The REO Lounge - Part IV

[jensy]

I have always used VV/VW mods so I have a couple of questions about my REO mini . I have read so much but I think I am more confused than when I started. Anyways I have always bought 1.8 coils so when I did my build it came in at 1.78 perfect I thought. However with my other devices I was able to play with the voltage and not I can't so should I be looking at a different resistance for my build. I like a hot vape and I want flavor, its all about the flavor. I do not lung hit only mouth hits and out my nose. I do not want to sub ohm because quite frankly I do not know enough about ohms, batteries, etc. So my question would be by going lower ohm will I get more heat and more flavor? I am using a RM 2 .

The other questions is I am using a AW 18490 3.7V 1100mah is that ok ? When I use my VV/VW my mod would just stop working when my battery was done so is it o.k to run my mini the same way or should I somehow know when to change it out before it is empty?

Sorry I know these sound stupid but after reading so so much I still have these questions. I asked my husband who is a still a smoker about this and he gave me a blank stare , shrugged his shoulders and continued doing so I am really at your mercy here if you don't mind .

 

[Sterno]

good morning guys and gals

 

[Sterno]

hey there Torey

 

[pwheeler]

Good morning, Reo friends! I didn't get home from work until around 7:30 last night. I ate dinner, showered and went to bed! I was beat! I hope you all have a fantastic day today! TGIF!

 

[pwheeler]

I have always used VV/VW mods so I have a couple of questions about my REO mini . I have read so much but I think I am more confused than when I started. Anyways I have always bought 1.8 coils so when I did my build it came in at 1.78 perfect I thought. However with my other devices I was able to play with the voltage and not I can't so should I be looking at a different resistance for my build. I like a hot vape and I want flavor, its all about the flavor. I do not lung hit only mouth hits and out my nose. I do not want to sub ohm because quite frankly I do not know enough about ohms, batteries, etc. So my question would be by going lower ohm will I get more heat and more flavor? I am using a RM 2 .

The other questions is I am using a AW 18490 3.7V 1100mah is that ok ? When I use my VV/VW my mod would just stop working when my battery was done so is it o.k to run my mini the same way or should I somehow know when to change it out before it is empty?

Sorry I know these sound stupid but after reading so so much I still have these questions. I asked my husband who is a still a smoker about this and he gave me a blank stare , shrugged his shoulders and continued doing so I am really at your mercy here if you don't mind .

I would coil up in the 1Ω range for a warmer vape. Not too low to eat up your battery three times a day, but I think it'll improve the vape quality. Your mod will not stop firing like a vv/vw mod, so you just need to know when vape quality is going down, or check out your battery with a meter a couple times a day. After awhile, you'll just know when it's time to change up. Don't run a battery below 3.2V. If you don't have a meter, just pull the battery and put it in a mod that reads battery voltage, or your charger if it has the digital readout. In a short time, you'll know when to pull it and change it out based on your vaping that you do during a normal day. Mine will last me all day, but I use 2 Grands each day and use 18650s, not the 18490s, so you'll have to set your own time frame. Good luck and happy vaping!

 

[pwheeler]

Good morning, Scott and Torey! You are up early, or up late!

 

[Rat2chat2]

Jensy, I'm sure someone will be able to help you with your questions. I am not really qualified to answer because I still have lots of questions myself. I use the rn2 also and I have noticed a much warmer vape when I get a build around 1.0Ω. I usually try for around 1.3Ω. I know several others here have and use a vv so I am sure they will help you. I look forward to the answers so I can learn something too.

There are several YouTube's on reo vv that might also be helpful. Just trying to help.

 

[Rat2chat2]

Good morning, Scott and Torey! You are up early, or up late!

I tried to sleep but the dog was snoring so loud I finally gave up after a hour and decided I might as well have a cup of coffee. I am sitting here drinking it and the same dog is asleep on the couch and not a darn snore to be heard. Grrrrrrr

 

[Sterno]

got back in some DIY and doing pretty good so far

 

[Della Cirque]

Good morning, REOvil!


Jensy- I vaped at 1.8 before the RM2's came out too. After fiddling with different coils for a few months I've settled in at 1.2, warm and still plenty of flavor. Like Paul said, don't run your battery all the way down. When you feel a drop off in vapor production, it's probably time to change batteries. (mine get changed at about 3.7ish) Welcome to REOvil!

 

[Sterno]

Good morning, REOvil!


Jensy- I vaped at 1.8 before the RM2's came out too. After fiddling with different coils for a few months I've settled in at 1.2, warm and still plenty of flavor. Like Paul said, don't run your battery all the way down. When you feel a drop off in vapor production, it's probably time to change batteries. (mine get changed at about 3.7ish) Welcome to REOvil!

morning Jen

 

[Della Cirque]

Good morning, Scott!

 

[classwife]

Hello


There is no sleeping late here for me...
Cat thinks it's his job to pull the covers off at about 5:30
Even if I can convince him I don't want to get up...
once the sun starts it's day, the cockatoo thinks he has to scream to greet it...over and over and over and over...

 

[jensy]

Thank you everyone for your advice. It is truly appreciated .

 

[boilednuts]

Anyone into Oakley merchandise? Check here http://oakleyvault.com/

EVERYBODY HAVE A MOST EXCELLENT WEEKEND!!!!!!!

 

[NatGasMan]

Hello everyone! I hope y'all have a great weekend!

 

[PapawBrett]

Good Evening REOVille. I have a question about a competitor, if he's actually called that. PDib is making a Wooden Box Mod called a 'dibi'. Does anyone know if there is a Manufacturer, by name, or is this just some guy in his garage ?

 

[Sterno]

Good Evening REOVille. I have a question about a competitor, if he's actually called that. PDib is making a Wooden Box Mod called a 'dibi'. Does anyone know if there is a Manufacturer, by name, or is this just some guy in his garage ?

sorry Brett never heard of him

 

[Sterno]

although it does sound like a guy in his garage LOL

 

[Sterno]

good evening everyone