About a month and a half ago, a forum member contracted with me to make him a purpose built device to accept two CR2's for 6 volt vaping (it also accepts one 14500 for 3.7 vaping). This is the end result of my work and I hope he is very pleased with it!
I hereby introduce to you the Super-Six!
Specs-
-Utilizes two 3.0 volt CR2 batteries (aka 15270) for six volt vaping or one protected 14500 (900mah) for 3.7 volt vaping.
-Same length as the T-1 without a sleeve!
-Three machined in 30 degree Vent holes to direct away from your face in case of battery failure
-Just over 17mm thick! In comparison, the BB which takes the same batteries is approx. 22mm in diameter!
-Entire adapter milled from billet stock with machined in threads. They are not a cap with a press in two dollar atomizer thread adapter as so many companies use.
-801 adapter works with all types of 801 atomizers, DSE801, BE112, 201 etc.
-Button will not break if dropped
-Optional Brass Cap and button
-Works with cartomizers on the 901
-Available in 510, 901 or 801 with adjustable draw
-No plastic caps
-Semi recessed and protected button to prevent misfires.
-All mechanical: No wires, no solder
-Adjustable button for both throw and spring rate
-Nearly 1.5 mm thinner then the Super T-1
I am going to accept a small number of pre-orders on the new Super-Six. Anticipated ship time is 4-6 weeks. As i stated above, i'm not a big fan of pre-orders due to the wait, but i know some people have been messaging me and really want to put in an order on these.
Here is the link to my website where i now accept credit cards. Please inform me if you have any problems.
Super T, Innovative manufacturer of Personal Vaporizer products.
Out of fairness to those waiting on orders of the T1, i notified them all that i was developing a device that would eliminate the need for the sleeve, and almost all pending orders switched to this new device, a testament to Zofryer's brilliant idea it was to create such a device!
Below are some pictures of the Super-Six in 901 with the optional brass caps and a 510 with aluminum caps. Note: The brass tip pictured is not currently for sale. I really should make up a batch of those one of these days..sigh...
I hereby introduce to you the Super-Six!
Specs-
-Utilizes two 3.0 volt CR2 batteries (aka 15270) for six volt vaping or one protected 14500 (900mah) for 3.7 volt vaping.
-Same length as the T-1 without a sleeve!
-Three machined in 30 degree Vent holes to direct away from your face in case of battery failure
-Just over 17mm thick! In comparison, the BB which takes the same batteries is approx. 22mm in diameter!
-Entire adapter milled from billet stock with machined in threads. They are not a cap with a press in two dollar atomizer thread adapter as so many companies use.
-801 adapter works with all types of 801 atomizers, DSE801, BE112, 201 etc.
-Button will not break if dropped
-Optional Brass Cap and button
-Works with cartomizers on the 901
-Available in 510, 901 or 801 with adjustable draw
-No plastic caps
-Semi recessed and protected button to prevent misfires.
-All mechanical: No wires, no solder
-Adjustable button for both throw and spring rate
-Nearly 1.5 mm thinner then the Super T-1
I am going to accept a small number of pre-orders on the new Super-Six. Anticipated ship time is 4-6 weeks. As i stated above, i'm not a big fan of pre-orders due to the wait, but i know some people have been messaging me and really want to put in an order on these.
Here is the link to my website where i now accept credit cards. Please inform me if you have any problems.
Super T, Innovative manufacturer of Personal Vaporizer products.
Out of fairness to those waiting on orders of the T1, i notified them all that i was developing a device that would eliminate the need for the sleeve, and almost all pending orders switched to this new device, a testament to Zofryer's brilliant idea it was to create such a device!
Below are some pictures of the Super-Six in 901 with the optional brass caps and a 510 with aluminum caps. Note: The brass tip pictured is not currently for sale. I really should make up a batch of those one of these days..sigh...
Last edited:
