Mine says "Processing" but I'm not sure when it was changed. Pre Order Status section says the same as it had for some time.
- Status
Mine says "Processing" but I'm not sure when it was changed. Pre Order Status section says the same as it had for some time.
Yeah I looked at that and said H^&* NO .Not wasting any money on that FT thing.
Thanks Exhaler. My intention was to cancel my order since my EHPRO Lite is working so well. But it says that the order is no longer editable so I guess Im stuck with it. Oh well. Rather be stuck with an R91 than a piece of crap.
You will be stuck with an excellent vape.Trust me,you will not be disapointed when you get it and it will have been well worth the wait.
noob question, what's the difference between the russian 91% and the EHPRO Kayfun Lite?
The same diff as a Kayfun Lite and the 91%:
unlike the SM Kayfun lite or clones, it retains airrflow control. Both still use a fill-screw on the base.
unlike the SM Kayfun lite or clones, it retains airrflow control. Both still use a fill-screw on the base.
I would say that makes it better (dont forget the adjustable center pin), except for the finish they put on it. Not digging the gray look of the R91
Depends on who you ask. <shrug> THis is *ALL* subjective.
I like my 91%, but I liked my Rocket as well. Is $70 "better" than $15? When? Why? TO whom?
I look forward to getting a cheap FT Kayfun 3.1es clone as well. And, my naughtyfun are enroute as well.
I like my 91%, but I liked my Rocket as well. Is $70 "better" than $15? When? Why? TO whom?
I look forward to getting a cheap FT Kayfun 3.1es clone as well. And, my naughtyfun are enroute as well.
My R91% finish goes perfect with my satin ELA.That is the biggest gripe about the 91's,the finish on them,with the exception of those who have a satin finish MOD.
I like mine matte also. As soon as I scratch this thing though(and I will, one is going to be living on my brass chemesis beater mod) it's getting brushed.
I got my r91 in yesterday. I am more than disappointed. The finish is absolute garbage. It came pre-scratched and I can tell that it will not hold up well. Not even close to the media blasted finish of Super T, GP, or the Kayfun Beta. The adjustable center pin is an absolute joke. If you loosen it at all the positive portion of the atty deck will come loose and cause shorting issues. When it's fully tight, it's slightly recessed from the 510 threads, making it very difficult to make good contact without creating shorts.
If it's really true that someone left Svoemesto and created this to be a quality atomizer, then there is a good reason they left Svoemesto to begin with.
That all being said, I got exactly what I paid for... a poorly made chinese clone. It did come in a nice box though
If it's really true that someone left Svoemesto and created this to be a quality atomizer, then there is a good reason they left Svoemesto to begin with.
That all being said, I got exactly what I paid for... a poorly made chinese clone. It did come in a nice box though
I am sure you can flip it right now for all you paid for it - plus a solid 10%
I'm not a fan of the finish either, but I'm not having the center post issue at all(I'm only through three tanks and two builds though).
As for flipping it, put it up in the classies and watch it go with in the hour.
Let me know in advance what time your posting it and I may have to jump on it. I'd even let you keep the box.
As for flipping it, put it up in the classies and watch it go with in the hour.
Let me know in advance what time your posting it and I may have to jump on it. I'd even let you keep the box.
i was going to suggest vaperev but, i now see they only have the deck screws in the parts kit for the KFL, which im sure would work for the 91%. but as far as a filler hole screw i have no idea, good luck with your hunt!
I am not sure of the exact size, but my instincts tell me it's an M3x4mm flat head screw. I would confirm this before ordering, but here is one place you can buy from that does not have a minimum order, although they do charge a flat rate shipping charge: Stainless Steel A-2
I got my r91 in yesterday. I am more than disappointed. The finish is absolute garbage. It came pre-scratched and I can tell that it will not hold up well. Not even close to the media blasted finish of Super T, GP, or the Kayfun Beta. The adjustable center pin is an absolute joke. If you loosen it at all the positive portion of the atty deck will come loose and cause shorting issues. When it's fully tight, it's slightly recessed from the 510 threads, making it very difficult to make good contact without creating shorts.
If it's really true that someone left Svoemesto and created this to be a quality atomizer, then there is a good reason they left Svoemesto to begin with.
That all being said, I got exactly what I paid for... a poorly made chinese clone. It did come in a nice box though
See post #294 back on page 30, that might help with the positive post issues.
That is quite redeeming, I'll have to play with it when I get a chance. Thanks for pointing that out.
- Status
Similar threads
