROAkv5Ptg
If you just want the low down, here is that:
The MISTer 510 is made by VJ mods based in Finland, the maker of the MISTer Silica Hybrid. It's like the RBA section of the MISTer Hyrbid and has the same brushed satin finish, but this has a 510 adapter AND adjustable airflow that is controlled by an allen screw, unfortunately the a wrench is not included. However, if can be turned with a very small screwdriver. The 510 adapter fit all the mods that I have except for a Z Max.
The airflow control works very well, you can shut off airflow completely or remove the screw completely and you can see straight though the hole. I don't think many people will need to remove it because when you get it you will find it has a very airy draw to start with.
I purchased it from FinnVapes which has 3 day shipping to the US via DHL. The cost with shipping included was $125 (they accept paypal).
http://en.finnvape.com/product/906/
Transparent PMMA tank can be bought separately but they are out of stock as of today. They are an additional 14 euros.
The MISTer 510 will fit the existing tubes of the MISTer Silica Hybrid v3 .... BUT the 510 connection is not available by itself.
Tank capacity is 5 ml with the ss tank it comes with, 3ml of capacity for the clear pmma tank.
It has is silver plated contacts and adjustable 510 pin.
It has 20x1 threading and will hybrid thread onto a mod that is 20x1...which I think should include the Gus, Paps, Caravela, JM22, BaGua, Element and Vanilla.
I've seen several other people on the forum looking for a tank to add to their collection that is similar to the kayfun, if that is you this will be right up your alley.
Here is the video review I posted last night on YouTube for those that are interested in watching:
http://youtu.be/IzROAkv5Ptg
If you just want the low down, here is that:
The MISTer 510 is made by VJ mods based in Finland, the maker of the MISTer Silica Hybrid. It's like the RBA section of the MISTer Hyrbid and has the same brushed satin finish, but this has a 510 adapter AND adjustable airflow that is controlled by an allen screw, unfortunately the a wrench is not included. However, if can be turned with a very small screwdriver. The 510 adapter fit all the mods that I have except for a Z Max.
The airflow control works very well, you can shut off airflow completely or remove the screw completely and you can see straight though the hole. I don't think many people will need to remove it because when you get it you will find it has a very airy draw to start with.
I purchased it from FinnVapes which has 3 day shipping to the US via DHL. The cost with shipping included was $125 (they accept paypal).
http://en.finnvape.com/product/906/
Transparent PMMA tank can be bought separately but they are out of stock as of today. They are an additional 14 euros.
The MISTer 510 will fit the existing tubes of the MISTer Silica Hybrid v3 .... BUT the 510 connection is not available by itself.
Tank capacity is 5 ml with the ss tank it comes with, 3ml of capacity for the clear pmma tank.
It has is silver plated contacts and adjustable 510 pin.
It has 20x1 threading and will hybrid thread onto a mod that is 20x1...which I think should include the Gus, Paps, Caravela, JM22, BaGua, Element and Vanilla.
Last edited:
